Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz MS-180 Series Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ■Overview Developed for inspection of high frequency circuits used in portable terminals.Verification of the circuit performance is accomplished by simply inserting the external plug in the board mounted receptacle.This action re-directs the circuit from normal condition to the plug side. Removing the plug restores circuit to its normal condition. The plug connector has been also downsized and the diameter made slimmer than previous products, to give the test tool layout a degree of freedom. ■Features 1. Low insertion loss 0.1 dB Max. up to 3.0 GHz (not mated with the plug). 0.2 dB Max. up to 6 GHz (not mated with the plug). 0.3 dB Max. up to 11 GHz (not mated with the plug). Space-saving design Low profile -0.85mm protrusion above the board. Small space-1.8mm x 1.8mm occupied board space. 2. Space-saving and low profile design 0.85mm high above the board. 1.8mm x 1.8mm occupied board space. 3. Performs over a wide frequency range Applicable frequencies range over a wide band, from DC to 11 GHz. 4. Miniaturization of the non-implementable area and set aperture hole The external diameter of the plug tip is as narrow as Ø2.24mm, the non-implementable area and set aperture hole can be minimized. Size comparison with the existing MS-156C ●Top view 5. Automatic board placement Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic placement equipment. 2.3 1.8 2.3 6. Beryllium Free, Halogen Free Chlorine, and bromine are not used in the receptacles. *Definition according to IEC 61249-2-21. Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500 ppm max. 1.8 38.7% saving of space ●Height 1.35 0.85 37% lower profile ●Weight 0.016g 0.007g 56.3% lighter weight 2014.10w 1 MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz ■Specifications Operating temperature range -40ç to +85ç Rated power 2W DC to 11 GHz Not mated with the plug Frequency range DC to 8 GHz Mated (MS-180-HRMJ-3) 1.2 max. (DC to 3.0 GHz) V.S.W.R. 1.2 max. (DC to 3.0 GHz) 1.3 max. (3.0 GHz to 6.0 GHz) 1.3 max. (3.0 to 8.0 GHz) 1.4 max. (6.0 GHz to 11.0 GHz) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Insertion loss 0.1 dB max. (DC to 3.0 GHz) 0.3 dB max. (DC to 3.0 GHz) 0.2 dB max. (3.0 GHz to 6.0 GHz) 0.5 dB max. (3.0 GHz to 6.0 GHz) 0.3 dB max. (6.0 GHz to 11.0 GHz) 0.6 dB max. (6.0 GHz to 8.0 GHz) 25 dB min. (DC to 3.0 GHz) Isolation 20 dB min. (3.0 GHz to 6.0 GHz) 12 dB min. (6.0 GHz to 11.0 GHz) Item Specification Conditions 1. Contact resistance 100mø max. 100mA max. 2. Insulation resistance 1000Mø min. 100V DC 3. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute 4. Vibration No electrical discontinuity of 1 µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 axis 5. Shock No electrical discontinuity of 1 µs or more Acceleration of 490m/s , 11 ms duration, sine halfwave, 3 cycles in each of the 3 axis 6. Temperature cycle Contact resistance: 100 mø max. Insulation resistance: 10 Mø min. Time: 30 → 2 to 3 → 30 → 2 to 3 minutes 7. High temperature exposure Contact resistance: 100 mø max. Insulation resistance: 10 Mø min. 96 hours at 85ç 8. Low temperature exposure Contact resistance: 100 mø max. Insulation resistance: 10 Mø min. 96 hours at -55ç 9. Humidity (Steady state) Contact resistance: 100 mø max. Insulation resistance: 10 Mø min. 96 hours at 40±2ç and humidity of 90 to 95% 10. Durability Contact resistance: 100 mø max. 100 cycles 2 Temperature : -55ç → +15ç to +35ç → +85ç → +15°C to +35°C 100 cycles ■Materials Part Shell 2 Material Finish Remarks Brass Partially gold plating --------- Insulator LCP Common terminal Copper alloy Partially gold plating --------- UL94V-0 --------- Antenna terminal Copper alloy Partially gold plating --------- MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz ■Typical Data Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ●NORMALLY CLOSED(Not Mated with the plug) Frequency[GHz] ●NORMALLY OPEN(Mated with the plug) Frequency[GHz] Frequency[GHz] 3 MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz ■Receptacle Ø1.2 0.85 0.285 Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.8 1.8 Part No. HRS No. Packaging MS-180 358-0265-7 15,000 pcs/reel MS-180(20) 358-0265-7 20 3,000 pcs/reel Ｃ terminal 0.2 Ａ terminal 0.2 ■Circuit diagram CdibViZYl^i]i]Zeaj\C#8 BViZYl^i]i]Zeaj\C#D 0.45 Ｇ Ｇ Ｇ Ｇ Ａ Ａ Ｂ Ｃ Ｂ Ｃ Ｇ Ｇ Ｇ Ｇ Eaj\ 0.45 （0.9） BH"&-% Eaj\ BH"&-% 2∞ （1.35） 1.9 Ａ terminal 2∞0.8 2∞0.275 2∞0.3 （1.6） 1.1 1.3 0.25 （1.9） 0.44 1.06 0.44 （1.94） 0.3 Ｃ terminal 0.25 2∞ C 0. 1 0.3 1.1 1.6 2 0.3 0.7 2∞0.275 0.3 2∞ C 0. 2 ■Specified PCB mounting pattern and metalmask dimensions 0.25 1.39 0.25 （1.89） : This area must be free of conductive traces and resist field. Note. ・Please always reflow the product using specified PCB mounting pattern and metalmask dimensions. Otherwise it may cause solder wicking and/or flux penetration affecting the product performance. ・Do not use hand soldering for mounting of MS-180 Doing so could result in solder and flux wicking to the contact areas. 4 MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz BRecommended Temperature Profile Using Lead-free Solder paste &%hZX#bVm IZbeZgVijgZ '+% '(% ''% '%% &-% &*% : 260ç w Peak temperature time : 10 sec. max. e 230ç min. : 40 sec. max. r 220ç min. : 60 sec. to 150 sec. t 180ç to 200ç : 60 sec. to 120 sec. Metal mask thickness Reflow cycles &%% : 0.1 mm : 2 cycles *% +%hZX#id&'%hZX# I^bZhZX# )%hZX#bVm +%hZX#id&*%hZX# BPackaging Specifications ) 9 ' &#(* 8iZgb^cVa &' *#* &#,* 8iZgb^cVa 6iZgb^cVa 6iZgb^cVa Ｄ JcgZZa^c\Y^gZXi^dc : : GZZaY^bZci^dch JcgZZa^c\Y^gZXi^dc &'#) ¢*%bVm ( ¢& ¢G Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. q Maximum temperature Reel size Packaging MS-180 Part No. Ø380mm 15,000 pcs/reel MS-180(20) Ø180mm 3,000 pcs/reel 5 MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz ■Test adaptors with SMA connection ●Rigid body structure with mounting flange (designed for mass production testing) 2× Ø2 32.15 1 22.65 .6 8.6 14 2×R Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ø5.4 Ø2.24 11.75 1/4-36UNS-2A 10 •By using 6-10 N of force, this version will mate vertically with the MS-180 receptacle. •This durability rating only applies to this specific test adaptor. Part No. HRS No. Durability MS-180-HRMJ-3 358-0318-1 10,000 cycles ●Floating version (Designed for mass production use) ' ¢' & -#* &% 'G ¢* &$)"(+JCH"'6 6 - +#' Higd`ZgVc\Z '&#,*"''#,* •The test adaptor will mate vertically with the MS-180 receptacle. Please note the specified stroke length. •This durability rating only applies to this specific test adaptor. #+ &) ¢'#') ((#'* '(#,* Part No. HRS No. Durability MS-180-HRMJ-F5 358-0321-6 10,000 cycles MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz ■Plugs and Plug Assemblies ●Friction locking version (Designed for prototype/manual evaluation use) 14.32 6.12 4.8 2 Part No. HRS No. Durability MS-180-040LP-H3 358-0319-4 500 cycles •The plugs locking system provides the retention force needed between the plug and the MS-180 receptacle to manually test the application. Vertical mating required for testing. •This durability rating only applies to this specific plug. •This product is sold as a complete assembly; please make your selection from the products shown on the right. Customization is available for cable assemblies; please contact your local Hirose Sales Representative for the availability of special cable lengths and other options being offered. 100 1/4-36UNS-2A Part No. HRS No. Durability MS180LH3-HRMJ-040V100 362-0224-9 01 500 cycles ●Positive locking version (Designed for prototype/manual evaluation use) 1.1 6.2 22.1 4.27 5.8 Ø8.4 Ø2.3 Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 5.3 Ø2.4 Ø3.6 1.3 Ø2.5 Part No. HRS No. Durability MS-180-088LP-H1 358-0269-8 500 cycles •The plug’s locking system provides the positive retention force needed between the plug and the MS-180 receptacle to manually test the application. Vertical mating required for testing. •This durability rating only applies to this specific plug. •This product is sold as a complete assembly; please make your selection from the products shown on the right. Customization is available for cable assemblies; please contact your local Hirose Sales Representative for the availability of special cable lengths and other options being offered. 100 1/4-36UNS-2A Part No. HRS No. Durability MS180LH1-HRMJ-088V100 362-0223-6 01 500 cycles 7 MS-180 Series●Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz BPrecautions Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1. Do not use the washing process. 2.During the design phase of the device, please make sure that extra force will not be exerted onto this connector in the event that it is dropped. 3. This product is intended to be used for circuit inspection only. Consult us if any other application is considered. 4. Plugs can be roughly classified to two types. For mass production line automatic check (Press down type) For manual check (With retentive lock) : Unable to be used at production line. 5. Do not use hand soldering for mounting of MS-180. Doing so could result in solder and flux wicking to the contact areas. 6. When using a heat gun, hot plate, or similar methods, limit the temperature to 260ç applied for 10 seconds max. 7. Please always reflow the product using specified PCB mounting pattern and metalmask dimensions. Otherwise it may cause solder wicking and/or flux penetration affecting the product performance. 8. Please refrain from using the product in environments specifically affected by dust, high humidity, gases, very high temperatures and very low temperatures. 9. Exercise caution as not to allow any debris to enter the board mounted MS-180 when cutting PCB. Powered by TCPDF (www.tcpdf.org) ® 8 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 10/2014. Contents are subject to change without notice for the purpose of improvements.