STMicroelectronics MD2009DFP Low base drive requirement Datasheet

MD2009DFP
High voltage NPN power transistor for CRT TV
Features
■
State-of-the-art technology:
– diffused collector “enhanced generation”
■
Stable performance versus operating
temperature variation
■
Low base drive requirement
■
Tight hFE range at operating collector current
■
Fully isolated power package UL compliant
■
Integrated free wheeling diode
3
1
2
TO-220FP
Application
■
Horizontal deflection output for CRT TV
Figure 1.
Internal schematic diagram
Description
The MD2009DFP is manufactured using diffused
collector in planar technology adopting new and
enhanced high voltage structure. The new MD
product series show improved silicon efficiency
bringing updated performance to the horizontal
deflection stage.
Table 1.
RBE=60Ω typ.
Device summary
Order code
Marking
Package
Packaging
MD2009DFP
MD2009DFP
TO-220FP
Tube
August 2009
Doc ID 16108 Rev 1
1/10
www.st.com
10
Electrical ratings
1
MD2009DFP
Electrical ratings
Table 2.
Absolute maximum ratings
Symbol
Value
Unit
VCES
Collector-emitter voltage (VBE = 0)
1500
V
VCEO
Collector-emitter voltage (IB = 0)
700
V
VEBO
Base-emitter voltage (IC = 0)
7
V
Collector current
10
A
Collector peak current (tP < 5ms)
16
A
Base current
6
A
PTOT
Total dissipation at Tc = 25°C
40
W
VISO
Isolation withstand voltage (RMS) from all three
leads to external heatsink
2500
V
Tstg
Storage temperature
-65 to 150
150
°C
Value
Unit
3.12
°C/W
IC
ICM
IB
TJ
Table 3.
Symbol
Rthj-case
2/10
Parameter
Max. operating junction temperature
Thermal data
Parameter
Thermal resistance junction-case max
Doc ID 16108 Rev 1
MD2009DFP
2
Electrical characteristics
Electrical characteristics
(Tcase =25°C unless otherwise specified)
Table 4.
Symbol
Electrical characteristics
Parameter
Test conditions
Min.
Typ.
Max.
Unit
0.2
2
mA
mA
120
mA
ICES
Collector cut-off
current (VBE = 0)
VCE = 1500V
VCE = 1500V, Tc= 125°C
IEBO
Emitter cut-off current
(IC = 0)
VEB = 5V
40
V(BR)EBO
Emitter-base
breakdown voltage
(IC = 0)
IE = 700mA
10
VCE(sat)(1)
Collector-emitter
saturation voltage
IC = 5.5A ,
IB = 1.4A
2.8
V
VBE(sat)(1)
Base-emitter
saturation voltage
IC = 5.5A ,
IB = 1.4A
1.3
V
DC current gain
IC = 1A,
IC = 5.5A,
IC = 5.5A ,
VCE = 5V
VCE = 1V
VCE = 5V
hFE(1)
VF
(1)
ts
tf
Diode forward voltage
IF= 5.5 A
Inductive load
Storage time
Fall time
IC = 5A,,, fh = 16KHz
IB(on) = 1.5A,, VBE(off) = -2.7V
LBB(off) = 6.2µH
V
18
4.7
5
7
4.5
0.3
1.6
V
6
0.6
µs
µs
1. Pulse test: pulse duration ≤300 µs, duty cycle ≤2%.
Doc ID 16108 Rev 1
3/10
Electrical characteristics
MD2009DFP
2.1
Electrical characteristics (curves)
Figure 2.
Safe operating area
Figure 3.
Derating curve
Figure 4.
Output characterisics
Figure 5.
Reverse biased SOA
Figure 6.
DC current gain (VCE = 1 V)
Figure 7.
DC current gain (VCE = 5 V)
4/10
Doc ID 16108 Rev 1
MD2009DFP
Figure 8.
Electrical characteristics
Collector-emitter saturation voltage Figure 9.
Figure 10. Power losses
Base-emitter saturation voltage
Figure 11. Inductive load switching time
Doc ID 16108 Rev 1
5/10
Test circuits
3
MD2009DFP
Test circuits
Figure 12. Power losses and inductive load switching test circuit
Figure 13. Reverse biased safe operating area test circuit
6/10
Doc ID 16108 Rev 1
MD2009DFP
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
Doc ID 16108 Rev 1
7/10
Package mechanical data
MD2009DFP
TO-220FP mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.5
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
L7
E
A
B
D
Dia
L5
L6
F1
F2
F
G
H
G1
L4
L2
L3
7012510_Rev_J
8/10
Doc ID 16108 Rev 1
MD2009DFP
5
Revision history
Revision history
Table 5.
Document revision history
Date
Revision
11-Aug-2009
1
Changes
First release
Doc ID 16108 Rev 1
9/10
MD2009DFP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10
Doc ID 16108 Rev 1
Similar pages