Kemet C878AG35500AA1J Motor run capacitor Datasheet

Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure
Protection, 420 VAC/470 VAC
Overview
Applications
Polypropylene metallized film with cylindrical aluminium can
type filled with resin; faston, plastic deck or cable terminals and
overpressure safety device.
Typical applications include motor run P2 safety class: singlephase motors, low power electric motors and compressors.
Benefits
•
•
•
•
•
Self-healing
VDE, CQC and UL810 approved
Rated frequency of 50 Hz and 60 Hz
High capacitance density
Safety device protection
Part Number System
C87
8
Series
C87 =
Motor Run
Capacitors
0 = 10,000
hours/420 VAC
(Class B) or 3,000
hours/470 VAC
(Class C)
8 = 30,000
hours/420 VAC
(Class A) or 10,000
hours/470 VAC
(Class B)
B
Marking
C870:
C = Standard
D = UL
Z = Special
C878:
A = Standard
B = UL
Z = Special
F
Case & Fixing
Bolt Code
F = Cylindrical
aluminum can with
M8 bolt
G = Cylindrical
aluminum can with
M12 bolt
E= Without fixing
bolt/flat bottom
3
Terminal Style
1 = Single faston
2.8 x 0.8 (hole)
2 = Single faston
6.3 x 0.8
3 = Double faston
6.3 x 0.8
4 = Single faston
2.8 x 0.8 (slot)
5 = Single faston
2.8 x 0.5 (hole)
4300
AA
Capacitance Code
Packaging
(pF)
Digits 2-4 indicate AA =
the first three
Standard
digits of the
capacitance value.
First digit indicates
the number of
zeros to be added.
4
Internal
Use
0, 1, 2,
4, 5 =
Standard
J
Tolerance
J = 5%
K = 10%
R = 0 to +10%
X = Special
tolerance
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
1
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Dimensions – Millimeters
D
H
+1/-0
±2
Mounting Stud
(M)
25
25
25
30
30
30
35
35
35
35
40
40
45
45
45
50
55
60
60
48
60
78
48
60
78
48
60
78
98
78
98
78
98
133
133
133
98
133
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M8 x 10
M12 x 12.5
M12 x 12.5
M12 x 12.5
M12 x 12.5
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
2
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Performance Characteristics
Type of Service
Continuous
Operating Class
C87/8
Class B 10,000 hours at 470 VAC, Class A 30,000 hours at 420 VAC
C87/0
Class B 10,000 hours at 420 VAC, Class C 3,000 hours at 470 VAC
C87/1
None
C87/5
None
Temperature Range
Rated Voltage
-25 to +85°C
470 VAC
Rated Frequency
50 – 60 Hz
Voltage Rise/Fall Time
(Maximum)
0 = 15 V/μs
8 = 20 V/μs
Maximum Permissible Voltage
1.10 x rated voltage
Maximum Permissible Current
1.30 x rated current
Dissipation Factor (DF)
Safety Class
Maximum Altitude
Capacitance Tolerance
Mounting
Case
Disk
Filling Resin
Dielectric
Plates
Test Voltage Terminal to
Terminal (V TT)
Test Voltage Terminal to Can
(V TC)
Total Harmonic Distortion
Fire Load
20 x 10 -4 at +20°C, 50Hz
P2
2,000 m
±5%
Any position
Aluminium
Thermoplastic Polymer V0 (UL 94)
Plastic deck with:
- self-extinguishing features V0 (UL94)
- GWT–GWFI–GWIT value in conformity with the Standard IEC60335-1
ed.4 par.30/EN60335-1 ed.3 par.30
Polyurethane
Polypropylene
Self-healing metal layer
2 Vn for 2 seconds
2,000 V for 2 seconds
Up to 10%
40 MJ/kg
Air Distance Between Live
Parts
≥ 5 mm
Air Distance Between Live
Parts and Case
≥ 6 mm
Vibration Test
Maximum Tightening Torque
IEC 68-2-6
5 Nm (M8), 10 Nm (M12)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
3
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
VAC
16
18
20
20
22
25
25
30
35
40
45
50
60
70
75
75
80
100
100
100
110
1
1.5
1.8
2
2.5
3
3.5
4
5
6
7.5
8
10
11
12
15
16
20
23
25
29
30
46
50
55
60
8
8
10
12
12
16
16
20
25
30
40
1
2
2.5
Capacitance
Value (µF)
Maximum Dimensions in mm
D
H
dV/dt
(V/µs)
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
470
470
470
470
470
470
470
470
470
470
470
470
470
470
40
40
35
35
40
45
40
40
45
45
45
50
60
55
60
50
50
55
55
60
60
30
30
30
30
30
30
35
35
30
30
30
30
35
35
35
40
40
45
45
45
45
45
45
50
50
50
30
35
35
35
40
40
40
45
45
45
45
30
30
30
78
78
98
98
78
78
98
98
98
98
133
133
98
133
133
133
133
133
133
133
133
48
48
48
48
48
48
48
48
60
78
78
78
78
78
78
78
78
78
78
98
98
98
133
133
133
133
78
78
78
78
78
78
98
78
98
98
133
48
48
48
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Single Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
C870CF35160AA1J
C870CF35180AA0J
C870CF35200AA0J
C870CF35200AA1J
C870CF35220AA0J
C870CF35250AA0J
C870CF35250AA1J
C870CF35300AA1J
C870CF35350AA0J
C870CF35400AA0J
C870CF35450AA0J
C870CG35500AA1J
C870CG35600AA5J
C870CG35700AA1J
C870CG35750AA0J
C870CG35750AA2J
C870CG35800AA2J
C870CG36100AA0J
C870CG36100AA0K
C870CG36100AA1J
C870CG36110AA0J
C878BF34100SA4J
C878BF34150SA4J
C878ZF34180SA0J
C878BF34200SA0J
C878BF34250SA4J
C878BF34300SA4J
C878BF34350SA4J
C878BF34400SA0J
C878BF34500SA0J
C878BF34600SA0J
C878BF34750SA0J
C878BF34800SA0J
C878BF35100SA0J
C878BF35110SA0J
C878BF35120SA0J
C878BF35150SA0J
C878BF35160SA0J
C878BF35200SA0J
C878BF35230SA0J
C878BF35250SA0J
C878BF35290SA0J
C878BF35300SA0J
C878BF35460SA0J
C878BF35500SA0J
C878BF35550SA0J
C878BF35600SA0J
C878AF24800AA0J
C878AF24800AA1J
C878AF25100AA0J
C878AF25120AA0J
C878AF25120AA1J
C878AF25160AA0J
C878AF25160AA1J
C878AF25200AA0J
C878AF25250AA0J
C878AF25300AA0J
C878AF25400AA0J
C878AF34100AA4J
C878AF34200AA4J
C878AF34250AA4J
VAC
B (mm)
H (mm)
dV/dt
(V/µs)
Termination
Part Number
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Termination
Part Number
F3063_C87 • 11/20/2015
4
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Table 1 – Ratings & Part Number Reference cont'd
Capacitance
Value (µF)
VAC
3
3.5
4
5
6
6
7.5
7.5
8
9
10
11
12
12
12.5
14
15
16
16
16
18
20
22.5
25
30
30
31.5
35
40
40
45
50
50
55
60
60
80
Capacitance
Value (µF)
Maximum Dimensions in mm
D
H
dV/dt
(V/µs)
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
30
35
35
35
30
35
30
35
30
35
35
35
35
40
35
40
40
40
40
35
45
45
45
45
45
45
45
45
45
50
50
50
55
50
50
60
60
48
48
48
48
78
78
78
60
78
78
78
78
78
78
78
78
78
78
98
98
78
78
78
98
98
133
98
133
133
133
133
133
133
133
133
133
133
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
Double Fast-On
C878AF34300AA4J
C878AF34350AA4J
C878AF34400AA4J
C878AF34500AA4J
C878AF34600AA0J
C878AF34600AA1J
C878AF34750AA0J
C878AF34750AA2J
C878AF34800AA0J
C878AF34900AA0J
C878AF35100AA0J
C878AF35110AA0J
C878AF35120AA0J
C878AF35120AA1J
C878AF35125AA0J
C878AF35140AA0J
C878AF35150AA0J
C878AF35160AA0J
C878AF35160AA1J
C878AF35160AA2J
C878AF35180AA0J
C878AF35200AA0J
C878AF35225AA0J
C878AF35250AA0J
C878AF35300AA0J
C878AF35300AA1J
C878AF35315AA0J
C878AF35350AA0J
C878AF35400AA0J
C878AG35400AA2J
C878AG35450AA0J
C878AG35500AA0J
C878AG35500AA1J
C878AG35550AA0J
C878AG35600AA0J
C878AG35600AA1J
C878AG35800AA0J
VAC
B (mm)
H (mm)
dV/dt
(V/µs)
Termination
Part Number
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Termination
Part Number
F3063_C87 • 11/20/2015
5
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Expected Life Hours
C878
C870
Marking
MKP C87
Capacitance Tolerance/Safety Class
Capacitor Class
Climate Class
Rated Voltage based on UL Standards
UL Approvals
Self-Healing dielectric
Data Code
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
6
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Dissipation Factor
Dissipation factor is a complex function involved with the inefficiency of the capacitor. The tgδ may change up and down with increased
temperature. For more information, please refer to Performance Characteristics.
Sealing
Hermetically Sealed Capacitors
When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a
breach in the capacitor which can result in leakage, impregnation, filling fluid or moisture susceptibility.
Resin Encased/Wrap & Fill Capacitors
The resin seals on resin encased and wrap and fill capacitors will withstand short-term exposure to high humidity environments without
degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. These case materials are
somewhat porous and through osmosis can cause contaminants to enter the capacitor. The second area of contaminated absorption
is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the
capacitor section. Aqueous cleaning of circuit boards can aggravate this condition.
Barometric Pressure
The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the barometric
pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due
to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. Heat
transfer can also be affected by altitude operation. Heat generated in operation cannot be dissipated properly and can result in high RI2
losses and eventual failure.
Radiation
Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric embitterment can
take place causing shorts or opens.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
7
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of
both our capacitors and the production of them.
In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of
some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers'
obligations to guarantee their products to fulfill these legislative requirements. The only material of concern in our products has
been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of Lead in any
homogeneous material.
KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.
Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To
clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible
capacitors.
Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label.
Materials & Environment
The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and constant attention
to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out statistical analysis on the
materials purchased before acceptance. All materials are, to the company's present knowledge, non-toxic and free from Cadmium,
Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine Dioxins Bromurate Clorurate, CFC and HCFC
and Asbestos.
Green Products
All KEMET power film products are ROHS Compliant.
Insulation Resistance
When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity. Low
insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive
humidity.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
8
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Northeast
Wilmington, MA
Tel: 978-658-1663
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
9
Motor Run Capacitors
C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC
Prototype Sample Disclaimer
The Customer acknowledges the following limitations of the prototype samples:
(1) Prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent final designs; have not been released for
commercial use and are not subject to the same quality control procedures applicable to released products.
(2) Prototype samples are not qualified parts and are provided “as-is” by KEMET Electronics Corporation, which specifically disclaims any and all warranties and
guarantees, explicit or implied, including, without limitation, the warranties of merchantability and fitness for a particular purpose or use.
(3) Prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the Customer’s
production line.
(4) The Customer assumes the risk ofany and alluses that the Customer makes of the prototype samples.
General Disclaimer
“All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty,
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for
such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use.
This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application.
KEMET’s product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.”
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3063_C87 • 11/20/2015
10
Similar pages