C5 C5 Open-Loop Stepper Motor Controller Open-Loop Stepper Motor Controller SOFTWARE DIMENSIONS (IN MM) C5-01 81 * X3 X2 * * X4 * S1 X5 22 12.5 X1 56 12.5 * Pin 1 123 4 L1 M 4 x0.7- 6H 12.5 43.75 M3 18.25 C5 6- R2.25 M otor C ontroller 18.25 43.75 88 74 44 81 5 TECHNICAL DATA Operating voltage 12-48 VDC +/- 5% Max. current (RMS) 6A Operating modes Torque, speed, position, homing Setpoint setting/programming Clock-direction/analog/NanoJ Digital inputs 3 Digital inputs, 24 V, 3 digital inputs switchable 5/24 V, single ended (inverted inputs not used) or differential Analog inputs 1 analog input, switchable 0-10 V/0-20 mA Digital outputs 2 digital outputs, open drain, 24 V/100 mA DIP switch 1 DIP switch with 4 poles Status LED Bicolor red/green Dimensions 88x56x22 mm Protective function Overtemperature, overvoltage (balance circuit), inverse polarity (needs fuse in supply cable) Type Min. Operating Voltage V Max. Operating Voltage V Nominal Current A Controller for Interface Weight kg C5-01 12 48 6 Stepper Motors USB 0.13 ORDER IDENTIFIER C5-01 188 ACCESSORIES ZK-MICROUSB USB Cable MOTOR CONTROLLERS VERSIONS CAUTION For stabilizing the operating voltage, we recommend using a sufficiently dimensioned decoupling capacitor. MOTOR CONTROLLERS MOTOR CONTROLLERS 189