MSP0625D -60V(D-S) P-Channel Enhancement Mode Power MOS FET General Features ● VDS =-60V,ID =-25A RDS(ON) <45mΩ @ VGS=-10V ● High density cell design for ultra low Rdson ● Fully characterized avalanche voltage and current Lead Free ● Good stability and uniformity with high EAS ● Excellent package for good heat dissipation Application ● High side switch for full bridge converter ● DC/DC converter for LCD display PIN Configuration Marking and pin assignment TO-252 -2Ltop view Schematic diagram Package Marking and Ordering Information Device Marking Device Device Package Reel Size Tape width Quantity MSP0625D MSP0625D TO-252-2L - - - Absolute Maximum Ratings (TC=25℃unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage VDS -60 V Gate-Source Voltage VGS ±20 V ID -25 A ID (100℃) -17.7 A Pulsed Drain Current IDM -60 A Maximum Power Dissipation PD 90 W 0.72 W/℃ EAS 300 mJ TJ,TSTG -55 To 150 ℃ Drain Current-Continuous Drain Current-Continuous(TC=100℃) Derating factor Single pulse avalanche energy (Note 5) Operating Junction and Storage Temperature Range MORE Semiconductor Company Limited http://www.moresemi.com 1/6 MSP0625D Thermal Characteristic Thermal Resistance, Junction-to-Case(Note 2) RθJC ℃/W 1.4 Electrical Characteristics (TC=25℃unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit Drain-Source Breakdown Voltage BVDSS VGS=0V ID=-250μA -60 - - V Zero Gate Voltage Drain Current IDSS VDS=-60V,VGS=0V - - -1 μA Gate-Body Leakage Current IGSS VGS=±20V,VDS=0V - - ±100 nA Gate Threshold Voltage VGS(th) VDS=VGS,ID=-250μA -2 -2.6 -3.5 V Drain-Source On-State Resistance RDS(ON) VGS=-10V, ID=-20A - 37 45 mΩ gFS VDS=-10V,ID=-10A - 25 - S - 3430 - PF - 391 - PF Crss - 272 - PF Turn-on Delay Time td(on) - 12 - nS Turn-on Rise Time tr VDD=-30V, RL=1.5Ω， - 15 - nS td(off) VGS=-10V,RG=3Ω - 38 - nS - 15 - nS - 46 nC - 9.5 nC - 10.5 nC Off Characteristics On Characteristics (Note 3) Forward Transconductance Dynamic Characteristics (Note4) Input Capacitance Clss Output Capacitance Coss Reverse Transfer Capacitance Switching Characteristics VDS=-30V,VGS=0V, F=1.0MHz (Note 4) Turn-Off Delay Time Turn-Off Fall Time tf Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd VDS=-30,ID=-20A, VGS=-10V Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) VSD Diode Forward Current (Note 2) IS Reverse Recovery Time VGS=0V,IS=-10A trr Reverse Recovery Charge Qrr Forward Turn-On Time ton - -1.2 V -25 A - - TJ = 25°C, IF =- 10A - 47 nS (Note3) - 53 nC di/dt = -100A/μs Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t ≤ 10 sec. 3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%. 4. Guaranteed by design, not subject to production 5. EAS condition: Tj=25℃,VDD=-20V,VG=-10V,L=1mH,Rg=25Ω,IAS=33A MORE Semiconductor Company Limited http://www.moresemi.com 2/6 MSP0625D Test Circuit 1) EAS Test Circuit 2) Gate Charge Test Circuit 3) Switch Time Test Circuit MORE Semiconductor Company Limited http://www.moresemi.com 3/6 MSP0625D ID- Drain Current (A) Normalized On-Resistance Typical Electrical and Thermal Characteristics (Curves) TJ-Junction Temperature(℃) Vds Drain-Source Voltage (V) Figure 4 Rdson-Junction Temperature ID- Drain Current (A) Vgs Gate-Source Voltage (V) Figure 1 Output Characteristics Qg Gate Charge (nC) Figure 2 Transfer Characteristics Figure 5 Gate Charge Is- Reverse Drain Current (A) Rdson On-Resistance(mΩ) Vgs Gate-Source Voltage (V) ID- Drain Current (A) Figure 3 Rdson- Drain Current MORE Semiconductor Company Limited Vsd Source-Drain Voltage (V) Figure 6 Source- Drain Diode Forward http://www.moresemi.com 4/6 C Capacitance (pF) MSP0625D Figure 7 Capacitance vs Vds Figure 9 BVDSS vs Junction Temperature ID- Drain Current (A) TJ-Junction Temperature(℃) ID- Drain Current (A) Vds Drain-Source Voltage (V) TJ-Junction Temperature(℃) Figure 8 Safe Operation Area Figure 10 ID Current De-rating r(t),Normalized Effective Transient Thermal Impedance Vds Drain-Source Voltage (V) Square Wave Pluse Duration(sec) Figure 11 Normalized Maximum Transient Thermal Impedance MORE Semiconductor Company Limited http://www.moresemi.com 5/6 MSP0625D TO-252 Package Information Symbol Dimensions In Millimeters Dimensions In Inches Min. Max. Min. Max. A 2.200 2.400 0.087 0.094 A1 0.000 0.127 0.000 0.005 b 0.660 0.860 0.026 0.034 c 0.460 0.580 0.018 0.023 D 6.500 6.700 0.256 0.264 D1 5.100 5.460 0.201 0.215 D2 4.830 TYP. 0.190 TYP. E 6.000 6.200 0.236 0.244 e 2.186 2.386 0.086 0.094 L 9.800 10.400 0.386 0.409 L1 L2 2.900 TYP. 1.400 L3 0.114 TYP. 1.700 0.055 1.600 TYP. 0.067 0.063 TYP. L4 0.600 1.000 0.024 0.039 Φ 1.100 1.300 0.043 0.051 θ 0° 8° 0° 8° h 0.000 0.300 0.000 0.012 V 5.350 TYP. MORE Semiconductor Company Limited 0.211 TYP. http://www.moresemi.com 6/6