Coilcraft MLC7540 Shielded power inductor Datasheet

Document 920 -1
Shielded Power Inductors – MLC75xx
•
•
•
•
Soft saturation makes them ideal for VRD/VRM applications
Special materials eliminate all thermal aging issues.
AEC-Q200 Grade 3 (−40°C to +85°C)
Saturation current up to 59 Amps
Core material Iron
Weight 0.60 – 0.80 g
Environmental RoHS compliant, halogen free
Terminations RoHS tin-silver over copper. Other terminations
available at additional cost.
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +125°C (ambient + temperature rise)
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhm) SRF typ3 Isat (A) Irms (A)
typ max
(MHz)
10% drop
20% drop
30% drop
20°C rise 40°C rise
4
5
Part number1
Inductance2
(µH)
MLC7532-101NE_
MLC7532-221ME_
MLC7542-311ME_
MLC7542-601ME_
MLC7540-102ME_
0.10±30%
0.22±20%
0.31±20%
0.60±20%
1.00±20%
1.20
2.50
2.30
2.95
4.42
1.40
2.80
2.70
3.80
5.00
140
128
114
96
81
21.0
22.9
12.2
9.9
7.4
38.0
41.0
21.9
15.7
11.3
56.2
59.2
29.8
20.2
15.7
24.9
20.2
20.0
16.7
13.8
32.5
26.5
23.8
21.9
18.2
MLC7540-142ME_
MLC7540-222ME_
1.40±20%
2.17±20%
7.10
11.7
8.00
13.0
76
65
6.3
5.3
11.0
8.3
14.3
11.4
10.6
8.5
14.1
11.3
1. When ordering, please specify termination and packaging codes:
MLC7540-222MEC
Termination: E = RoHS tin-silver over copper
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA‑481 embossed plastic tape.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA‑481 embossed plastic tape. Factory order only, not stocked.
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD­‑A fixture in an Agilent/HP 4284A LCR meter.
3. SRF measured using an Agilent/HP4291A impedance analyzer and a Coilcraft 16193 fixture.
4. DC current at which the inductance drops the specified amount from its value without current.
5. Current that causes the specified temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 920-1
Revised 06/03/15
Document 920-2
Shielded Power Inductors – MLC75xx
L vs Frequency
L vs Current
Inductance (µH)
10
2.17 µH
1.40 µH
1.00 µH
1
0.60 µH
0.31 µH
0.22 µH
0.10 µH
0.1
0.01
0.1
10
1
100
Frequency (MHz)
inches
mm
20
15
10
5
0
0.1
Packaging
MLC7532 350/7″reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 3.3 mm pocket depth
MLC7540 250/7″reel; 1200/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 4.2 mm pocket depth
MLC7542 250/7″reel; 1200/13″ reel Plastic tape: 16 mm wide,
0.35 mm thick, 12 mm pocket spacing, 4.2 mm pocket depth
10
1
0.118
3,0
Recommended
Land Pattern
0.10
µH
2.17 µH
1.40 µH
1.00 µH
0.60 µH
0.31 µH
0.22 µH
25
100
Frequency (MHz)
Temperature Rise vs Current
55
50
45
40
8
10
µH
0.079 ±0.020
2,0 ±0,5
0.098
2,5
30
0.1
0
0.118
3,0
35
0.6
0.2 0 µH
0.3 2 µH
1µ
H
0.079
2,0
0.039 ±0.008
1,0 ±0,2
Dimensions are in
Height max
inches
mm
0.126
3,2
0.157
4,0
0.165
4,2
40
1.00 µH
Height
(see table)
Body
size
MLC7532
MLC7540
MLC7542
45
2.17 µH
0.276
max
7,0
50
1.40 µH
0.295
max
7,5
Equivalent Series Resistance (Ohms)
ESR vs Frequency
Temperature rise (from 25°C)
75xx
– xxxE
35
30
25
20
15
10
5
0
0
2
4
6
12
14
Current (A rms)
Document 920-1
Revised 06/03/15
Similar pages