Microsemi GC4533-00 Control devices high voltage nip diodes tm Datasheet

GC4510 – GC4533
CONTROL DEVICES
High Voltage NIP Diodes
®
TM
RoHS Compliant
KEY FEATURES
The GC4500 series are high voltage, high power (anode base) NIP diodes.
These high resistivity silicon devices are passivated with silicon dioxide for
high stability and reliability and have been proven by thousands of device
hours in high reliability systems.
 Available as packaged devices or
as chips for hybrid applications
These devices can withstand storage temperatures from -65°C to +200°C
and will operate over the range from -55° to +150°C. All devices meet or
exceed military environmental specifications of MIL-PRF-19500.
 Suitable for applications to 18Ghz
The NIP diode is used when negative bias current is available for forward
conduction and will operate typically with -50 mA bias. Breakdown voltages
are available up to 500 volts. (Higher voltages available on request. Consult
factory for details.) These diodes have somewhat faster speeds as compared
with similar PIN diodes.
 Low Distortion
This series of diodes meets RoHS requirements per EU Directive
2002/95/EC. The standard terminal finish is gold unless otherwise specified.
Consult the factory if you have special requirements.
 High power handling
 Low Loss
1
 RoHS Compliant
www.MICROSEMI.com
DESCRIPTION
1 Products are supplied with a Gold finish and are
suitable for RoHS complaint assembly. Consult factory
for details.
APPLICATIONS
2B
The GC4500 series can be used in RF circuits as an on/off element, as a
switch or as a current controlled resistor in attenuators extending over the
frequency range from UHF through Ku band.
Switch applications include medium high power switches (ECM systems), TR
or
lobing
switches,
channel
or
antenna
selection
switches
(telecommunications), duplexers (radar) and digital phase shifters (phase
arrays).
APPLICATIONS/BENEFITS
 TR Switches
 Antenna Selector Switches
The GC4500 series are also used as active limiters for low to moderate RF
power levels. Attenuator type applications include amplitude modulators,
AGC attenuators, power levelers and level set attenuators.
 Duplexers
 Digital Phase Shifters
ABSOLUTE MAXIMUM RATINGS AT 25º C
(UNLESS OTHERWISE SPECIFIED)
3B
Rating
Value
Unit
IR
0.5
uA
Storage Temperature
TSTG
-65 to +200
ºC
Operating Temperature
TOP
-55 to +150
ºC
Maximum Leakage Current
@80% of Minimum Rated VB
GC4510-GC4533
Symbol
For the most current data, consult our website: www.MICROSEMI.com
HU
U
Specifications are subject to change, consult factory for further information.
These devices are ESD sensitive and must be handled using ESD precautions.
Copyright  2006
Rev.: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 1
GC4510 – GC4533
CONTROL DEVICES
High Voltage NIP Diodes
®
TM
RoHS Compliant
DEVICE ELECTRICAL PARAMETERS @ 25C (unless otherwise specified)E
VB(V)
CJ (pF) 1
@VR=50V
(Min)
(Max)
IR=10μA
@100 mA
TL(uS)
IR=6mA/IF=10mA
Thermal
Resistance
θ (˚C/W)
(Max)
(Typ)
(Max)
Rs(Ω) 2
GC4510 – 00
100
0.1
1.0
0.1
40
GC4511 – 00
100
0.25
0.6
0.2
25
GC4512 – 00
100
0.5
0.5
0.3
20
100
0.75
0.4
0.4
10
GC4513 – 00
3
GC4530 – 00
300
0.1
1.5
0.3
50
GC4531 – 00
300
0.25
1.2
0.5
30
GC4532 – 00
300
0.5
1.0
0.75
20
300
0.75
0.8
1.0
15
GC4533 - 00
3
www.MICROSEMI.com
Model Number
Notes:
1. Capacitance is measured at 1 MHz and -50 VOLTS
2. Resistance is measured using transmission loss techniques.
3. These devices are not available in all the package styles. Please consult the factory for specific case styles offered.
DEVICE NOTES
The tabulated specifications above are for package style 00. Diodes are also
available in various packaged configurations. Some limitations apply.
Consult factory for details.
Each type offers trade offs in series resistance, junction capacitance, carrier
lifetime and breakdown voltage; the proper choice of which depends on the
end application. Standard polarity diodes (PIN) and faster speed PIN and
NIP diodes are also available. (See data sheets for GC4400, GC4200, and
GC4300 series respectively.)
ELECTRICAL
Copyright  2006
Rev.: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 2
GC4510 – GC4533
CONTROL DEVICES
High Voltage NIP Diodes
®
TM
RoHS Compliant
TYPICAL RS CURVES
TYPICAL RS CURVES
www.MICROSEMI.com
GRAPHS
Copyright  2006
Rev.: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 3
GC4510 – GC4533
CONTROL DEVICES
High Voltage NIP Diodes
®
TM
RoHS Compliant
PACKAGE STYLE 00
PACKAGE SYLE 30
www.MICROSEMI.com
Notes:
-
Dimensions vary by model number
-
Consult factory for details
-
Order as GC45xx – 00
Notes:
-
Order as GC45xx – 30
PACKAGE STYLE 115
MECHANICAL
Notes:
-
Order as GC45xx – 115
OTHER PACKAGE STYLES AVAILABLE ON REQUEST
CONSULT FACTORY
Copyright  2006
Rev.: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 4
Similar pages