MLX90242 Linear Hall Effect Sensor Features and Benefits Quad Switched Hall Plate / Chopper Stabilized Amplifier Ratiometric Output for A/D Interface Low Quiescent Voltage Thermal Drift Small Plastic Packages (TSOT, TO-92) RoHS compliant TSOT package Applications Linear Position Sensing Rotary Position Sensing Current Sensing Ordering Code Product Code MLX90242 MLX90242 MLX90242 MLX90242 MLX90242 MLX90242 Temperature Code L L L E E E Legend: Temperature Code: Package Code: Option Code: Packing Form: Ordering example: 3901090242 Rev. 027 Package Code UA UA UC SE SE UC Option Code GAA-000 GAA-000 GAA-000 GAA-000 GDA-000 GAA-000 Packing Form Code BU RE WB RE RE WB L for Temperature Range -40°C to 150°C E for Temperature Range -40°C to 85°C SE for TSOT, UA for TO-92, UC for Die on wafer AAA-xxx: Die version xxx-000: Standard version RE for Reel BU for Bulk WB for Waferbox MLX90242LUA-GAA-000-RE Page 1 of 10 Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 1. Functional Diagram 2. Description VDD Output The MLX90242 is a CMOS Linear Hall Effect sensor IC. It possesses active error correction circuitry which virtually eliminates the offset errors normally associated with analog Hall Effect devices. Chopper Package Pin1 Pin2 Pin 3 Slope TSOT VDD Out VSS Positive UA VDD VSS Out Negative 3901090242 The ratiometric output voltage is proportional to the supply voltage. When using the supply voltage as a reference for an A/D converter, fluctuations of +10% in supply voltage will not affect accuracy. For a positive slope, the voltage at the output will increase as a South magnetic field is applied to the branded face of the MLX90242. Conversely, the voltage output will decrease in the presence of a North magnetic field. For a negative slope, the voltage at the output will increase as a North magnetic field is applied to the branded face of the MLX90242. Conversely, the voltage output will decrease in the presence of a South magnetic field. Page 2-2 of 10 Data Sheet MLX90242 Linear Hall Effect Sensor TABLE OF CONTENTS FEATURES AND BENEFITS ....................................................................................................................... 1 APPLICATIONS ............................................................................................................................................ 1 1. FUNCTIONAL DIAGRAM ................................................................................................................... 1-2 2. DESCRIPTION .................................................................................................................................... 2-2 3. GLOSSARY OF TERMS ....................................................................................................................... 4 4. ABSOLUTE MAXIMUM RATINGS ....................................................................................................... 4 5. MLX90242 ELECTRICAL SPECIFICATIONS ...................................................................................... 5 6. MLX90242 MAGNETIC SPECIFICATIONS .......................................................................................... 5 7. APPLICATIONS INFORMATION .......................................................................................................... 6 8. STANDARD INFORMATION REGARDING MANUFACTURABILITY OF MELEXIS PRODUCTS WITH DIFFERENT SOLDERING PROCESSES .......................................................................................... 7 9. ESD PRECAUTIONS ............................................................................................................................. 7 10. PACKAGE INFORMATION ................................................................................................................... 8 10.1. 10.2. UA PACKAGE .............................................................................................................................................. 8 TSOT PACKAGE (ROHS COMPLIANT) ......................................................................................................... 9 11. DISCLAIMER ....................................................................................................................................... 10 3901090242 Rev. 027 Page 3 of 10 Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 3. Glossary of Terms - Gauss, Tesla: Two units to quantify a magnetic flux density. Conversion: 1 mT = 10 Gauss - Voq: Quiescent output voltage. Output voltage for B = 0. 4. Absolute Maximum Ratings Supply Voltage (Over Voltage), VDD 7.0 V Output Current Short to Vdd 5 mA Output Current Short to Vss 0.5 mA Output Pin Short to Vss Pin Infinite Output Over Voltage 8V Operating Temperature Range, TA -40°C to 150°C Storage Temperature Range, TS -55°C to 150°C Maximun Junction Temp, TJ 170°C Magnetic Flux Density Infinite Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolutemaximum-rated conditions for extended periods may affect device reliability. 3901090242 Rev. 027 Page 4 of 10 Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 5. MLX90242 Electrical Specifications DC Operating Parameters. L: TA = -40 to 150°C, E: TA = -40 to 85°C VDD = 5.0V (Unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Units Supply Voltage VDD Operating 4.5 5.0 5.5 V Supply Current IDD B = 0, VDD = 5V, IOUT = 0 1.8 2.5 4.5 mA Output Current IOUT VDD = 5V Pull-up = 5 kΩ, Pull-down = 50 kΩ -1.0 - 0.1 mA Quiescent Output Voltage VOQ B = 0, TA = 25°C 2.4 2.5 2.6 V Output Voltage VOH VDD = 5V, IOUT = -1.0 mA 4.75 Output Voltage VOL VDD = 5V, IOUT = 0.1 mA Response Time tr Vdd=5V,Vout from Voq to VOH/VOL without load V 0.25 V 400 800 µS 5 10 mV Noise (RMS) Output Resistance ROUT Linearity Error Le 20 Ω 0.5 %Vdd 6. MLX90242 Magnetic Specifications VDD = 5.0V (Unless otherwise specified) Parameter MLX90242 LUA-GAA-000 Symbol Min Thermal Voq Drift (1) (mV) Sensitivity, TA = 25° C (mV/mT) TC of Sensitivity (ppm/°C) Τ Typ MLX90242 ESE-GDA-000 Max ∆ VOQ -25 S 33.2 39.0 44.9 TCS 430 680 930 Min 25 Typ Max MLX90242 ESE-GAA-000 Min ±25 (2) 11.5 15 680 (2) Typ Max ±25 (2) 17.3 33.2 39.0 ) 680 (2) 44.9 (1) B = 0 Gauss (2) For TSOT package, TC of Sensitivity and Thermal Voq Drift are not fully tested and therefore cannot be specified. Characterization and statistic data can be provided by Melexis upon request. 3901090242 Rev. 027 Page 5 of 10 Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 7. Applications Information C1 and C2 values can be trimmed to satisfied EMC requirements according to the environment (PCB, connectors,...). The output rise time is affected for large capacitor C2, depending of the couple R1;C2. Recommended Wiring VDD 3 MLX 90242 C1 = 10nF 1 2 V OUT R1 = 10 k C2 = 2.5nF 3901090242 Rev. 027 Page 6 of 10 Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 8. Standard information regarding manufacturability of Melexis products with different soldering processes Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity level according to following test methods: Reflow Soldering SMD’s (Surface Mount Devices) • • IPC/JEDEC J-STD-020 Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices (classification reflow profiles according to table 5-2) EIA/JEDEC JESD22-A113 Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing (reflow profiles according to table 2) Wave Soldering SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices) • • EN60749-20 Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat EIA/JEDEC JESD22-B106 and EN60749-15 Resistance to soldering temperature for through-hole mounted devices Iron Soldering THD’s (Through Hole Devices) • EN60749-15 Resistance to soldering temperature for through-hole mounted devices Solderability SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices) • EIA/JEDEC JESD22-B102 and EN60749-21 Solderability For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature, temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed upon with Melexis. The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of adhesive strength between device and board. Melexis is contributing to global environmental conservation by promoting lead free solutions. For more information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of the use of certain Hazardous Substances) please visit the quality page on our website: http://www.melexis.com/quality.aspx 9. ESD Precautions Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures whenever handling semiconductor products. 3901090242 Rev. 027 Page 7 of 10 Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 10. Package Information 10.1. UA Package 45o Typical 1.60 1.40 UA Package Dimensions UA Hall Plate / Chip Location 1.95 +/- 0.15 0.84 0.63 Max 5 o Typ 5 o 0.45 0.41 Hall Plate dimension: 0.150x0.150 4.30 3.90 42GA 2053 * 3.20 2.80 1.52+/-0.15 2.64 2.34 Max 5o Marked Surface 0.48 0.43 1.75 1.55 0.7 Max Min. 9.0 All Dimensions in millimeters 0.38 Typical (see note 3) 0.20 0.00 1 2 3 0.41 0.35 0.41 0.35 1.30 1.24 PINOUT: Pin 1 Pin 2 Pin 3 3901090242 Rev. 027 Front side marking Part Number MLX90242 (2 digits) 2.57 2.51 VDD GND (Vss) Output NOTES: 1.) Controlling dimension: mm 2.) Leads must be free of flash and plating voids 3.) Leads must not arc toward the rear of package 4.) Package dimensions exclude molding flash 5.) Tolerance is 0.254mm unless otherwise specified Page 8 of 10 Die Version (2 digits) 42 Y GA WW 3 Last Lot Number Digit (1 digit) Week Date Code (2 digits) Year Date Code (1 digit) Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 10.2. TSOT Package (RoHS compliant) 1.10 MAX 2.75 BSC 1.60 BSC see note 2 SEATING PLANE +0.02 0.88 - 0.03 2 1.90 BSC 0.30 0.45 42XXX 1.417±0.15 0.889±0.15 0.95 BSC 2.90 BSC 3 see note 3 Hall plate location +0.025 0.075 - 0.050 0.275±0.06 1 0.50 BSC TOP VIEW WITH PLATING 0.10 R. MIN. BASE METAL 0.15 0.20 ~ 0.10 R. MIN. B’ B +/-0.10 0.40 see note 5 END VIEW SIDE VIEW 12° REF. TYP. 0.20 +/-4 4° TOP VIEW SEATING PLANE 0.575 REF. END VIEW 0.007 +0.023 0.35 +0.05 - 0.10 - 0.127 0.30 0.45 SECTION B-B’ see note 6 Notes: 1. All dimensions are in millimeters 2. Outermost plastic extreme width does not include mold flash or protrusions. Mold flash and protrusions shall not exceed 0.15mm per side. 3. Outermost plastic extreme length does not include mold flash or protrusions. Mold flash and protrusions shall not exceed 0.25mm per side. 4. The lead width dimension does not include dambar protrusion. Allowable dambar protrusion shall be 0.07mm total in excess of the lead width dimension at maximum material condition. 5. Dimension is the length of terminal for soldering to a substrate. 6. Dimension on SECTION B-B’ are apply to the flat section of the lead between 0.08mm and 0.15mm from the lead tip. 7. Formed lead shall be planar with respect to one another with 0.076mm at seating plane. Top Side Marking: 42XXX: 3 last digits of lotnumber (XXX) Bottom Side Marking: YYWW : Year (YY) - Week (WW) 3901090242 Rev. 027 Page 9 of 10 Data Sheet Feb/12 MLX90242 Linear Hall Effect Sensor 11. Disclaimer Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Melexis reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with Melexis for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by Melexis for each application. The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis’ rendering of technical or other services. © 2012 Melexis NV. All rights reserved. For the latest version of this document, go to our website at www.melexis.com Or for additional information contact Melexis Direct: Europe, Africa, Asia: Phone: +32 1367 0495 E-mail: [email protected] America: Phone: +1 248 306 5400 E-mail: [email protected] ISO/TS 16949 and ISO14001 Certified 3901090242 Rev. 027 Page 10 of 10 Data Sheet Feb/12