MSWSE-040-10
Silicon PIN Diode Switch Element
Rev. V1
Features
Supports up to 40 W Power
Low Insertion Loss, 0.25 dB up to 2.7 GHz
Medium Isolation, 11 dB up to 2.7 GHz
RoHS* Compliant
Description
A broadband, high linearity, medium power series
switch element in a 2.0 x 1.3 mm QFN package.
This device is designed for WiMax, Wibro, WLAN,
TD-SCDMA and other wireless infrastructure
applications. It is also suited for 0.1 ~ 3 GHz
applications with up to 40 watts of power.
0805P
Electrical Specifications: TA = +25°C
1
Parameter
Test Conditions
Min.
Typ.
Max.
Units
Breakdown Voltage
IR = 10 µA
250
—
—
V
Forward Voltage
IF = 50 mA
—
900
—
mV
Junction Capacitance
VR = -50 V, 1 MHz
—
0.12
—
pF
Series Resistance
IF = 10 mA, 500 MHz
IF = 50 mA, 500 MHz
—
2.0
0.6
—
1.4
Ω
Lifetime
IF = 10 mA, IR = 6 mA , 50%
—
700
—
ns
I-Region
I-Layer
—
40
—
µs
Insertion Loss
IF = 50 mA, 2.025 GHz
IF = 50 mA, 2.3 - 2.7 GHz
—
0.12
0.25
0.20
0.35
dB
Input Return Loss
IF = 50 mA, 2.025 GHz
IF = 50 mA, 2.3 - 2.7 GHz
15
15
25
20
—
dB
Isolation
VR = 10 V, 2.025 GHz
VR = 10 V, 2.3 - 2.7 GHz
10
9
14
11
—
dB
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MSWSE-040-10
Silicon PIN Diode Switch Element
Rev. V1
Absolute Maximum Ratings1,2
Parameter
Absolute Maximum
Breakdown Voltage
250 V
Forward Current
100 mA
Thermal Resistance
20°CW
Junction Temperature
+175°C
Storage Temperature
-55°C to +150°C
Solder Temperature
+260°C
per JEDEC STD-J-20C
Junction Temperature vs. Input Power
Backside of Board TA = 25°C, Board Thickness 62 mils
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. MACOM does not recommend sustained operation near these
survivability limits.
Typical RF Performance Curves @ +25°C
Insertion Loss
Isolation
Input Return Loss
Series Resistance vs. Current, 500 MHz
2
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MSWSE-040-10
Silicon PIN Diode Switch Element
Rev. V1
Bias Schematic (0.1 - 3.0 GHz)
Parts List
Component
R1
R2
R3
C1,C2,C33
C1,C2,C33
C1,C2,C33
C4,C5
L1,L3
L2,L4
Q1
Q2
U1
Z1
DC1
3
Description
75Ω, 1/2W, 1210 chip resistor
1.2KΩ, 1/10W, 603 chip resistor
1.2KΩ, 1/2W, 1210 chip resistor
56pF, 250VDC Capacitor, 0603 pkg
15pF, 250VDC Capacitor, 0603 pkg
6.8pF, 250VDC Capacitor, 0603 pkg
0.1 µF, 50VDC Capacitor, 0805 pkg
420nH, 340mA, 700MHz SRF Inductor
51nH, 330mA, 2.3GHz SRF, Inductor
50V, 130mA, P-Channel MOSFET
60V, 310mA, N-Channel MOSFET
Hex Schmitt-Trigger TTL Inverter
13V, 2%, 500mW Zener Diode
1W, 5V to 12V DC/DC Converter
Manufacturer
KOA Speer
KOA Speer
KOA Speer
ATC
ATC
ATC
ATC
Coilcraft
Coilcraft
ON SEMI
ON SEMI
Texas Instruments
Philips
V-Infinity
Manufacturer part #
RK73B2ETTD750J
RK73B1JTTD122J
RK73B2ETTD122J
ATC600S560JT250XT
ATC600S150JT250XT
ATC600S6R8JT250XT
ATC0805XR7104KT2AT
0402AF-421XJLW
0402HP-51NXJLW
BSS84LT1
2N7002E
SN74ACT14
BZX79-B13
VBT1-S5-S12-SMT-AFM
3. Use different capacitor values for different frequency bands as follows:
56 pF: 0.1 to 2.1 GHz
15 pF: 0.7 to 5.0 GHz
6.8 pF: 1.5 to 6.0 GHz
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MSWSE-040-10
Silicon PIN Diode Switch Element
Rev. V1
PCB Layout
Schematic
Outline (0805P)
Notes:
1. Dimensions do not include mold flashing.
2. Burrs and dumber shall not exceed 0.002” per surface.
3. Lead co-planarity is 0.003” max.
4
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MSWSE-040-10
Silicon PIN Diode Switch Element
Rev. V1
MACOM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support