Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Array Data Sheet 1 EMIFILr (LC Combined) Array NFA21SL_X Series (0805 Size) ■ Dimensions ■ Equivalent Circuit Polarity Marking 2.0±0.1 (3) (4) (5) (6) GND (2) (7) (8) (9) (10) 0.2±0.15 0.15 min. (3) (4) (5) (6) (3)(4)(5)(6): IN (OUT) (7)(8)(9)(10): OUT (IN) 0.25±0.1 (1) GND GND (2) T 0.25±0.1 0.25±0.1 0.2±0.15 (1) GND 1.25±0.1 (Top View) 0.5±0.05 (7) Part Number T NFA21SLpppX1A45p 0.5±0.1 NFA21SLpppV1A45p NFA21SLpppX1A48p 0.85±0.1 NFA21SLpppV1A48p (Bottom View) : Electrode (10) ■ Packaging Code Packaging Minimum Quantity NFA21SL506X1A48 L 180mm Embossed Tape 4000 NFA21SL806X1A48 NFA21SL207X1A45(48) NFA21SL307X1A45(48) B Bulk(Bag) 1000 (50Ω - 50Ω) 0 Insertion Loss (dB) (9) (in mm) ■ Insertion Loss Characteristics (Main Items) 20 (8) 40 60 80 1 10 100 Frequency (MHz) 1000 3000 ■ Rated Value (p: packaging code) Part Number Nominal Cut-off Frequency Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Voltage Rated Current (Cut-off Frequency) (500MHz) (min.) (800MHz) (min.) (1000MHz) (min.) NFA21SL207X1A45p 200MHz 2 to 7 NFA21SL307X1A45p 300MHz NFA21SL506X1A48p 50MHz NFA21SL806X1A48p NFA21SL207X1A48p NFA21SL307X1A48p 300MHz Insulation Resistance Withstand (min.) Voltage 13dB 25dB 25dB 10Vdc 100mA 1000M ohm 30Vdc 2 to 7 7dB 20dB 25dB 10Vdc 100mA 1000M ohm 30Vdc 0 to 6 30dB - 20dB 10Vdc 20mA 1000M ohm 30Vdc 80MHz 2 to 7 25dB - 25dB 10Vdc 20mA 1000M ohm 30Vdc 200MHz 2 to 7 13dB 25dB 25dB 10Vdc 100mA 1000M ohm 30Vdc 2 to 7 7dB 20dB 25dB 10Vdc 100mA 1000M ohm 30Vdc Operating Temperature Range: -55°C to +125°C Number of Circuits: 4 Continued on the following page. o This data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.5.1 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Array Data Sheet 2 Continued from the preceding page. ■ !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. o This data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.5.1 http://www.murata.com/