IPSAT Series Intrinsically Safe Pressure Transducer Approvals:ATEX / IECEx EII Ex ia IIC T4 Ga Ta (see schedule) Piezo-resistive thick film ceramic sensor Stainless steel body Accuracy <±0.25% FS BFSL Pressure ranges from -1 to 400 bar The IPSAT series is ideally suited for use in a wide range of industrial applications in hazardous areas. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially industrial applications. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Electrical Protection Supply reverse polarity Electromagnetic compatibility Mechanical Stability Shock Vibration Environment & Thermal Effects Operating Temperature Storage temperature Compensated temperature range Thermal Zero Shift (TZS) Thermal Span Shift Permissible environment zone 0 Pressure Ranges Nominal Pressure, Gauge, Compound range Permissible Overpressure Burst Pressure bar bar bar bar Output Signal and Supply Voltage Wire system Output 2-wire 4-20mA Performance No damage but also no function Accuracy (Non-Linearity & Hysteresis) <±0.25% / FS (BFSL) Setting Errors (offsets) Zero & Full Scale, <±0.5% / FS CE Compliant Material Specifications 100g / 11s Housing 316 Stainless Steel 10g RMS (20 - 2000Hz) “O” ring seals Viton Diaphragm Ceramic Al2O3 96% -20ºC to +120ºC Media wetted parts Housing & connection, “O” ring seal, -40ºC to +110ºC diaphragm +20ºC to +80ºC Weight Approx 100g <±0.04% /FS/ºC Installation position Any 6 <±0.015% /ºC Operational Life > 100x 10 cycles -20ºC to +60ºC Insulation resistance > 50MOhms at 50Vdc with patm 0.8 to 1.1 bar 1 -1 to 0 2 4 2 -1 to 2 4 5 5 -1 to 5 10 12 Supply Voltage 10-28Vdc 10 20 50 -1 to 9 -1 to 19 -1 to 24 20 40 100 25 50 120 Connection Pin Nos +ve Supply Pin 1 100 250 400 200 250 400 500 650 650 -ve Supply Pin 2 Ground Earth Pin Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001C E R T I F I E D www.cynergy3.com IPSAT 2016 © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. IPSAT Series Intrinsically Safe Pressure Transducer Part Number IPSAT-G1000-5 IPSAT-G6000-5 IPSAT-GM1P9-5 IPSAT-G1002-5 IPSAT-G1602-5 IPSAT-C0184-5 IPSAT-G2502-5 IPSAT-G4002-5 IPSAT-G1003-5 IPSAT-G2503-5 IPSAT-G4003-5 Pressure Rating 0 - 1 Bar G 0 - 6 Bar G -1 to +9 Bar G 0 - 10 Bar G 0 - 16 bar G -1 to +24 Bar G 0 - 25 Bar G 0 - 40 Bar G 0 - 100 Bar G 0 - 250 Bar G 0 - 400 Bar G Mechanical Dimensions Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.