ETC2 LED20W-43 Switch mode led drivers with isolation, constant current, dimming & constant voltage Datasheet

LED-20W Series
Switch Mode LED Drivers with Isolation,
Constant Current, Dimming & Constant Voltage
Electrical Specifications
Input Voltage Range:
100-277 Vac Nom. (90-305 V Min/Max)
Input Over-Voltage:
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
>0.90 @ full load, 100V through 277V
Inrush Current:
<15.0 Amps max @ 230 Vac, cold start 25ºC
Input Current:
0.25 Amps max at 120 Vac
Efficiency:
85% typical at max load
Maximum Power:
20W
Line Regulation:
± 2%
Load Regulation:
± 3%
THD:
<
_ 20% @ >
_ 70% load 100-230V, >
_ 80% load 277V
Leakage Current:
300 µA Typical
Hold Up Time:
Half Cycle
Output Protection:
Over-Voltage, Over-Current, and
Short Circuit Protection with Auto Recovery
Environmental Specifications
• Total Power: 20 Watts
• IP66 & NEMA4
• Input Voltage: 100-277 Vac Nom. • High Power Factor
• UL Dry & Damp Location Rated • UL Sign Components Manual
(S.A.M. Models) Models
Constant Current - Product Specifications
Model Number
Output Current Output Voltage Max. Output Typical
(mA ±4%)
Range (Vdc)
Power (W) Efficiency
LED20W-57-C0350-XX
350
19-57
20
84%
LED20W-48-C0350-XX
350
16-48
16.8
83%
Minimum Starting Temp:
-30ºC
LED20W-43-C0460-XX
460
15-43
20
83%
Storage Temperature:
-40ºC to +85ºC
LED20W-40-C0500-XX
500
14-40
20
82%
Maximum Case Temp.
90°C
Humidity:
5% to 95%
Cooling:
Convection
Sound Rating:
Class A
LED20W-22-C0910-XX
910
7-22
20
81%
Vibration Frequency:
5 to 55 Hz/2g, 30 minutes
LED20W-18-C1100-XX
1100
6-18
20
80%
MTBF:
488,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
LED20W-15-C1330-XX
1330
5-15
20
80%
LED20W-13-C1540-XX
1540
4-13
20
79%
5.8 oz (165 grams) typical
LED20W-12-C1660-XX
1660
4-12
20
78%
Weight:
LED20W-36-C0550-XX
550
12-36
20
82%
LED20W-28-C0700-XX
700
10-28
20
81%
LED20W-24-C0700-XX
700
8-24
16.8
81%
LED20W-24-C0830-XX
830
8-24
20
81%
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Constant Voltage - Product Specifications
Model Number
LED20W-12
Ordering Options:
-D:
-PD:
0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
See page 3 for additional specifications.
PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output
side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,
200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications.
Sign Components Manual
•
Output Voltage Output Current
(Vdc ±5%)
Range (mA)
Max. Output
Power (W)
Typical
Efficiency
12
415-1660
20
82%
13
385-1540
20
82%
LED20W-15
15
333-1330
20
83%
LED20W-18
18
275-1100
20
83%
LED20W-22
22
228-910
20
84%
24
208-830
20
84%
LED20W-13
LED20W-24
LED20W-28
•
28
175-700
20
84%
LED20W-36
36
138-550
20
85%
LED20W-40
40
125-500
20
85%
LED20W-43
43
115-460
20
85%
LED20W-48
48
88-350
16.8
85%
LED20W-57
57
88-350
20
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Class 2:
85%
• Indicates S.A.M.
US/Canada
US Only
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED20W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 2 of 4
Dimensions - IN [mm]
0.20 [5]
5.91 Min [150 Min]
WIRE SPECS:
Input Leads: 18 AWG, rated 600 V, 105C, min.
Output Leads: 18 AWG, rated 300 V, 105C, min.
Dimming Leads: 22 AWG, rated 300 V, 105C.
All wires are stranded with solder dipped ends.
Dimming
Purple (+)
Gray (-)
0.79 [20]
Input
White (N)
Black (L)
0.55 [14]
Tc = 90°C max
0.39±0.04 [10.0±1]
0.39±0.04
[10.0±1]
0.20 [5]
1.87 [47.5]
5.91 Min [150 Min]
0.16 [4]
0.39 [10]
1.61 [41]
Power Factor / Load
1.00
35%
0.80
30%
0.70
25%
THD
0.60
PF
THD / Load
40%
0.90
0.50
120Vac
277Vac
20%
0.40
15%
0.30
120Vac
277Vac
0.20
10%
5%
0.10
0.00
50%
60%
70%
80%
90%
Load
100%
Lifetime / Case Temperature
0%
50%
60%
70%
100%
(LED20W-028-C0700-D)
Efficiency
Lifetime (kHrs)
95%
75
60
45
30
90%
50
55
60
65
70
75
80
85
90
UL8750, CSA-C22.2
EN61347
Class B
Class C
120Vac
277Vac
80%
Case Hotspot Temperature (°C)
100%
85%
15
45
90%
UL/CUL
CE
FCC, 47CFR Part 15
EN61000-3-2
EN61000-3-3
115
90
80%
Load
Safety and EMC Compliance
Typical Efficiency / Load
130
0
40
Output
Red (+)
Blue (-)
0.98 [25]
0.55 [14]
3.74 [95]
75%
50%
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
60%
70%
80%
90%
Normalized Output Voltage
100%
UL Conditions of Acceptability
See website for additional information
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED20W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 3 of 4
“-D” Option: 0-10VDC and Resistance Dimming
Parameters
Minimum
Typical
Maximum
0mA
-2.0 V
0mA
—
—
—
2mA
+15 V
1.2mA
Source Current out of 0-10V Purple Wire
Absolute Voltage Range on 0-10V (+) Purple Wire
Sink Current into 0-10V Purple Wire
Typical Dimming Circuit
Dim (+) Purple
LED20W-xxx-Cxxxx-D
IP710 Wall Dimmer
Dim (-) Gray
(Dimmer must be current-sink type control)
Output Current / 0-10VDC Dimming Input
Output Current %
100
90
80
70
60
50
40
30
20
10
0
0V
1V
2V
3V
4V
5V
6V
Dimming Input (Vdc)
7V
8V
9V
10V
Notes:
1.
2.
3.
4.
0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side.
Compatible with most 0-10V Wall Slide dimmers and direct 0-10V analog signal. Recommended dimmer is Leviton IP710 or equivalent
0-10V dimmable version output will be <
_ 10% @ 0-1.0V
0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
LED20W Series
SSL Solutions Faster Than The Speed Of Light®
Pg 4 of 4
“-PD” Option: PWM Dimming
Parameters
Absolute Maximum Voltage Range on PWM Input (Purple Wire)
Input LOW Level Voltage Range (Purple Wire)
Input HIGH Level Voltage Range (Purple Wire)
Current into PWM Input (Purple Wire)
Source Current out of PWM Input (Purple Wire)
PWM Input Signal Frequency
PWM Input Signal Positive Duty Cycle
Minimum
Typical
Maximum
-2.0 V
-2.0 V
+9.0 V
0 mA
0 mA
500 Hz
0%
10 V
0V
10 V
—
—
—
10-90%
+15 V
+5.5 V
+15 V
1.2 mA
2 mA
1500 Hz
100%
PWM Positive Dimming Typical Circuit
PWM (+) Purple
LED20W-xxx-Cxxxx-PD
Output Current / 1.0kHz Positive Duty Cycle
Output Current %
100
90
80
70
60
50
40
30
20
10
0
PWM In
Sink
PWM (-) Gray
0%
10%
20%
30%
40%
50%
60%
Positive Duty Cycle
70%
80%
90%
100%
Notes:
1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side.
2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to dim below 5% at 0% Duty Cycle.
3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted.
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
Similar pages