13 October 2011 Specification for monolithic crystal filter: M Q F 9 0 . 0 – 3 0 0 0 / 1 0 1. General 1.1. Package: Terminate plate materials: Ni / Au Ni > 2.0 µm Au > 0.75 µm 1.2. 1.3. 1.4. 1.5. 1.6. Type name: Number of poles: Operating temperature range: Operable temperature range: Storage temperature range: 2. Electric values 2.1. Nominal centre frequency fo: MQF 90.0-3000/10 2 -20°C to +85°C -40°C to +85°C -55°C to +125°C 90.0 MHz 2.2. Pass band 2.2.1. Bandwidth between 3 dB - frequencies: > 15 kHz 2.2.2. Ripple: < 0.5 dB at fo 7.5 kHz 2.2.3. Insertion loss: ( measured on smallest attenuation in pass band ) < 1.0 dB 2.3. Stop band 2.3.1. fo 50 kHz > 16 dB 2.3.2. Alternate attenuation: > 30 dB 2.3.3. Spurious responses: fo 50 kHz…500kHz > 10 dB 2.4. Group delay: fo 15 kHz < 6 µs 2.5. Intermodulation 2.5.1. frequency 1 / 2 90.10 / 90.20 2.5.2. frequency 3 / 4 89.90 / 89.80 2.5.3. input power level -10 dBm 2.5.4. IP3 > 30 dBm 2.6. Terminating impedance ( input and output ): 3000 // - 0.7 pF 2.7. Nominal input power level -10 dBm 2.7.1 Maximum input power level + 5 dBm 3. • M90A1 Marking: VI yyww 4. Environment conditions according to Vectron CF001 4.1. Parallel flow of environment tests according to MIL-STD: 20g vib, per MIL-STD 883, procedure 2007.3, condition A 3000g shock, per MIL-STD 883, procedure 2002.4, condition C 5000g shock, per MIL-STD 883, procedure 2002.4, condition D 5. Packing Drawing out direction maximum 1000 pcs. / reel Marking Marking Marking Marking Marking Marking Marking Marking Tape dimension ( mm ) Trailer leader part ( 400mm min, ) cover tape carrier tape 200mm min. 150mm min. components placed carrier tape cover tape 160mm min. 240mm min. Marking Marking Marking Marking Marking Marking Marking Marking Marking Marking Drawing out direction ( leading direction ) Tape ( all dimensions in mm ) P2 W: 16.0 ± 0.1 Po: 4.0 ± 0.1 P1: 8.0 ± 0.1 P2: 2.0 ± 0.1 Do: 1.5 +0.1 / -0 D1: 1.6 +0.1 / -0 E: 1.75 ± 0.1 F: 7.5 ± 0.1 Ko: 1.7 ± 0.1 Ao: 5.6 ± 0.1 Bo: 7.6 ± 0.1 t: 0.3 ± 0.05 P1 Po Bo W F D1 Do E t Ao Ko W2 A ø 178 ± 2 ø 13 ± 0.5 ø 60 ± 1 17.5 ± 1.5 21.5 ± 1.5 N A: C: N: W1: W2: C Reel ( all dimension in mm ) W1 ______________________________________________________________________ Edited by: date: _____________________ name: ___________________________