Renesas NX5522EH Laser diode 1 550 nm for ftth ingaasp mqw-fp laser diode Datasheet

Preliminary Data Sheet
NX5522 Series
LASER DIODE
1 550 nm FOR FTTH InGaAsP MQW-FP LASER DIODE
R08DS0029EJ0100
Rev.1.00
Oct 06, 2010
DESCRIPTION
The NX5522 Series is a 1 550 nm Multiple Quantum Well (MQW) structured
Fabry-Perot (FP) laser diode with InGaAs monitor PIN-PD. These devices are
designed and ideal for Fiber To The Home (FTTH).
APPLICATION
• 155 Mbps FTTH P2P (Fiber To The Home Point to Point) system
FEATURES
• Optical output power
Po = 5.0 mW
• Low threshold current
lth = 8 mA
• Differential efficiency
ηd = 0.3 W/A
• Wide operating temperature range
TC = −40 to +85°C
• InGaAs monitor PIN-PD
• CAN package
φ 5.6 mm
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
R08DS0029EJ0100 Rev.1.00
Oct 06, 2010
Page 1 of 6
NX5522 Series
Chapter Title
PACKAGE DIMENSIONS (UNIT: mm)
1.0±0.1
1
110°±2°
2
4
3
(0.4)*2
*1
Focal Point
Δx = ±300 μ m
Δy = ±300 μ m
PIN CONNECTIONS
(3.0)
*2
6.35±0.5
φ 2.0
NX5522EH
NX5522EK
1 (Case)
1 (Case)
15.0±1.0 1.2±0.1
3.87±0.3
BOTTOM VIEW
(0.4)*2
φ 5.6+0.00
–0.03
(φ 4.2)*2
(φ 3.55)*2
Reference
Plane
2
4
2
4– φ 0.45
LD
LD
4
PD
PD
3
3
φ 2.0
*1 Focal Point: A point to get maximum optical output power from fiber.
*2 ( ) indicates nominal dimension.
R08DS0029EJ0100 Rev.1.00
Oct 06, 2010
Page 2 of 6
NX5522 Series
Chapter Title
ORDERING INFORMATION
Part Number
NX5522EH
Package
Pin Connections
1
4-pin CAN with ball lens cap
LD
4
2
PD
3
1
NX5522EK
LD
2
4
PD
3
Remarks 1. The color of ball lens cap might be observed differently from our can package products.
2. The hermetic test will be performed as AQL 1.0%.
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
Optical Output Power
Po
10
mW
Forward Current of LD
IF
150
mA
Reverse Voltage of LD
VR
2.0
V
Forward Current of PD
IF
10
mA
Reverse Voltage of PD
VR
15
V
Operating Case Temperature
TC
−40 to +85
°C
Storage Temperature
Tstg
−40 to +85
°C
Lead Soldering Temperature
Tsld
350 (3 sec.)
°C
Relative Humidity (noncondensing)
RH
85
%
R08DS0029EJ0100 Rev.1.00
Oct 06, 2010
Page 3 of 6
NX5522 Series
Chapter Title
ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C, unless otherwise specified)
Parameter
Symbol
Operating Voltage
Vop
Threshold Current
Ith
Conditions
MIN.
TYP.
MAX.
Unit
1.1
1.5
V
8
20
mA
20
40
Po = 5.0 mW, TC = −40 to +85°C
TC = 85°C
Differential Efficiency
ηd
Center Wavelength
λC
0.2
Po = 5.0 mW, RMS (−20 dB),
0.3
1 480
W/A
1 580
nm
3.0
nm
TC = −40 to +85°C
Spectral Width
σ
Po = 5.0 mW, RMS (−20 dB),
TC = −40 to +85°C
Rise Time
tr
10-90%
0.7
ns
Fall Time
tf
90-10%
0.7
ns
Lateral Beam Angle
θ//
Po = 5.0 mW
11
deg.
Vertical Beam Angle
θ⊥
Po = 5.0 mW
11
deg.
Monitor Current
Im
VR = 5 V, Po = 5.0 mW
Monitor Dark Current
ID
VR = 5 V
1.5
100
0.1
VR = 5 V, TC = −40 to +85°C
Monitor PD Terminal Capacitance
Ct
γ
*1
Tracking Error
1 000
μA
10
nA
500
VR = 5 V, f = 1 MHz
6
Im = const. (@ Po = 5.0 mW, TC = 25°C),
−1.0
20
pF
1.0
dB
TC = −40 to +85°C
*1
Tracking Error: γ
Po
γ = 10 log
(mW)
Po
5.0
[dB]
TC = 25°C
5.0
TC = –40 to +85°C
Po
0
R08DS0029EJ0100 Rev.1.00
Oct 06, 2010
Im
Im
(mA)
Page 4 of 6
NX5522 Series
<R>
Chapter Title
REFERENCE
Document Name
Opto-Electronics Devices Pamphlet
*1
*1
Document No.
PX10160E
Published by the former NEC Electronics Corporation.
R08DS0029EJ0100 Rev.1.00
Oct 06, 2010
Page 5 of 6
NX5522 Series
Chapter Title
SAFETY INFORMATION ON THIS PRODUCT
DANGER
SEMICONDUCTOR LASER
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE TO BEAM
OUTPUT POWER
mW MAX
WAVELENGTH
nm
CLASS lllb LASER PRODUCT
Warning
Laser Beam
AVOID EXPOSURE-Invisible
Laser Radiation is emitted from
this aperture
A laser beam is emitted from this diode during operation.
The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of
eyesight.
• Do not look directly into the laser beam.
• Avoid exposure to the laser beam, any reflected or collimated beam.
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
R08DS0029EJ0100 Rev.1.00
Oct 06, 2010
Page 6 of 6
Revision History
Rev.
−
1.00
Date
Apr 2009
Oct 06, 2010
NX5522 Series Data Sheet
Description
Summary
Page
−
Throughout
p.5
Previous No. : PL10755EJ01V0DS
Preliminary Data Sheet -> Data Sheet
Modification of REFERENCE
All trademarks and registered trademarks are the property of their respective owners.
C-1
Notice
1.
All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas
Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to
be disclosed by Renesas Electronics such as that disclosed through our website.
2.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
3.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and
regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to
the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable domestic or foreign laws or regulations.
6.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
7.
Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas
Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the
use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.
The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard":
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically
designed for life support.
"Specific":
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical
implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
9.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1)
(Note 2)
"Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
"Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: +1-905-898-5441, Fax: +1-905-898-3220
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
7F, No. 363 Fu Shing North Road Taipei, Taiwan, R.O.C.
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: +65-6213-0200, Fax: +65-6278-8001
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2010 Renesas Electronics Corporation. All rights reserved.
Colophon 1.0
Similar pages