Online data sheet GRSE18-P1122 GR18 PHOTOELECTRIC SENSORS GRSE18-P1122 | GR18 PHOTOELECTRIC SENSORS A B C D E F Ordering information Type Part no. GRSE18-P1122 1068333 Other models and accessories www.sick.com/GR18 Illustration may differ Detailed technical data Features H I J K L M N O P Q R S T Sensor/ detection principle Through-beam photoelectric sensor Housing design (light emission) Cylindrical, straight Thread diameter (housing) M18 x 1 Optical axis Axial Sensing range max. 0 m ... 15 m Sensing range 0 m ... 10 m Type of light Infrared light Light source LED 1) Light spot size (distance) Ø 420 mm (10 m) Wave length 850 nm Adjustment PotentiometerPotentiometer 1) Average service life: 100,000 h at TU = +25 °C. Communication interface Communication interface - Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ± 5 Vpp 2) 1) 2) 3) 4) 5) 6) 7) 8) 9) Limit values when operated in short-circuit protected network: max. 8 A. May not exceed or fall below Uv tolerances. At Uv > 24 V or ambient temperature > 49 °C, IA max. = 50 mA. Signal transit time with resistive load. With light/dark ratio 1:1. Do not bend below 0 °C. A = VS connections reverse-polarity protected. B = inputs and output reverse-polarity protected. D = outputs overcurrent and short-circuit protected. 10) 2 At Uv <=24V and IA<50mA. PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-09 17:58:45 Subject to change without notice GRSE18-P1122 | GR18 PHOTOELECTRIC SENSORS Power consumption ≤ 30 mA Output type PNP Output function Complementary Switching mode Light/dark switching Signal voltage PNP HIGH/LOW VS - (≤ 3 V) / approx. 0 V Output current Imax. 100 mA 3) Response time < 500 µs 4) Switching frequency 1,000 Hz 5) Connection type Cable, 4-wire, 2 m 6) Cable material PVC Circuit protection A 7) B 8) D 9) Protection class III Housing material Metal, Nickel-plated brass and ABS Optics material Plastic, PMMA Enclosure rating IP67 Items supplied Fastening nuts (4 x) EMC EN 60947-5-2 Test input Sender OFF at "Test" 0 V Ambient operating temperature –25 °C ... +55 °C 10) Ambient storage temperature –40 °C ... +70 °C UL File No. E348498 Part number of individual components 2074064 GRS18-D1321 2074071 GRE18-P1112 1) 2) 3) 4) 5) 6) 7) 8) 9) Limit values when operated in short-circuit protected network: max. 8 A. May not exceed or fall below Uv tolerances. At Uv > 24 V or ambient temperature > 49 °C, IA max. = 50 mA. Signal transit time with resistive load. With light/dark ratio 1:1. Do not bend below 0 °C. A = VS connections reverse-polarity protected. B = inputs and output reverse-polarity protected. D = outputs overcurrent and short-circuit protected. 10) At Uv <=24V and IA<50mA. Classifications ECl@ss 5.0 27270901 ECl@ss 5.1.4 27270901 ECl@ss 6.0 27270901 ECl@ss 6.2 27270901 ECl@ss 7.0 27270901 ECl@ss 8.0 27270901 ECl@ss 8.1 27270901 ECl@ss 9.0 27270901 2017-11-09 17:58:45 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3 GRSE18-P1122 | GR18 PHOTOELECTRIC SENSORS A B C D E F H I J K L M N O P Q R S T ETIM 5.0 EC002716 ETIM 6.0 EC002716 UNSPSC 16.0901 39121528 Adjustments possible GRL18(S), GRSE18(S), Sensitivity setting: Potentiometer, 270° Sensitivity – + + – Connection diagram Cd-088 2 1 BN BU BK WH + (L+) - (M) Test not connected BN BK WH BU + (L+) Q Q - (M) ① Sender ② Receiver 4 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-09 17:58:45 Subject to change without notice GRSE18-P1122 | GR18 PHOTOELECTRIC SENSORS Characteristic curve GRSE18S Operating reserve 1000 100 10 1 m 4 8 12 16 (feet) (13.12) (26.25) (39.37) (52.49) Distance in m (feet) Light spot size GRSE18, infrared light Diameter in mm (inch) Ø 14 Ø 300 Ø 630 (0.6) (11.8) Ø 215 (24.8) Ø 420 (16.5) Sensor (8.5) 0.1 (0.3) 5 7 10 15 (16.4) (23) (32.8) (49.2) Distance in m (feet) Sensing range diagram GRSE18S 0 0 10 15 4 8 12 16 (13.12) (26.25) (39.37) (52.49) Distance in m (feet) Operating range Sensing range typ. max. 2017-11-09 17:58:45 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5 GRSE18-P1122 | GR18 PHOTOELECTRIC SENSORS Dimensional drawing (Dimensions in mm (inch)) GRTE18, GRL18, GRSE18, metal, cable, straight M18 x 1 2.2 ① ② ③ ④ ⑤ ⑥ 71.5 (2.81) 52.9 (2.08) 54.6 (2.15) 4 (0.16) 6 9.5 3 (0.37) 5 4 1 2.8 (0.11) H I J K L M N O P Q R S T 2 (0.09) A B C D E F Connection cable 2 m Threaded mounting hole M18 x 1 LED indicator yellow LED indicator green Sensitivity control: potentiometer 270° Fastening nuts (2x); width across 24, metal Recommended accessories Other models and accessories www.sick.com/GR18 Brief description Type Part no. BEF-KHS-N06 2051612 Mounting plate for M18 sensors, steel, zinc coated, without mounting hardware BEF-WG-M18 5321870 Mounting bracket for M18 sensors, steel, zinc coated, without mounting hardware BEF-WN-M18 5308446 BEF-WN-M18-ST02 5312973 Universal bar clamp systems Plate N06 for universal clamp bracket, M18, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware Mounting brackets and plates Terminal and alignment brackets Mounting bracket with ball-and-socket, Plastic, mounting hardware included 6 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-11-09 17:58:45 Subject to change without notice GRSE18-P1122 | GR18 PHOTOELECTRIC SENSORS Brief description Type Part no. Clamping block for round sensors M18, without fixed stop, plastic (PA12), glass-fiber reinforced, mounting hardware included BEF-KH-M18 2051481 Clamping block for round sensors M18, with fixed stop, plastic (PA12), glass-fiber reinforced, mounting hardware included BEF-KHF-M18 2051482 Integrated adapter, Plastic (PA12) BEF-WN-MH15-1 4039533 Mounting ring, Stainless steel, without mounting hardware BEF-WN-MH15-2V 4053358 2017-11-09 17:58:45 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 7 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com