NKK D22045LP General specification Datasheet

A
Electrical Capacity (Resistive Load)
Logic Level:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Contact Timing:
Angle of Throw:
Materials & Finishes
Toggle/Lever:
Bushing:
Support Bracket:
Housing:
Base:
Movable Contacts:
Stationary Contacts:
Terminals:
Slides
Indicators
Touch
Tilt
Tactiles
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
PCB Processing
Soldering:
Cleaning:
Standards & Certifications
Flammability Standards:
0.4VA maximum @ 48V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 48V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum for bat lever models
50,000 operations minimum for locking lever models
50,000 operations minimum
Nonshorting (break-before-make)
24°
Brass with chrome plating
Brass with nickel plating
Straight PC: phosphor bronze with tin plating; right angle & vertical: brass with tin plating
Polybutylene terephthalate (PBT) (UL94V-0)
1- and 2-pole GFR polyamide (UL94V-0); 4-pole liquid crystal polymer (LCP) (UL94V-0)
Phosphor bronze with gold plating
Brass with gold plating
Brass with gold plating
–10°C through +70°C (+14°F through +158°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Wave Soldering recommended. See Profile A in Supplement section.
Manual Soldering: 1- & 2-pole: 3 seconds maximum @ 350°C maximum;
4-pole: 4 seconds maximum @ 410°C maximum
Hand clean locally using alcohol based solution.
See Cleaning specifications in Supplement section.
UL94V-0 rated housing & base
The D2 Series toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-current, logic level circuit.
When used as intended in a logic level circuit, the results do not produce hazardous energy.
Supplement
Accessories
PCB Mount Miniature Toggles
General Specifications
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series D2
A24
www.nkkswitches.com
A
Rockers
Distinctive Characteristics
Toggles
Series D2
PCB Mount Miniature Toggles
Pushbuttons
Base of heat resistant resin meets UL94V-0 flammability rating.
Programmable Illuminated PB
Maximized voltage capability of 48V allows use in medium source
applications and increases operating life.
Keylocks
Award-winning STC contact mechanism with benefits unavailable
in conventional mechanisms: smoother positive detent actuation,
increased contact stability, and unparalleled reliability.
(Additional STC details under Terms and Acronyms in
the Supplement section.)
Rotaries
Round .031” (0.8mm) diameter PC terminals for easy
PCB assembly.
Slides
Terminal spacing conforms to standard .100” (2.54mm)
PC board grid spacing.
Touch
Tilt
Tactiles
Molded-in terminals prevent entry of flux, solvents, and
other contaminants.
Supplement
Accessories
Indicators
Actual Size
www.nkkswitches.com
A25
PCB Mount Miniature Toggles
A
TYPICAL SWITCH ORDERING EXAMPLE
Rockers
Toggles
Series D2
Programmable Illuminated PB
Pushbuttons
D220
1
2
Poles
1
SPDT
2
DPDT
*4
4PDT
Actuators
No
Code
L
Keylocks
* Combines with
ON-NONE-ON circuit
only & not available
with Right Angle
Rotaries
P
.413” (10.5mm)
Bat Lever
.200” (5.1mm) Diameter
Locking Lever
Slides
Circuits
PC Terminals
2
ON
NONE
ON
P
3
ON
OFF
ON
*B
Straight with Bracket
5
ON
NONE
(ON)
*H
Right Angle with Bracket
8
(ON)
OFF
(ON)
*V
Vertical with Bracket
9
ON
OFF
(ON)
*Bracketed models combine
with smooth bushings
Tilt
Tactiles
( ) = Momentary
Straight
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Touch
D22012P
Indicators
.413” (10.5mm)
Bat Lever
Accessories
SPDT
ON-NONE-ON Circuit
Supplement
Straight PC Terminals
A26
www.nkkswitches.com
A
POLES & CIRCUITS
Up
Down
Center
Up
Keyway
Note:
Pole
Model
SP
D22012
D22013
D22015
D22018
D22019
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3
OPEN
2-1
SPDT
DP
D22022
D22023
D22025
D22028
D22029
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
2-3 5-6
OPEN
2-1 5-4
DPDT
4P
D22042
ON
NONE
ON
2-3 5-6
8-9 11-12
OPEN
2-1 5-4
8-7 11-10
4PDT
Rockers
Center
Keyway
Throw & Schematics
Terminal numbers are not
actually on the switch.
Pushbuttons
Down
Connected Terminals
2 (COM)
3
1
2
(COM)
3
1
1
11
8
9
4
6
4
7
12
10
Keylocks
3
6
(COM)
5
2
5
ACTUATORS
L
Bat Lever
.413” (5.1mm) Diameter
Locking Lever
24°
(5.1) Dia
.201
Rotaries
No Code .413” (10.5mm)
24°
(10.5)
.413
(8.0)
.315
(19.4)
.764
Material:
Chrome over brass
(4.6) Dia
.181
(17.9)
.705
Slides
(2.8) Dia
.110
Material:
Chrome over brass
M6 P0.75
(7.0) (6.1)
.275 .240
B
Straight with
Bracket
H
Right Angle
with Bracket
V
Vertical
with Bracket
Touch
Tilt
Straight
Tactiles
PC TERMINALS
P
Programmable Illuminated PB
Toggle Position
( ) = Momentary
Toggles
Series D2
PCB Mount Miniature Toggles
24°
Material:
Polyethylene
(5.0) Dia
.197
Colors Available:
ABCEFG
(13.5)
.532
AT427 Cap Supplied
with Locking Lever
24°
(4.8) Dia
.189
(12.0)
.472
Colors Codes:
Colors Available:
ABCEFG
A Black
B White
(13.1)
.516
C Red
(11.5)
.452
Material:
Anodized
Aluminum
www.nkkswitches.com
F Green
(8.0)
.315
(19.4)
.764
Colors Available:
ACG
E Yellow
24°
(5.1) Dia
.201
(17.9)
.705
(4.6) Dia
.181
Accessories
Material:
Polyethylene
AT444 Bat Lever
Conical Cap
Supplement
AT415
Bat Lever Cap
Indicators
OPTIONAL CAPS & CAP COLORS
G Blue
A27
Toggles
Series D2
PCB Mount Miniature Toggles
A
TYPICAL SWITCH DIMENSIONS
Rockers
Straight PC • Single Pole
Keyway
(0.3)
.012
M6 P0.75
3
Keylocks
Programmable Illuminated PB
Pushbuttons
24°
(7.2)
.283
(10.5)
.413
Keyway
(3.6)
.142
(13.9)
.547
(0.3)
.012
(7.0)
.276
M6 P0.75
3
(5.08) Typ
.200
(5.1) Dia
.201
D22012P
(6.1)
.240
(1.0) Dia Typ
.039
(3.6)
.142
(13.9)
.547
Actuator in Down Position
Keyway
(0.3)
.012
M6 P0.75
Rotaries
(5.08) Typ
.200
(2.8) Dia
.110
Slides
1
(0.8) Dia Typ
.031
(17.9)
.705
(19.4)
.764
D22012LP
Straight PC • Double Pole
(5.08) Typ
.200
2
24°
(0.8) Dia Typ
.031
(7.2)
.283
(10.5)
.413
Keyway
Tactiles
6
3
5
2
4
1
(14.4)
.567
(0.3)
.012
(5.08)
.200
(12.4)
.488
(3.6)
.142
(13.9)
.547
(5.08)
.200
M6 P0.75
24°
Tilt
1
(0.8) Dia Typ
.031
(2.8) Dia
.110
24°
(5.08) Typ
.200
3
6
2
5
1
4
(5.08) Typ
.200
(1.0) Dia Typ
.039
(5.1) Dia
.201
D22022P
D22022LP
(17.9)
.705
(19.4)
.764
(0.8) Dia Typ
.031
(6.1)
.240
(13.9)
.547
Keyway
(0.3)
.012
M6 P0.75
24°
(5.08) Typ
.200
Indicators
(2.8) Dia
.110
(0.8) Dia Typ
.031
(7.2)
.283
(10.5)
.413
Keyway
Accessories
(3.6)
.142
Actuator in Down Position
Touch
Straight PC • Four Pole
Supplement
(14.4)
.567
2
(5.08) Typ
.200
(13.9)
.547
12
9
6
3
11
8
5
2
10
7
4
1
(5.08) Typ
.200
(14.4)
.567
(2.54)Typ
.100
(0.3)
.012
(22.6)
.890
(3.6)
.142
(5.08) Typ
.200
M6 P0.75
24°
(5.08) Typ
.200
3
6
9
12
2
5
8
11
1
4
7
10
(5.08) Typ
.200
(1.0) Dia Typ
.039
(5.1) Dia
.201
D22042P
A28
D22042LP
(17.9)
.705
(19.4)
.764
(0.8) Dia Typ
.031
(6.1)
.240
(13.9)
.547
Actuator in Down Position
www.nkkswitches.com
(3.6)
.142
(2.8) Dia
.110
(2.54) Typ
.100
(0.4) Typ
.016
(6.2) Dia
.244
3
(15.24)
.600
(5.08) Typ
.200
24°
(1.0) Dia Typ
.039
(0.8) Dia Typ
.031
(3.6)
.142
(14.3)
.563
D22012B
Actuator in Down Position
(17.9)
.705
(19.4)
.764
4
1
(0.3)
.012
3
6
2
5
1
4
(14.3)
.563
(5.08) Typ
.200
(7.62) Typ
.300
(1.0) Dia Typ
.039
(0.8) Dia Typ
.031
(5.7)
.224
(14.4)
.567
(16.44)
.647
(2.54) Typ
.100
(15.24)
.600
(5.08) Typ
.200
(5.1) Dia
.201
2
(0.4) Typ
.016
24°
(7.0)
.276
5
(3.6)
.142
D22022B
Actuator in Down Position
(6.2) Dia
(0.4) Typ
Keyway
.244
.016
(15.24)
.600
(5.08) Typ
.200
24°
(2.8) Dia
.110
(0.8) Dia Typ
.031
(10.5)
.413
(7.0)
.276
(6.8)
.268
(14.3)
.563
(7.0)
.276
3
11
8
5
2
10
7
4
1
(14.3)
.563
(16.44)
.647
(0.3)
.012
(2.54) Typ
.100
(5.08) Typ
.200
3
6
9
12
2
5
8
11
1
4
7
10
(0.8) Dia Typ
.031
(5.7)
.224
(14.4)
.567
(2.54)Typ
.100
(0.4) Typ
.016
(15.24)
.600
(5.08) Typ
.200
(17.9)
.705
(19.4)
.764
6
(22.6)
.890
24°
(5.1) Dia
.201
9
(5.08) Typ
.200
Straight PC • Bracket
Four Pole
(0.3)
.012
12
(3.6)
.142
(6.2) Dia
.244
Keyway
(5.08)
.200
(0.7) Typ
.028
D22022LB
(3.6)
.142
(5.08) Typ
.200
(7.62) Typ
.300
(1.0) Dia Typ
.039
D22042B
Actuator in Down Position
www.nkkswitches.com
Tilt
Keyway
(3.6)
.142
(14.3)
.563
3
(5.08)
.200
(12.4)
.488
(0.8) Dia Typ
.031
(6.8)
(10.5)
.268
.413
(6.2) Dia
.244
6
Tactiles
(2.8) Dia
.110
Straight PC • Bracket
Double Pole
(0.3)
.012
Rotaries
(15.24)
.600
(5.08) Typ
.200
24°
(7.0)
.276
(5.08)
.200
(0.7) Typ
.028
Slides
(6.2) Dia
(0.4) Typ
Keyway
.244
.016
D22012LB
Touch
(5.7)
.224
Indicators
(17.9)
.705
(19.4)
.764
(7.62) Typ
.300
1
Accessories
(5.1) Dia
.201
(5.08) Typ
.200
2
D22042LB
A29
Supplement
Keyway
(0.3)
.012
(7.0)
.276
(3.6)
.142
(14.3)
.563
(16.44)
.647
1
(0.8) Dia Typ
.031
(6.8)
.268
(10.5)
.413
(14.4)
.567
2
Pushbuttons
24°
Programmable Illuminated PB
3
(15.24)
.600
(5.08) Typ
.200
Straight PC • Bracket Single Pole
(0.7) Typ
.028
Keylocks
(5.08)
.200
(0.4) Typ
(6.2) Dia
Keyway
.016
.244
Rockers
A
TYPICAL SWITCH DIMENSIONS
Toggles
Series D2
PCB Mount Miniature Toggles
Toggles
Series D2
PCB Mount Miniature Toggles
A
TYPICAL SWITCH DIMENSIONS
Rockers
Right Angle PC • Single Pole
(6.2) Dia
.244
Keyway
Pushbuttons
(0.3)
.012
(2.8) Dia
.110
(3.5)
.138
(0.4)
.016
(0.9)
.035
(15.24)
.600
(0.7) Typ
.028
(10.5)
.413
Programmable Illuminated PB
(5.08)
.200
(7.7)
.303
(3.5)
.138
(0.8) Dia
.031
2
(7.0)
.276
3
(0.3)
.012
(0.3)
.012
(5.08) Typ
.200
(14.4)
.567
D22012H
(6.2) Dia
.244
Keyway
(5.08) Typ
.200
3
(0.3)
.012
2
1
(15.24)
.600
Keylocks
(5.1) Dia
.201
(3.5)
.138
(0.7) Typ
.028
(6.6)
.260
(5.08)
.200
Rotaries
Slides
1
D22012LH
(0.4)
.016
(0.9)
.035
(15.24)
.600
(3.5)
.138
(0.8) Dia
.031
(1.0) Dia Typ
.039
(2.54) Typ
.100
Actuator in Down Position
Right Angle PC • Double Pole
(6.2) Dia
.244
Tactiles
Keyway
(0.3)
.012
4
5
6
1
2
3
(12.4)
.488
(2.8) Dia
.110
(3.5)
.138
Tilt
(0.7) Typ
.028
(5.08)
.200
(10.5)
.413
(7.7)
.303
(0.4)
.016
(0.9)
.035
(15.24)
.600
(0.5) (3.5)
.020 .138
(0.8) Dia Typ
.031
(2.54)
.100
(0.3)
.012
(0.3)
.012
(5.08) Typ
.200
(14.4)
.567
Touch
D22022H
(6.2) Dia
.244
Indicators
Keyway
Accessories
(0.3)
.012
(5.1) Dia
.201
(0.7) Typ
.028
Supplement
(5.08)
.200
A30
5
4
3
2
1
(15.24)
.600
(3.5)
.138
D22022LH
6
(5.08) Typ
.200
(2.54)
.100
(6.6)
.260
(0.4)
.016
(0.9)
.035
(15.24)
.600
Actuator in Down Position
www.nkkswitches.com
(0.5) (3.5)
.020 .138
(0.8) Dia Typ
.031
(2.54)
.100
(2.54) Typ
.100
(1.0) Dia Typ
.039
A
TYPICAL SWITCH DIMENSIONS
Vertical PC • Single Pole
(0.3) Typ
.012
3
(5.08)
.200
(10.5)
.413
(7.7)
.303
(0.4)
.016
(0.9)
.035
(15.24)
.600
(0.5)
.020
(0.8) Dia Typ
.031
(2.54) Typ
.100
Pushbuttons
1
(1.0)
.039
(2.8) Dia
.110
(3.5)
.138
(0.7) Typ
.028
(14.4)
.567
2
(3.5)
.138
(0.3)
.012
Programmable Illuminated PB
24°
(0.3)
.012
(7.0)
.276
D22012V
(6.2) Dia
.244
3
(2.54) Typ
.100
2
(3.5)
.138
(1.0)
.039
(17.9)
.705
(19.4)
.764
(5.08)
.200
(6.6)
.260
(0.4)
.016
(0.9)
.035
(15.24)
.600
(15.24)
.600
(0.5)
.020
(0.8) Dia Typ
.031
(2.54) Typ
.100
Keylocks
(5.1) Dia
.201
(3.5)
.138
(0.7) Typ
.028
(2.54) Typ
.100
(1.0) Dia Typ
.039
D22012LV
Actuator in Down Position
Vertical PC • Double Pole
(6.2) Dia
.244
(0.3)
.012
24°
(0.3)
.012
(3.5)
.138
(1.0)
.039
(2.8) Dia
.110
(3.5)
.138
(0.7) Typ
.028
(10.5)
.413
(5.08)
.200
(7.7)
.303
(0.4)
.016
(0.9)
.035
(15.24)
.600
(0.5)
.020
(0.8) Dia Typ
.031
(2.54) Typ
.100
6
3
5
2
4
1
(14.4)
.567
(0.3)
.012
(5.08)
.200
(12.4)
.488
Tilt
Keyway
Tactiles
(0.3)
.012
1
Rotaries
24°
D22022V
Touch
Keyway
Slides
(6.2) Dia
.244
Keyway
Rockers
Toggles
Series D2
PCB Mount Miniature Toggles
(0.3)
.012
(3.5)
.138
(1.0)
.039
(5.1) Dia
.201
(3.5)
.138
(0.7) Typ
.028
(5.08)
.200
(17.9)
.705
(19.4)
.764
(6.6)
.260
(0.4)
.016
(0.9)
.035
(15.24)
.600
(0.5)
.020
(0.8) Dia Typ
.031
(2.54) Typ
.100
5
1
4
(2.54) Typ
.100
(15.24)
.600
Accessories
24°
6
2
(2.54) Typ
.100
(1.0) Dia Typ
.039
Supplement
3
Indicators
(6.2) Dia
.244
Keyway
D22022LV
Actuator in Down Position
www.nkkswitches.com
A31
Toggles
Series D2
PCB Mount Miniature Toggles
A
TYPICAL SWITCH DIMENSIONS
Vertical PC • Four Pole
24°
Rockers
Pushbuttons
(0.3)
.012
(3.5)
.138
(1.0)
.039
(2.8) Dia
.110
(3.5)
.138
Programmable Illuminated PB
(0.7) Typ
.028
(5.08)
.200
(7.7)
.303
(10.5)
.413
12
9
6
3
11
8
5
2
10
7
4
1
(0.3)
.012
(0.5)
.020
(5.08) Typ
(0.8) Dia Typ
.200
.031
(2.54) Typ
.100
(0.4)
.016
(0.9)
.035
(15.24)
.600
(14.4)
.567
(2.54)Typ
.100
(22.6)
.890
D22042V
(6.2) Dia
.244
Keyway
3
24°
Keylocks
(0.3)
.012
(3.5)
.138
(17.9)
.705
(19.4)
.764
(5.08)
.200
Rotaries
(3.5)
.138
(1.0)
.039
(5.1) Dia
.201
(0.7) Typ
.028
D22042LV
(6.6)
.260
6
9
(5.08) Typ
.200
(2.54) Typ
.100
12
2
5
8
11
1
4
7
10
(15.24)
.600
(0.5)
.020
(0.8) Dia Typ
.031
(2.54) Typ
.100
(0.4)
.016
(0.9)
.035
(15.24)
.600
(2.54) Typ
.100
(1.0) Dia Typ
.039
Actuator in Down Position
STANDARD HARDWARE
AT513M
Hex Nut
Brass with nickel plating
2 supplied
Tactiles
Slides
(0.3)
.012
(6.2) Dia
.244
Keyway
AT507M
Locking Ring
Steel with zinc/chromate
1 supplied
OPTIONAL
AT509
Lockwasher
Steel with zinc/chromate
1 supplied
AT501M
Knurled Face Nut
Brass with chrome plating
(6.0) Dia
.236
M6 P0.75
(8.0)
.315
(12.0) Dia
.472
(2.0)
.079
Tilt
M6 P0.75
(6.4) Dia (10.2) Dia
.252
.402
(10.0) Dia
.394
(0.5)
.020
(1.7)
.067
(5.5)
.217
Touch
(9.0)
.354
(1.5)
.059
(1.7)
.067
(0.8)
.031
Supplement
Accessories
Indicators
PANEL CUTOUTS & MAXIMUM PANEL THICKNESS
With Standard
Hardware
.087” (2.2mm) for
Standard Lever
.051” (1.3mm) for
Locking Lever
A32
(6.5) Dia
.256
(2.2) Dia
.087
(6.5)
.256
Without
Bottom Hex Nut
Without
Locking Ring
.154” (3.9mm) for
Standard Lever
.118” (3.0mm) for
Standard Lever
.110” (2.8mm) for
Locking Lever
.083” (2.1mm) for
Locking Lever
www.nkkswitches.com
Without Locking Ring
& Bottom Hex Nut
(5.6)
.220
(6.5) Dia
.256
(0.6)
.024
.185” (4.7mm) for
Standard Lever
.142” (3.6mm) for
Locking Lever
Notes
www.nkkswitches.com
A33
Similar pages