PAIRUI IS-30 Ac-dc din rail mounted power supply Datasheet

2016-V1.0-0831
Specifications
AC-DC Din Rail Mounted Power Supply
IS-30 Series, 30W
PAIRUI ELECTRONICS
No. 545 Museum Road
Yangzhou, Jiangsu
China 225009
Tel: 86 (514) 8279 1592
Fax: 86 (514) 8769 3159
2016
din rail power supply
PRODUCT SPECIFICATION
AC-DC Din Rail Mountable Power Supply
IS-30 SERIES, SINGLE PHASE INPUT
Features
3 Year Warranty
Universal Input 90~264Vac
100% Full Load Burn-in Test
Cooling by Free Air Convection
All Round Protections: Short Circuit, Over Voltage,
Over Current, Over Temperature
LED Indicator for DC Power On
LED Indicator for DC Low
Applications
Electrical
IS 30 - 24
Output Voltage(VDC)
Output Power(W)
Series Name
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:1/17
din rail power supply
PRODUCT SPECIFICATION
Electrical
Part Number
Nominal
Input Voltage
Output
Voltage
Output
Current
Ripple
(Typ.)
Efficiency
(Typ.)
Certificate
IS30-5
100 - 240VAC
5V
5A
32mV
78%
CE, FCC, CB, UL, CUL
IS30-12
100 - 240VAC
12V
2.5A
42mV
83%
CE, FCC, CB, UL, CUL
IS30-24
100-240VAC
24V
1.3A
46mV
87%
CE, FCC, CB, UL, CUL
NOTE:
1. The ripple values are measured at 20MHz of bandwidth by using a 12'' twisted pair-wire terminated with 0.1uF & 47uF parallel capacitor under ambient temperature 25℃ at rated input voltage and
rated load;
2. The efficiency values are measured under ambient temperature 25℃ at rated input voltage and rated load.
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:2/17
din rail power supply
PRODUCT SPECIFICATION
INPUT
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
Input voltage
90
264
Vac
Input frequency
47
63
Hz
Input current
Full load, Vin=115Vac
Full load, Vin=230Vac
30
60
Cold start, Vin=115Vac
Cold start, Vin=230Vac
Inrush current
A
A
0.65
0.35
A
A
1. This product is built in inrush limiting circuit to protect the circuit
from surge current damages when the power is turned on. Malfunction
can occur by repeating the input voltage on and off rapidly. Therefore,
sufficient interval should be given between turning on and off the
power;
2. To avoid connecting the switch or fuse to input terminal(outside of
the power supply), more consideration should be given when selecting
the parts that can endure the inrush current
Stand-by power consumption
Vin=230Vac
1
W
Surge voltage
L-N
2
KV
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:3/17
din rail power supply
PRODUCT SPECIFICATION
OUTPUT
PARAMETER
CONDITIONS
MIN
Output voltage accuracy
IS30-5
IS30-12
IS30-24
Output voltage adjustment
range
TYP
MAX
UNITS
±1
%
4.5-5.3
11.6-12.3
23.5-24.5
V
V
V
Output voltage can be adjusted within above range by V-ADJ. variable
resistance inside of the power supply. When output voltage exceeds
the range, the power supply will be in failure or get into over voltage
protection mode. To avoid the case that the output voltage is higher
than rated voltage, output current should be used under rated current
Minimum load
A
0
Line regulation
Vin from 100Vac to 240Vac
1
%
Load regulation
Vout from min. to max.
1
%
Turn-on delay time
Full load, Vin=115Vac
100
ms
Hold up time
Full load, Vin=115Vac
20
ms
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:4/17
PRODUCT SPECIFICATION
din rail power supply
Protection
Short circuit
Hiccup mode, it will recover automatically after fault condition is removed
IS30-5: over voltage protection value 6.5V
IS30-12: over voltage protection value 16V
IS30-24: over voltage protection value 30V
Over voltage
(1) When output voltage exceeds above over voltage protection value or reversal
voltage occurs, the protection will be started and the output voltage will be cut
off in order to protect the power supply;
(2) The power supply will recover after the power is turned on again
IS30-5: over current protection value 6A
IS30-12: over current protection value 4A
IS30-24: over current protection value 2.2A
Over current
(1) When output voltage exceeds above over current protection value, the
protection will be started and the output voltage will be cut off in order to
protect the power supply;
(2) The power supply will recover automatically after the fault condition is
removed
Over temperature protection value: 100±10℃
Over
temperature
(1) When the ambient temperature exceeds above over temperature protection
value, the protection will be started and the output voltage will be cut off in
order to protect the power supply;
(2) The power supply will recover after the power is turned on again
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:5/17
din rail power supply
PRODUCT SPECIFICATION
Environment
PARAMETER
CONDITIONS
MIN
Ambient operating
temperature
Startup at rated voltage
Operating relative humidity
TYP
MAX
UNITS
-25
+70
℃
Non condensing
20
95
%
Storagetemperature
Humidity 5 ~ 95% RH
- 40
+ 85
℃
MTBF
Fullload, 220Vac input, 25℃ambient
temperature
200
DC-OK led
LED(Green)
DC OK LED light will be ON when the power supply is properly
operated
DC-Low led
LED(Red)
DC Low LED light will be ON:
(1) when output voltage is below 85%(±2.5%) from the rated output
voltage;
(2) when get over voltage, over current, over temperature and short
circuit fault
Cooling
Free air convection
Mounting method
Vertical
Dimension(W x H x D)
36.0 x 95.0 x 108.0mm
(1.42 x 3.74 x 4.25inch)
Weight
250g
Packing
22pcs/7.5kg/0.7cuft/carton
Carton size 620 x 260 x 175mm(LxWxH)
Khrs
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:6/17
PRODUCT SPECIFICATION
din rail power supply
Safety/EMC
Isolation voltage
I/P-O/P:3KVac, I/P-FG: 1.5KVac, O/P-FG: 1.5KVac
Insulation
resistance
100mΩ Max./500VDC
Safety
Design refer to UL60950-1, EN60950-1
EMC
EN 55022:2010+AC:2011 (CISPR 22:2008) ClassB
EN 61000-3-2:2014 (IEC 61000-3-2:2014)
EN 61000-3-3:2013 (IEC 61000-3-3:2013)
EN 55024:2010 (CISPR 24:2010)
NOTE: Unless otherwise specified, all the above parameters are measured at ambient temperature of
25℃andVin=100Vac to 240Vac.
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:7/17
din rail power supply
PRODUCT SPECIFICATION
Mechanical
5
108±1.0
36±1.0
5 5.2 5
95±1.0
80±0.5
11.6
SN code
7.5
95.3
52
LABEL
PRINTING
NAME PLATE
30
7 8
LED (DC OK)
LED (DC LOW)
35
DIN Rail
(Width: 35mm)
30
Output Voltage
Adjustment
7.5
12.7
Unit: mm
Tolerance: ±1.0
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:8/17
din rail power supply
PRODUCT SPECIFICATION
Mechanical
1
3
2
4
Marking
No.
Assignment
1
DC(+) Output Terminal
2
V-ADJ.
3
DC OK
DC(-) Output Terminal
DC LOW
LN
5
6
7
4
L
5
AC(L) Input Terminal
N
6
AC(N) Input Terminal
7
AC Grounding Terminal
V-ADJ.
/
DC Output voltage adjustment trimmer
DC OK
/
DC Output OK indication LED(Green)
DC LOW
/
DC Output Low indication LED(Red)
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:9/17
din rail power supply
PRODUCT SPECIFICATION
100
100
90
90
80
80
Load(%)
Load(%)
Electrical Curve
70
60
50
60
50
40
40
230Vac Input
110Vac Input
30
-10
70
0
10
20
30
40 50 60 70
30
90
110 130 150 170 190 210 230 264
Input voltage(Vac)
Temperature(℃)
Block Diagram
+V
L
Line
Filter
N
Rectifier
Circuit
Inrush
Current
Limit
+V
Switching
Device
Rectifier
Circuit
Current
Detect
-V
-V
FG
PWM
Control
Circuit
Error
AMP
OVP
Detect
Output
Detect
DC OK(Green)
DC Low(Red)
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:10/17
din rail power supply
PRODUCT SPECIFICATION
Package
Inner Box
L 150 x W 130 x H 42mm
Outer Carton
L 620 x W 260 x H 185mm
SERIES
QTY/BOX
QTY/CARTON
NET WEIGHT
GROSS WEIGHT
VOLUME
IS-30
1 piece
22 boxes
5.5kg/carton
7.5kg/carton
0.7cuft/carton
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:11/17
din rail power supply
PRODUCT SPECIFICATION
Application Note
1. Series Operation
LOAD
LN
LN
Series Operation A
LOAD
LN
LOAD
LN
Series Operation B
Note:
1. Series operation can be connected as shown in above;
2. Load current should be less than the current value of the product with the lowest output
current specified at the product specification with the power supply at series connection.
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:12/17
din rail power supply
PRODUCT SPECIFICATION
Application Note
2. Parallel Operation
LOAD
LOAD
LN
LN
LN
Parallel Operation A
(Unable to use)
LN
Parallel Operation B
(Unable to use)
LOAD
LN
LN
Parallel Operation C
(Backup)
Note:
1. Parallel operation should be composed with the same products, while the connection should be as shown as “Parallel operation C”;
2. In parallel operation C, current capacity cannot be increased, while it should be used for
backup only. Moreover, diode that is to be added during parallel operation should be selected
after considering it’s voltage drop, output voltage and current capacity.
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:13/17
PRODUCT SPECIFICATION
din rail power supply
Application Note
3. Mounting Method
(1) How to fix
Firstly hang A part on the top of Rail as shown in below, then push the power supply into B direction to fix it.
(2) How to remove
Remove the power supply to D direction, pulling C part by using tools, such as a screwdriver,
to downward direction.
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:14/17
din rail power supply
PRODUCT SPECIFICATION
Application Note
3. Mounting Method
(3) Mounting Spacing
Mounting method should be considered with airflow. Leave enough space between the units
when several units are mounted together. Forced air cooling makes protection against heat
better.
LN
LN
25mm
AIR
25mm
25mm
or more
AIR
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:15/17
PRODUCT SPECIFICATION
din rail power supply
Application Note
4. Cautions
(1) Please confirm if the capacity of the product is suitable for your intended application before putting it in use;
(2) Only the rated input voltage specified on the product should be used;
(3) Only the wires with rated capacity should be connected to this product, as allowable voltage and current is varied according to each type of wire;
(4) Ground terminal of the power supply must be grounded before use to prevent electric shock or electromaganetic interference;
(5) Be cautions to keep the product clean as foreign matter near the input & output terminal
or inside if the product could cause series damages;
(6) If a fuse installed in the product blows off, the product should experience damages not
only to the fuse but also to other parts as well. Therefore, the product is to be required for
maintenance work from customer service department as well as replacement of the fuse;
(7) Due to constant leakage current flows within the product, extra caution should be made
if multiple number of products are used connecting to each other as total leakage current could be amounted beyond the capacity;
(8) Be sure to avoid any physical contact with the product since some of the parts inside of
the product are being functioned at high voltage, which could cause serious electric shock;
(9) For the purpose of safety as well as reliability of the product, please avoid using the product at the following sites:
- A place near water or fire
- A place with high room temperature and poor ventilation
- A place with a presence of foreign subject or dust
- A place near volatile or flammable compounds
- A place with high humidity
- A place vulnerable for vibration or shock
(10) Do not inspect or repair the product while the power is applied;
(11) Unauthorized modification should be avoided in order to prevent series injury or physical loss due to any malfunction;
(12) In case of power outage while in operation, be sure to turn off the power supply.
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:16/17
PRODUCT SPECIFICATION
din rail power supply
Application Note
5. Warranty
(1) Repair service will be provided for free upon any mechanical, technical or functional defects during the guaranteed warranty, however, any defects or malfunction due to international infliction or negligence by customers will be repaired at the customer’s expense;
(2) Guaranteed warranty of the product runs for 3 years, while appearance and specification
of the product is subject for change without any prior notification for the purpose of quality
improvement of the product.
PAIRUI ELECTRONICS
www.pairuigroup.com
Updated 2016-V1.0-0830
Page:17/17
din rail power supply
PRODUCT SPECIFICATION
Update Record
Date
Version
Updated Content
2016/08/30
2016-V1.0-0830
File created
Updated By
Approved By
Similar pages