Fairchild NC7SZ18FHX Tinylogicâ® uhs 1-of-2 non-inverting de-multiplexer with 3-state deselected output Datasheet

NC7SZ18
TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer
with 3-STATE Deselected Output
Features
Description

Ultra-High Speed: tPD 2.5ns Typical at 5V
VCC




High Impedance Output when Deselected


Proprietary Noise/EMI Reduction Circuitry
The NC7SZ18 is a 1-of-2 non-inverting demultiplexer.
The device will buffer the data on the A pin and pass to
either output Y0 or Y1 dependent on whether state of the
select pin (S) is LOW or HIGH respectively. The
deselected output will be placed into a high impedance
state. The device is fabricated with advanced CMOS
technology to achieve ultra high speed with high output
drive while maintaining low static power dissipation over
a broad VCC operating range. The device is specified to
operate over the 1.65V to 5.5V VCC operating range.
The inputs and outputs are high impedance when VCC is
0V. Inputs tolerate voltages up to 5.5V independent of
VCC operating range.
Broad VCC Operating Range: 1.65V to 5.50V
Power Down High Impedance Inputs/Outputs
Over-Voltage Tolerance Inputs Facilitate 5V to 3V
Translation
Ultra-Small MicroPak™ Packages
Ordering Information
Part Number
Top Mark
Package
Packing Method
NC7SZ18P6X
Z18
6-Lead SC70, EIAJ SC88 1.25mm Wide
3000 Units on Tape & Reel
NC7SZ18L6X
D5
6-Lead MicroPak™, 1.00mm Wide
5000 Units on Tape & Reel
NC7SZ18FHX
D5
6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch
5000 Units on Tape & Reel
®
TinyLogic is a registered trademark of Fairchild Semiconductor Corporation.
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
www.fairchildsemi.com
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
June 2011
Figure 1. SC70 (Top View)
Figure 2. MicroPak™ (Top Through View)
Figure 3. Pin 1 Orientation
Notes:
1. AAA represents product code top mark (see Ordering Information).
2. Orientation of top mark determines pin one location.
3. Reading the top mark left to right, pin one is the lower left pin.
Pin Definitions
Pin # SC70
Pin # MicroPak™
Name
Description
1
1
S
2
2
GND
Data Input
3
3
A
Demultiplexer Data
4
4
Y1
Output
5
5
VCC
Supply Voltage
6
6
Y0
Output
Ground
Function Table
Inputs
Output
S
A
Y0
Y1
L
L
L
Z
Z
L
H
H
H
L
Z
L
H
H
Z
H
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
Pin Configurations
H = HIGH Logic Level
L = LOW Logic Level
X = 3-STATE
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
7.0
V
VIN
DC Input Voltage
-0.5
7.0
V
VOUT
7.0
V
IIK
DC Input Diode Current
VIN  -0.5V
-50
mA
IOK
DC Output Diode Current
VIN  -0.5V
-50
mA
IOUT
DC Output Current
±50
mA
ICC or IGND
TSTG
DC Output Voltage
-0.5
DC VCC or Ground Current
Storage Temperature Range
-65
±100
mA
+150
°C
TJ
Junction Temperature Under Bias
+150
°C
TL
Junction Lead Temperature (Soldering, 10 Seconds)
+260
°C
PD
Power Dissipation at +85°C
ESD
SC70-6
180
MicroPak™-6
130
MicroPak2™-6
120
Human Body Model, JEDEC:JESD22-A114
4000
Charge Device Model, JEDEC:JESD22-C101
2000
mW
V
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
VCC
VIN
VOUT
tr, tf
TA
JA
Parameter
Min.
Max.
Supply Voltage Operating
1.65
5.50
Supply Voltage Data Retention
1.5
5.5
Input Voltage
0
5.5
V
Output Voltage
0
VCC
V
VCC at 1.8V, ±0.15V,
2.5V ± 0.2V
0
20
VCC at 3.3V ± 0.3V
0
10
VCC at 5.0V ± 0.5V
0
5
-40
+85
Input Rise and Fall Times
Conditions
Operating Temperature
Thermal Resistance
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
SC70-6
425
MicroPak™-6
500
MicroPak2™-6
560
Unit
V
ns/V
°C
°C/W
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
Absolute Maximum Ratings
www.fairchildsemi.com
3
Symbol
Parameter
VCC
TA=-40 to
+85°C
TA=+25°C
Condition
Min.
Typ.
Max.
Min.
Unit
Max.
VIH
HIGH Level Input
Voltage
1.65 to 1.95
0.75VCC
0.75VCC
2.30 to 5.50
0.70VCC
0.70VCC
VIL
LOW Level Input
Voltage
1.65 to 1.95
0.25VCC
0.25VCC
2.30 to 5.50
0.30VCC
0.30VCC
1.65
1.55
1.65
1.55
2.30
VIN=VIH,
IOH=-100µA
2.20
2.30
2.20
2.90
3.00
2.90
4.40
4.50
4.40
1.65
IOH=-4mA
1.29
1.52
1.29
2.30
IOH=-8mA
1.90
2.15
1.90
3.00
IOH=-16mA
2.40
2.80
2.40
3.00
IOH=-24mA
2.30
3.68
2.30
4.50
IOH=-32mA
3.80
4.20
3.80
3.00
4.50
VOH
HIGH Level
Output Voltage
1.65
2.30
3.00
VIN=VIL
IOL=100µA
4.50
VOL
LOW Level
Output Voltage
IIN
Input Leakage
Current
IOZ
V
V
V
0.00
0.10
0.10
0.00
0.10
0.10
0.00
0.10
0.10
0.00
0.10
0.10
1.65
IOL=4mA
0.08
0.24
0.24
2.30
IOL=8mA
0.10
0.30
0.30
3.00
IOL=16mA
0.15
0.40
0.40
3.00
IOL=24mA
0.22
0.55
0.55
4.50
IOL=32mA
0.22
0.55
0.55
V
0 to 5.5
VIN=5.5V, GND
±0.1
±1.0
µA
3-STATE Output
Leakage
1.65 to 5.50
VIN=VIL or VOH
0<VOUT 5.5V
±0.5
±5.0
µA
IOFF
Power Off
Leakage Current
0
1
10
µA
ICC
Quiescent
Supply Current
1
10
µA
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
VIN or VOUT=5.5V
1.65 to 5.50 VIN=5.5V, GND
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
DC Electrical Characteristics
www.fairchildsemi.com
4
Symbol
Parameter
VCC
Condition
Min.
Min.
Max.
2.0
6.3
10.1
2.0
10.5
1.0
3.6
5.7
1.0
6.0
0.8
2.7
4.0
0.8
4.3
0.5
2.0
3.1
0.5
3.3
3.30 ± 0.30 CL=50pF,
RD=500
5.00 ± 0.50 V =OPEN
1
1.2
3.4
4.9
1.2
5.4
2.5
3.9
0.8
4.2
Output Enable
Time
tPZL, tPHZ
Output Disable
Time
CIN
Typ. Max.
2.50 ± 0.20 CL=15pF,
RD=1M
3.30 ± 0.30 V =OPEN
1
Propagation Delay
5.00 ± 0.50
A to Y0 or Y1
1.80 ± 0.15
tPLH, tPHL
TA=-40 to
+85°C
TA=+25°C
0.8
1.80 ± 0.15 CL=50pF,
2.50 ± 0.20 RD,RU=500
V1=GND for
3.30 ± 0.30 tPZH
V1=VIN for
5.00 ± 0.50 tPZL
VIN=2 x VCC
1.80 ± 0.15 CL=50pF,
2.50 ± 0.20 RD,RU=500
V1=GND for
3.30 ± 0.30 tPHZ
V1=VIN for
5.00 ± 0.50 tPLZ
VIN=2 x VCC
3.0
6.9
12.0
3.0
12.5
1.8
4.2
6.8
1.8
7.3
1.2
3.2
5.0
1.2
5.5
0.8
2.5
4.0
0.8
4.3
2.5
6.0
10.0
2.5
10.5
1.5
4.0
6.8
1.5
7.1
0.8
2.9
4.9
0.8
5.3
0.3
1.8
3.5
0.3
3.7
Unit Figure
ns
Figure 4
Figure 6
ns
Figure 4
Figure 6
ns
Figure 4
Figure 6
Input Capacitance
0
2.5
pF
COUT
Output
Capacitance
0
4.0
pF
CPD
Power Dissipation
Capacitance(4)
3.30
16.0
5.00
19.5
pF
Figure 5
Note:
4. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating
current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic
operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic).
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
AC Electrical Characteristics
www.fairchildsemi.com
5
Notes:
5. CL includes load and stray capacitance.
6. Input PRR = 1.0MHz, tW = 500ns.
Figure 5. ICCD Test Circuit
Figure 4. AC Test Circuit
Figure 6. AC Waveforms
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
AC Loadings and Waveforms
www.fairchildsemi.com
6
SYMM
C
L
2.00±0.20
0.65
A
0.50 MIN
6
4
B
PIN ONE
1.25±0.10
1
1.90
3
0.30
0.15
(0.25)
0.40 MIN
0.10
0.65
A B
1.30
LAND PATTERN RECOMMENDATION
1.30
1.00
0.80
SEE DETAIL A
1.10
0.80
0.10 C
0.10
0.00
C
2.10±0.30
SEATING
PLANE
NOTES: UNLESS OTHERWISE SPECIFIED
GAGE
PLANE
(R0.10)
0.25
0.10
0.20
A) THIS PACKAGE CONFORMS TO EIAJ
SC-88, 1996.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE BURRS
OR MOLD FLASH.
D) DRAWING FILENAME: MKT-MAA06AREV6
30°
0°
0.46
0.26
DETAIL A
SCALE: 60X
Figure 7. 6-Lead, SC70, EIAJ SC88, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
Physical Dimensions
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf.
Package Designator
P6X
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
7
2X
0.05 C
1.45
B
2X
(1)
0.05 C
(0.254)
(0.49)
5X
1.00
(0.75)
PIN 1 IDENTIFIER
5
(0.52)
1X
A
TOP VIEW
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
1.0
DETAIL A
0.10
0.05
0.45
0.35
0.10
0.00 6X
0.25
0.15 6X
C B A
C
0.40
0.30
0.35 5X
0.25
0.40 5X
0.30
0.5
(0.05)
6X
BOTTOM VIEW
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
(0.13)
4X
Notes:
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
4. FILENAME AND REVISION: MAC06AREV4
5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY
OTHER LINE IN THE MARK CODE LAYOUT.
Figure 8. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
Physical Dimensions
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
L6X
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
8
0.89
0.35
0.05 C
1.00
2X
B
A
5X 0.40
PIN 1
MIN 250uM
0.66
1.00
1X 0.45
6X 0.19
0.05 C
TOP VIEW
RECOMMENDED LAND PATTERN
FOR SPACE CONSTRAINED PCB
2X
0.90
0.05 C
0.35
0.55MAX
C
5X 0.52
SIDE VIEW
0.73
(0.08) 4X
1
DETAIL A
2
1X 0.57
0.09
0.19 6X
3
0.20 6X
ALTERNATIVE LAND PATTERN
FOR UNIVERSAL APPLICATION
(0.05) 6X
5X 0.35
0.25
6
5
4
0.35
0.60
(0.08)
4X
0.10
.05 C
C B A
0.40
0.30
BOTTOM VIEW
NOTES:
A. COMPLIES TO JEDEC MO-252 STANDARD
B. DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994
D. LANDPATTERN RECOMMENDATION IS BASED ON FSC
DESIGN.
E. DRAWING FILENAME AND REVISION: MGF06AREV3
Figure 9.
0.075X45°
CHAMFER
DETAIL A
PIN 1 LEAD SCALE: 2X
6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
Physical Dimensions
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.
Package Designator
FHX
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
Tape Section
Cavity Number
Cavity Status Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
9
NC7SZ18 — TinyLogic® UHS 1-of-2 Non-Inverting De-multiplexer with 3-STATE Deselected Output
10
www.fairchildsemi.com
© 1999 Fairchild Semiconductor Corporation
NC7SZ18 • Rev. 1.0.2
Similar pages