LIGITEK LDGM9553-TR1-A02 Surface mount led tape and reel Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SURFACE MOUNT LED TAPE AND REEL
Pb
Lead-Free Parts
LDGM9553/TR1-A02
DATA SHEET
DOC. NO : QW0905-LDGM9553/TR1-A02
REV.
: A
DATE
: 24 - Jul. - 2012
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/11
PART NO.LDGM9553/TR1-A02
Features:
1. Top view LED.
2. white SMT package.
3. Leadframe package with individual 2 pin.
4.Wide viewing angle.
5.Soldering methods:IR reflow soldering.
6.Feature of the device:more light due to higher optical efficiency;extremely
wide viewing angle;ideal for backlighting and coupling in light guide.
Descriptions:
The LDGM9553 SMD has wide viewing angle and optimized light coupling by
inter reflector,The low current requirement makes this device ideal for portable
equipment or any other application where power is at a premium.
Applications:
1. Telecommunication: indicator and backlighting in telephone and fax.
2. Indicators.
3. Switch lights.
Device Selection Guide:
PART NO
MATERIAL
LDGM9553/TR1-A02
InGaN
COLOR
Emitted
Lens
Green
Water Clear
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/11
PART NO.LDGM9553/TR1-A02
Package Dimensions
3.5
1.85
0.9
0.9
2.8
2.2
Cathode Mark
Soldering Terminal
3.2
Andoe
0.9
Cathode
Polarity
0.9
Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted.
2.Specifications are subject to change without notice.
Recommended Soldering Pad Dimensions
4.5
1.5
1.5
2.6
Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/11
PART NO.LDGM9553/TR1-A02
Absolute Maximum Ratings at Ta=25℃
Ratings
Parameter
Symbol
UNIT
DGM
Forward Current
IF
30
mA
Peak Forward Current
Duty 1/14@10KHz
IFP
100
mA
Power Dissipation
PD
120
mW
Reverse Current @5V
Ir
50
μA
Electrostatic Discharge
ESD
500
V
Operating Temperature
Topr
- 20 ~ + 80
℃
Storage Temperature
Tstg
- 30 ~ + 100
℃
Typical Electrical & Optical Characteristics (Ta=25℃)
Items
Symbol
Min.
IF=20mA
525
----
nm
IF=20mA
----
36
----
nm
IF=20mA
VF
2.8
----
4.0
V
IF=20mA
2θ 1/2
----
120
----
deg
IF=20mA
Dominant Wavelength
λD
----
△λ
Viewing Angle
CONDITION
mcd
Iv
Forward Voltage
Max. UNIT
----
1250 1600
Luminous Intensity
Spectral Line Half-Width
Typ.
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2.The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/11
PART NO.LDGM9553/TR1-A02
Luminous Intensity Classification
BIN CODE
W-1
W-2
X-1
X-2
Y-1
Iv(mcd) at 20mA
Min.
Max.
1250
1600
2000
2250
3200
1600
2000
2250
3200
4000
Dominant Wavelength Classification
BIN CODE
1O
1P
1Q
1R
λD(nm) at 20mA
Min.
Max.
519
522
525
528
522
525
528
531
Forward Voltage Classification
BIN CODE
1
2
3
4
5
6
Vf(v) at 20mA
Min.
Max.
2.8
3.0
3.2
3.4
3.6
3.8
3.0
3.2
3.4
3.6
3.8
4.0
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 5/11
PART NO.LDGM9553/TR1-A02
Typical Electro-Optical Characteristics Curve
DGM CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1.0
2.5
2.0
1.5
1.0
0.5
0.0
0.1
1.0
2.0
3.0
4.0
1.0
5.0
10
1000
Forward Current(mA)
Forward Voltage(V)
Fig.4 Relative Intensity vs. Temperature
Fig.3 Forward Voltage vs. Temperature
1.2
3.0
Relative Intensity@20mA
Normalize @25℃
Forward Voltage@20mA
Normalize @25℃
100
1.1
1.0
0.9
0.8
-40
-20
0
20
40
60
80
2.5
2.0
1.5
1.0
0.5
0.0
100
-40
-20
0
20
40
60
80
100
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Fig.5 Relative Intensity vs. Wavelength
Fig.6 Directive Radiation
Relative Intensity@20mA
1.0
0°
-30°
30°
0.5
-60°
60°
0.0
450
500
550
Wavelength (nm)
600
100% 75% 50%
25%
0
25% 50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 6/11
PART NO.LDGM9553/TR1-A02
Carrier Type Dimensions
4.0
2.0
4.0
2.24
ψ1.55
1.75
5.5
12.0±0.3
9.3
4.06
Polarity
3.12
Note : The tolerances unless mentioned is ±0.1mm,Unit=mm.
‧ Packing Specifications
0.2
0.8
0.6
Aluminum Moist-Proof bag
Label
0.8
0.6
0.2
0.4
0.4
Label
Part No.
Description
Quantity/Reel
LDGM9553/TR1-A02
12.0mm tape,7"reel
1500 PCS
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 7/11
PART NO.LDGM9553/TR1-A02
Label Explanation
LIGITEK ELECTRONICS CO., LTD.
Pb
LHY9553/TR1/A
PART :
BIN : Luminous Intensity
LDGM9553/TR1/A-A02
GS1-060288
LOT :
HUE : Dominant Wavelength
GS1-090168
1500
QTY(PCS):
1500
R/18
BIN/HUE :
VF:3.0-3.2
W-1/1N
VF : Forward Voltage
Reel Dimensions
0.2
0.4
0.8
0.8
0.6
0.2
0.4
0.6
2.0±0.5
ψ13.5±1.0
178±1.5
60.0±1.0
13.0±1.0
16.0±1.0
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 8/11
PART NO.LDGM9553/TR1-A02
Box Explanation
1. 4 BAG / INNER BOX
2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm
H
W
L
3. 10 INNER BOXES / CARTON
4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm
L
W
H
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 9/11
PART NO.LDGM9553/TR1-A02
Recommended Soldering Conditions
1. Hand Solder
Basic spec is ≦ 320℃ 3 sec one time only.
2. Wave Solder
Soldering heat Max. 260 ℃
245±5℃ within 5 sec
120 ~ 150℃
Preheat
120 ~ 180 sec
3 PB-Free Reflow Solder
1~5°C/sec
1~5°C/sec
Preheat
180~200°C
260°C MaX. 10sec.Max
6°C/sec
Above 220°C
60 sec.Max.
120 sec.Max.
Note:
1.Reflow soldering should not be done more than two times.
2.When soldering,do not put stress on the LEDs during heating.
3.After soldering,do not warp the circuit board.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 10/11
PART NO.LDGM9553/TR1-A02
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%,
they should be treated at 60 ℃±5 ℃fo r 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd
current should not be allowed to change by more than 40% of its desired value.
Circuit model A
Circuit model B
LED
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 11/11
PART NO.LDGM9553/TR1-A02
Reliability Test:
(1)Test items and results
Test Item
Classification
Test Condition
Sample
Size
Operating Life Test
1.Ta=Under Room Temperature As Per Data Sheet
Maximum Rating.
2.If=20mA
3.t=1000 hrs
22
High Temperature
Storage Test
1.Ta=105 ℃± 5℃
2.t=500 hrs
22
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs
22
High Temperature
High Humidity
Storage Test
1.IR-Reflow In-Board, 2 Times
2.Ta=85℃± 5℃
3.RH=90 %~95%
4.t=500hrs±2hrs
22
Thermal Shock Test
1.IR-Reflow In-Board,2 times
2.Ta=105 ℃ ±5℃ &
-40℃± 5℃
(30min) (30min)
3.total 100 cycles
22
1.T.Sol=260 ℃±5℃
2.Dwell Time= 10Max.
22
1.105℃ ~ 25℃ ~ - 40℃
30mins 15mins 30mins
2.100 Cyeles
22
Endurance
Test
Environmental
Test
Reflow Soldering Test
Temperature
Cycling
(2)Criteria for judging the damage
Item
Symbol Test Conditions
Criteria for Judgement
Min.
Max.
Forward Voltage
Vf
If=20mA
-
U.S.L x1.2
Reverse Current
Ir
Vr=5V
-
U.S.L x2.0
Luminous Intensity
Iv
If=20mA
L.S.L x 0.5
-
Note:
1.U.S.L.:Upper Standard Level.
2.L.S.L.:Lower Standard Level.
Similar pages