Surface Mount JPS-2-1N+ JPS-2-1N Power Splitter/Combiner 2 Way-0° 50Ω 350 to 550 MHz Maximum Ratings Operating Temperature Features -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) Internal Dissipation 1W max. 0.125W max. Permanent damage may occur if any of these limits are exceeded. SUM PORT 1 PORT 1 3 PORT 2 4 GROUND 6 2,5 Outline Drawing Electrical Specifications FREQ. RANGE (MHz) ISOLATION (dB) K .065 1.65 L .300 7.62 0.3 0.25 0.5 Typical Performance Data G .100 2.54 Total Loss1 (dB) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-1 S-2 350.00 360.00 370.00 390.00 400.00 3.21 3.21 3.23 3.26 3.26 3.19 3.19 3.21 3.24 3.23 0.02 0.03 0.02 0.03 0.03 32.34 33.09 33.93 35.99 37.37 0.55 0.55 0.56 0.58 0.60 1.06 1.06 1.05 1.03 1.02 1.05 1.05 1.04 1.03 1.03 1.07 1.06 1.06 1.04 1.04 420.00 430.00 445.00 460.00 475.00 3.23 3.26 3.31 3.33 3.33 3.20 3.21 3.26 3.26 3.25 0.03 0.05 0.05 0.07 0.08 40.88 43.19 46.23 43.60 39.28 0.54 0.56 0.54 0.64 0.57 1.01 1.02 1.04 1.06 1.08 1.03 1.03 1.04 1.05 1.07 1.04 1.04 1.04 1.05 1.06 490.00 505.00 525.00 535.00 550.00 3.33 3.36 3.39 3.42 3.48 3.25 3.27 3.29 3.31 3.36 0.07 0.09 0.10 0.10 0.12 35.94 33.20 30.32 29.06 27.39 0.51 0.60 0.51 0.49 0.50 1.10 1.13 1.17 1.19 1.22 1.08 1.09 1.12 1.13 1.15 1.07 1.08 1.10 1.11 1.13 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.45 Demo Board MCL P/N: TB-48+ Suggested PCB Layout (PL-035) Max. 3.0 Typ. Max. 20 JPS-2-1N TOTAL LOSS 3.6 S-1(dB) 3.5 S-2(dB) 45 3.4 3.3 3.2 3.1 3.0 350 JPS-2-1N ISOLATION 50 ISOLATION (dB) J .065 1.65 F .055 1.40 Max. Min 30 TOTAL LOSS (dB) H .047 1.19 E .225 5.72 AMPLITUDE UNBALANCE (dB) Typ. Outline Dimensions ( inch mm ) D .100 2.54 PHASE UNBALANCE (Degrees) fL-fU Suggested Layout, Tolerance to be within ±.002 C --- INSERTION LOSS (dB) ABOVE 3.0 dB 350-550 Frequency (MHz) B .310 7.87 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications PCB Land Pattern A .280 7.11 CASE STYLE: BH292 • VHF/UHF • signal processing • instrumentation Pin Connections NOT USED • low insertion loss, 0.25 dB typ. • excellent isolation, 30 dB typ. • excellent VSWR, 1.15:1 typ. • J-leads for excellent solderability and strain relief 40 35 30 25 390 430 470 510 550 FREQUENCY (MHz) 20 350 390 430 470 510 550 FREQUENCY (MHz) JPS-2-1N VSWR 1.4 #S-VSWR #1-VSWR #2-VSWR electrical schematic VSWR 1.3 1.2 1.1 1.0 350 390 430 470 510 550 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. G M151107 JPS-2-1N ED-4685 WZ/TD/CP/AM 150817 Page 1 of 1