Willow D41F-1Z-C4-4 Interface relay Datasheet

D41F series
interface relays
• miniature slim DIN rail power relay
• up to 6A /250V AC rating
• LED indication
• Screw or spring clamp terminals
• Optional accessories
• RoHS Compliant
* Standard is light gray for socket, other colours to special order only.
E305752
Contacts
Contact number & arrangement
SPDT ( 1 C/O)
Contact material
AgSnO2
Max. switching voltage
AC/DC 440VAC / 125VDC
Min. switching current / voltage
Rated load
5mA / 5VDC
Resistive 6A 250VAC/30VDC
Max. switching power
1500VA / 180W
Max. inrush current
15A for 2.5ms
Initial resistance
100mΩ, max. at 1A/6VDC
Coil (Input)
Rated voltage
AC or DC 12 ~ 24V, 48 ~ 60V, 110 ~ 125V, 220 ~ 240V AC/DC
DC only 6 ~ 24V DC
Operating range of supply voltage
See coil table 1
Insulation
Insulation resistance
≤ 1000MΩ at 500VDC, 50%RH
Dielectric strength
coil to contact 4000Vrms, 1min
contact to contact 1000Vrms, 1min
General Data
Operating time (typical)
mS ≤ 7ms
Release time (typical)
mS ≤ 15ms
Electrical Life
ops ≥ 3.0 x 104 (NO) / ≥ 1.0 x 104 (NC) at full rated load, @ 85°C
Mechanical life
ops ≥ 1 x 107
Dimensions
L x W x H 88.3 x 6.3 x 70.9 (refer to dimension drawings, Fig 1, for details)
Weight
approx 28g (socket including relay)
Ambient temperature
storage -40 to 85°C
operating
6 ~ 12VDC, 12 ~ 24V AC/DC, 48 ~ 60V AC/DC: -40 to 70°C
110 ~ 125V, 220 ~ 230V AC/DC: -40 to 55°C
Humidity
5% to 85% RH
Shock resistance
49ms2 (functional) / 980ms2 (destructive)
Vibration resistance
10...55Hz, 1mm DA
Page 1 of 3
Ref: D41F 102115JHM
www.aecsensors.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
D41F series
interface relays
Coil data
Table 1
Coil Voltage Code
Nominal Control
Voltage
Relay Coil Voltage
1
12 ~ 24VAC/DC
12VDC
2
48 ~ 60VAC/DC
48VDC
3
110 ~ 125VAC/DC
60VDC
4
220 ~ 230VAC/DC
60VDC
5
6 ~ 24VDC
5VDC
Input Polarity
Screw Torque
(D41F-1Z-C2 only)
Stripped wire length
0.5Nm
7mm
None
A1 + / A2 -
Operating relays below or above the nominal voltage may prove detrimental to performance.
Ordering codes
Table 2
Relay & Socket Code
D
Movable ejector:
Easy replacement of relay
4
1
Contact
F
-
1
Z
-
Contact Style
1Z
-
Coil code
Socket style
-
See Table 1
SPDT (1 Form Z)
Socket style
C2
-
Screw terminals
C4
-
Spring clamp terminals
Green LED Diode indicates
operate status of relay
Overall dimensions
58.2
79.7
Fig. 1
35
6.1
101.6
Page 2 of 3
Ref: D41F 102115JHM
www.aecsensors.com
Dimensions in mm
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
D41F series
interface relays - accessories
D41F-AR Adaptor
Fig.2
Technical data
Rated current (per signal path)
1A
Minimum required supply power
3W
Nominal voltage (Un)
24VDC
Operating range
(0.8~1.1)Un
Control logic
Positive switching (to A)
Power supply status indication
Green LED
Ambient temperature range
-40°C ~ 70°C
Terminals for 24V control logic
Type of connector
14 pole, according to IEC 60603-13
Terminals for 24V Power supply
Wire strip length
9.5mm
Screw torque
0.5Nm
Max. wire size
solid wire
stranded wire
1 x 4/2 x 1.5mm2
1 x 12/2 x 16AWG
1 x 2.5/2 x 1.5mm2
1 x 14/2 x 16AWG
Fig. 3
D41F-J-Blue / Red / Black Jumper
Ordering Code: D41F-J - Red or D41F-J- Blue or D41F-J-Black
Fig. 4
D41F-S Separator
D41F-M White Marker Tab
Page 3 of 3
Ref: D41F 102115JHM
D41F-M1 White Marker Tab (bulk for engraving)
Fig. 5
American Electronic Components Inc., 1101 Lafayette St, Elkhart, Indiana IN46516
www.aecsensors.com
Sales Department Tel: (888) 847-6552
Specifications are subject to change without notice. E&OE.
Similar pages