MACOM JWD-172-3 Jwd/jws series reed relay Datasheet

Signal Relays
Potter & Brumfield
JWD/JWS Series Reed Relays
n
n
n
n
n
JWD has dual in-line package (DIP) configuration (14-pin DIP)
JWS has single in-line package (SIP) configuration
Low cost, dry reed reliability with various contact arrangements
Wave solderable and immersion cleanable molded epoxy package
Optional coil suppression diode
Typical applications
Telecommunications, measurement and control, automated test equipment,
security systems, medical equipment.
UC
Approvals
Coil Data
UL E29244, CSA LR81479
Technical data of approved types on request
Contact Data
Contact arrangement
JWD and JWS
1 form A (NO) contact
JWD only
1 form B (NC), 1 form C (CO),
2 form A (NO)
Rated voltage
1 form A, 1 form B and 2 form A
20VDC, 500mA
1 form C (CO)
10 VDC, 500mA and 10VDC, 10mA
Max. switching voltage
1 form A, 1 form B and 2 form A
100VDC
1 form C (CO)
28VDC
Rated current
1 form A, 1 form B and 2 form A
500mA, 20VDC
1 form C (CO)
500mA, 10VDC
Limiting making current
500mA
Limiting breaking current
500mA
Switching power
form A (NO) and form B (NC) 10W
form C (CO)
3W
Contact material
Ruthenium
Min. recommended contact load
10mV, 10mA
Minimum switching voltage
10mV
Initial contact resistance 200mΩ max. at 10mA, 6VDC
Frequency of operation
100Hz
Operate/release time max., incl. bounce
form A (NO) and form B (NC)
1.5/0.5ms
form C (CO)
1.5/3.0ms
Electrical endurance
form A (NO) and form B (NC), resistive load, +25°C
20VDC, 500mA
1x106 ops.
20VDC, 250mA
20x106 ops.
5VDC, 1mA
100x106 ops.
form C (CO) contact, resistive load, +25°C
10VDC, 500mA
1x106 ops.
10VDC, 250mA
20x106 ops.
5VDC, 1mA
100x106 ops.
Contact ratings
1 form A, 1 form B and 2 form A
500mA, 20VDC
1 form C (CO) 500mA, 10VDC
Mechanical endurance
100x106 operations
07-2012, Rev. 0712
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Coil voltage range
Min./Max. energization duration
Max. coil temperature
Thermal resistance
Coil insulation system according UL
5 to 24VDC
continuous
105º C
approximately 100ºC/W
class A
Insulation Data
Initial dielectric strength
between open contacts
form A (NO) and form B (NC)
form C (CO)
between contact and coil
between adjacent contacts
2 form A (NO) of JWD only
Initial insulation resistance
between insulated elements
Capacitance between open contacts
250VDC,
175VDC
500VDC
500VDC
1010Ω at 100VDC
typ. 0.5pF
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-35ºC to +85ºC
Category of environmental protection
IEC 61810
RTIII -wash tight
Vibration resistance (functional)
20g, 10 to 2000 Hz
Shock resistance (functional), 3 planes, half sine pulse, 8ms
form A (NO)
100g
form B (NC) and form C (CO)
50g
Terminal type
PCB-THT
Mounting position
any
Weight approximately 2.3g ( 0.08 oz.)
Resistance to soldering heat THT
IEC 60068-2-20, wave solder
max. 260ºC/10s
Ultrasonic cleaning
no
Conformal coating
yes
Packaging/unit
tray/50 pcs.,
bundle/250 pcs.,
box/500 pcs.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
Signal Relays
Potter & Brumfield
JWD/JWS Series Reed Relays (Continued)
Dimensions
Terminal assignment
TOP view on component side of PCB
Dia. 1
Dia. 2
Dia. 3
Dia. 4
7 6
+2 1
7 6
+2 1
7 6
+2 1
7 6
8 9
13 14
8 9
13 14
8 9
13 14
8 9
7 6
+2 1
JWD Series
+2 1
MAGNET
7
13 14
.130 ± .015
(3.3 ± 0.4)
1 2
13 14
8 9
6 7
21
.100 TYP.
(2.54)
8 9
.300 MAX.
(7.62)
.770 MAX.
(19.56)
1314
1
+3
5
.315 (8.0) MAX.
WITH TERMINALS
VERTICAL
.020 TYP.
(.51)
.600
(15.24)
4° MAX.
TYP.
7
Dia. 5
Dia. 6
Dia. 7
Note: Terminal numbers are for reference only and do not appear on relays.
.012 TYP.
(.3)
JWS Series
.260 MAX.
(6.6)
.800 MAX.
(20.32)
.307 MAX.
(7.8)
1
Note: Magnetic shielding may be required between relays when they are
placed in very close proximity to one another.
Product code
Contacts
Max.
Diode
rating
07-2012, Rev. 0712
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
JWD-107-1
1 form A,
10W
JWD-107-5
1 NO contact
JWD-107-3
JWD-107-7
JWD-171-5
JWD-171-10
JWD-171-21
2 form A,
JWD-171-25
2 NO contacts
JWD-171-23
JWD-171-27
JWD-171-24
JWD-171-28
JWD-171-12
1 form B,
JWD-171-17
1 NCO contact
JWD-171-14
JWD-171-19
JWD-171-15
JWD-171-20
JWD-172-1
1 form C,
3W
JWD-172-5
1 CO contact
JWD-172-3
JWD-172-7
JWD-172-4
JWD-172-8
JWD-172-155
JWD-172-159
JWD-172-161
JWD-172-158
JWD-172-162
JWS-117-1
1 form A,
10W
JWS-117-6
1 NO contact
JWS-117-3
JWS-117-8
JWS-117-18
JWS-117-5
1) Coil resistance ±10%.
2
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
No
Yes
No
Yes
No
Yes
Yes
No
3
7
500ohm
500ohm
1200ohm
1200ohm
2150ohm
2150ohm
200ohm
200ohm
500ohm
500ohm
2200ohm
2200ohm
500ohm
500ohm
1200ohm
1200ohm
2200ohm
2200ohm
200ohm
200ohm
500ohm
500ohm
2200ohm
2200ohm
200ohm
200ohm
1000ohm
2150ohm
2150ohm
500ohm
500ohm
530ohm
530ohm
1850ohm
2150ohm
3.8VDC
3.8VDC
9.6VDC
9.6VDC
19.2VDC
19.2VDC
3.8VDC
3.8VDC
9.6VDC
9.6VDC
19.2VDC
19.2VDC
3.8VDC
3.8VDC
9.6VDC
9.6VDC
19.2VDC
19.2VDC
3.8VDC
3.8VDC
9.6VDC
9.6VDC
19.2VDC
19.2VDC
3.8VDC
3.8VDC
9.6VDC
19.2VDC
19.2VDC
3.8VDC
3.8VDC
9.6VDC
9.6VDC
9.6VDC
19.2VDC
Coil
power
50/72mW
50/72mW
120mW
120mW
268mW
268mW
125/180mW
125/180mW
288mW
288mW
262mW
262mW
50/72mW
50/72mW
120mW
120mW
262mW
262mW
125/180mW
125/180mW
288mW
288mW
262mW
262mW
125/180mW
125/180mW
144mW
268mW
268mW
50mW
50mW
272mW
272mW
78mW
268mW
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
.010 TYP.
(.25)
.125 ± .010
(3.18 ± .254)
.200 TYP.
(5.08)
Coil
Coil
Operate
voltage resistance1) voltage
5/6VDC
5/6VDC
12VDC
12VDC
24VDC
24VDC
5/6VDC
5/6VDC
12VDC
12VDC
24VDC
24VDC
5/6VDC
5/6VDC
12VDC
12VDC
24VDC
24VDC
5/6VDC
5/6VDC
12VDC
12VDC
24VDC
24VDC
5/6VDC
5/6VDC
12VDC
24VDC
24VDC
5VDC
5VDC
12VDC
12VDC
12VDC
24VDC
5
.018 TYP.
(.46)
.020 TYP.
(.51)
Wiring
diagram
1
1
1
1
2
2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
7
7
7
7
7
7
Part number
1393771-3
1393771-5
1393771-4
1393771-6
2-1393771-0
1393771-7
1-1393771-4
1-1393771-7
1-1393771-5
1-1393771-8
1-1393771-6
1-1393771-9
1393771-8
1-1393771-1
1393771-9
1-1393771-2
1-1393771-0
1-1393771-3
2-1393771-1
2-1393771-9
2-1393771-7
3-1393771-0
2-1393771-8
3-1393771-1
2-1393771-2
2-1393771-4
2-1393771-5
2-1393771-3
2-1393771-6
3-1393771-2
3-1393771-8
3-1393771-4
3-1393771-6
3-1393771-3
3-1393771-5
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
Similar pages