UTC MBR1100G-Z41-B Schottky barrier rectifier Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR1100
Preliminary
DIODE
1.0A, 100V SCHOTTKY
BARRIER RECTIFIER

1
DESCRIPTION
The UTC MBR1100 is a 1.0A schottky barrier rectifier, it uses
UTC’s advanced technology to provide customers with low forward
voltage drop, low reverse current and high efficiency, etc.
The UTC MBR1100 is suitable for free wheeling diodes, high
frequency inverters, low voltage and polarity protection diodes.

FEATURES
DO-41
2
* Low forward voltage drop
* Low reverse current
* High surge capacity
* Low power loss
* High efficiency


SYMBOL
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MBR1100L-Z41-B
MBR1100G-Z41-B
MBR1100L-Z41-R
MBR1100G-Z41-R
Note: Pin Assignment: A: Anode
K: Cathode
MBR1100L-Z41-B
(1)Packing Type

Package
DO-41
DO-41
Pin Assignment
1
2
K
A
K
A
Packing
Tape Box
Tape Reel
(1) B: Tape Box, R: Tape Reel
(2)Package Type
(2) Z41: DO-41
(3)Green Package
(3) L: Lead Free, G: Halogen Free and Lead Free
MARKING
Cathode Band for uni-directional Only
MBR1100
L: Lead Free
G: Halogen Free
Date Code
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-270.b
MBR1100

Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VR
100
V
Working Peak Reverse Voltage
VRWM
100
V
Repetitive Peak Reverse Voltage
VRRM
100
V
Maximum RMS Reverse Voltage
VR(RMS)
70
V
Average Forward Rectified Output Current
IO
1.0
A
Non-Repetitive Peak Forward Surge Current
IFSM
50
A
8.3ms Single Half-Sine-Wave
Voltage Rate of Change (Rated VR)
dv/dt
10
V/ns
Operating Junction Temperature (Note 1)
TJ
-65~+150
°C
Storage Temperature (Note 1)
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS
PARAMETER
Junction to Ambient

SYMBOL
θJA
RATINGS
50
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (Note 2) (TA=25°C, unless otherwise noted.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
IF=1A, TL=25°C
0.79
V
Instantaneous Forward Voltage (Note 2)
VF
IF=1A, TL=100°C
0.69
V
Instantaneous Reverse Current @ Rated dc
TL=25°C
50
μA
IR
Voltage (Note 2)
5.0 mA
TL=100°C
Notes: 1. The heat generated must be less than the thermal conductivity from Junction to Ambient: PD/TJ<1/θJA.
2. Pulse Test: Pulse Width=300μs, Duty Cycle≤2.0%.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-270.b
MBR1100
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-270.b
Similar pages