CHEMI-CON EKLM251 15mm height snap-ins, 105â Datasheet

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
KLM
15mm height snap-ins, 105℃
KLM
Series
・15mm height snap-ins
・Endurance with ripple current : 2,000 hours at 105℃
・Non solvent resistant type
・RoHS Compliant
Low profile
KMQ P215
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
-25 to +105℃
160 to 400Vdc
±20% (M)
I≦3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
160 to 400V
0.20
tanδ (Max.)
Rated voltage (Vdc)
160 to 400V
Z (-25℃)/Z (+20℃)
4
1
2
3
4
E KLM
Negative mark
5
6
7
8
9
10
VS N
PC board pin-out
φD+1max.
10
2-φ2
4.0±0.5
L±2
◆STANDARD RATINGS
160
180
200
12
13
14
M
15
16
17
18
S
Please refer to "Product code guide (snap-in type)"
Cap
(µF)
Rated ripple
Case size
current
tanδ
(Arms/
φD×L(mm)
105℃,120Hz)
150
180
220
270
330
390
120
150
180
220
270
330
390
120
150
180
22×15
25.4×15
25.4×15
30×15
30×15
35×15
22×15
25.4×15
25.4×15
30×15
30×15
35×15
35×15
22×15
25.4×15
30×15
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
11
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470, 100µF:101)
Dummy terminal code
Terminal code
Voltage code (ex. 160V:161,400V:401)
Series code
Category
The standard design has no plastic disc.
WV
(Vdc)
(at 20℃, 120Hz)
◆PART NUMBERING SYSTEM
Code : VS
Sleeve (PET : Brown)
Vent
(at 20℃ after 5 minutes)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃.
≦±20% of the initial value
Capacitance change
≦200% of the initial specified value
D.F. (tanδ)
≦The initial specified value
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
≦±15% of the initial value
Capacitance change
≦150% of the initial specified value
D.F. (tanδ)
≦The initial specified value
Leakage current
◆DIMENSIONS [mm]
●Terminal
(at 20℃, 120Hz)
0.68
0.79
0.88
0.96
1.06
1.20
0.61
0.73
0.79
0.86
0.96
1.10
1.17
0.61
0.73
0.79
Part No.
EKLM161VSN151MP15S
EKLM161VSN181MQ15S
EKLM161VSN221MQ15S
EKLM161VSN271MR15S
EKLM161VSN331MR15S
EKLM161VSN391MA15S
EKLM181VSN121MP15S
EKLM181VSN151MQ15S
EKLM181VSN181MQ15S
EKLM181VSN221MR15S
EKLM181VSN271MR15S
EKLM181VSN331MA15S
EKLM181VSN391MA15S
EKLM201VSN121MP15S
EKLM201VSN151MQ15S
EKLM201VSN181MR15S
WV
(Vdc)
200
250
400
Cap
(µF)
Case size
φD×L(mm)
tanδ
Rated ripple
current
(Arms/
105℃,120Hz)
220
270
330
82
100
120
150
180
220
39
47
56
68
82
100
120
30×15
35×15
35×15
22×15
25.4×15
25.4×15
30×15
30×15
35×15
22×15
25.4×15
25.4×15
30×15
30×15
35×15
35×15
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.90
1.00
1.07
0.50
0.59
0.65
0.71
0.79
0.90
0.35
0.40
0.44
0.46
0.51
0.56
0.62
Part No.
EKLM201VSN221MR15S
EKLM201VSN271MA15S
EKLM201VSN331MA15S
EKLM251VSN820MP15S
EKLM251VSN101MQ15S
EKLM251VSN121MQ15S
EKLM251VSN151MR15S
EKLM251VSN181MR15S
EKLM251VSN221MA15S
EKLM401VSN390MP15S
EKLM401VSN470MQ15S
EKLM401VSN560MQ15S
EKLM401VSN680MR15S
EKLM401VSN820MR15S
EKLM401VSN101MA15S
EKLM401VSN121MA15S
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency
Multipliers
Frequency (Hz)
160 to 250Vdc
400Vdc
50
0.81
0.77
120
1.00
1.00
300
1.17
1.16
1k
1.32
1.30
10k
1.45
1.41
50k
1.50
1.43
The endurance of capacitors is reduced with internal heating produced
by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple
current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
240
CAT. No. E1001N
Similar pages