ETC MOS6020-683MXC Smt power inductor Datasheet

Document 287 -1
SMT Power Inductor - MOS6020 Series
Measuring a mere 2 mm high, the MOS6020 family of
surface mount power inductors offers exceptionally low
DC resistance and excellent current handling.
These magnetically shielded inductors are extremely
space-efficient, with a 6 × 7.1 mm footprint. They are
available in inductance values from 2.2 µH to 470 µH
with saturation current ratings up to 2.15 Amps. Custom
versions up to 4.7 mH are also available.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
Part number1
MOS6020-222MX_
MOS6020-332MX_
MOS6020-472MX_
MOS6020-682MX_
MOS6020-103MX_
MOS6020-153MX_
MOS6020-223MX_
MOS6020-333MX_
MOS6020-473MX_
MOS6020-683MX_
MOS6020-104MX_
MOS6020-154MX_
MOS6020-224MX_
MOS6020-334MX_
MOS6020-474MX_
L ±20%2 DCR max SRF typ3 2 Isat4 4Irms5
(µH)
(Ohms)
(MHz)
(A)
(A)
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
0.035
0.046
0.050
0.078
0.092
0.130
0.182
0.290
0.420
0.520
0.800
1.28
2.00
2.84
4.40
110
85
60
55
36
30
22
20
16
15
13
10
8
7
5
2.15
1.80
1.50
1.28
1.00
0.85
0.72
0.58
0.49
0.40
0.33
0.27
0.22
0.18
0.15
4.1
3.6
3.1
2.7
2.2
1.8
1.4
1.1
0.7
0.63
0.56
0.49
0.42
0.35
0.29
1. When ordering, please specify packaging code:
MOS6020-104MXC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4284A or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops 30% (typ) from its value
without current.
5. Average current for 40°C temperature rise from 25°C ambient.
6. Operating temperature range -40°C to +85°C.
7. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Specifications subject to change without notice.
Document 287-1
Revised 07/30/04
Document 287-2
SMT Power Inductors - MOS6020 Series
Typical L vs Frequency
Typical L vs Current
10000
1000
Inductance (µH)
470 µH
100
100 µH
10
10 µH
2.2 µH
1
0.1
0.1
1
10
Current (A)
0.28
max
7,1
0.030
typ
0,75
XXX
0.24
max
6,0
0.095
max
2,4
0.18
typ
4,5
0.280 min
7,10
0.170
max
4,32
0.100 min
2.54
Recommended
Land Pattern
Tape and reel: 500/7″ reel; 2000/13″ reel 16 mm tape width
For packaging data see Tape and Reel Specifications section.
Specifications subject to change without notice.
Document 287-2
Revised 07/30/04
Similar pages