65W Constant Voltage + Constant Current LED Driver HVG-65 series IP65 IP67 ■ Features Wide input range 180 ~ 528VAC Constant Voltage + Constant Current mode output Metal housing with ClassⅠdesign Built-in active PFC function IP67 / IP65 rating for indoor or outdoor installations Function options: output adjustable via potentiometer; ■ Applications LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp LED greenhouse lighting 3 in 1 dimming (dim-to-off); Timer dimming Typical lifetime>50000 hours 5 years warranty ■ Description HVG-65 series is a 65W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HVG-65 operates from 180~528 VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -40℃ ~ +80℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVG-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding HVG - 65 - 15 A Function options Rated output voltage(12/15/20/24/30/36/42/48/54V) Rated wattage Series name Type A B D IP Level IP65 IP67 IP67 Function Io and Vo adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Built-in Smart timer dimming function by user request. Note In Stock In Stock By request File Name:HVG-65-SPEC 2016-10-25 HVG-65 65W Constant Voltage + Constant Current LED Driver series SPECIFICATION HVG-65-12 HVG-65-15 HVG-65-20 HVG-65-24 HVG-65-30 HVG-65-36 HVG-65-42 HVG-65-48 12V 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V RATED CURRENT 5A 4.3A 3.25A 2.71A 18 ~ 30V 2.17A 1.81A 1.55A 1.36A 1.21A RATED POWER 60W 64.5W 65W 65W 65.1W 65.2W 65.1W 65.3W 65.3W 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 300mVp-p 300mVp-p 300mVp-p 27 ~ 33V 33 ~ 40V 38 ~ 46V 43 ~ 53V 49 ~ 58V MODEL DC VOLTAGE RIPPLE & NOISE (max.) Note.2 120mVp-p Adjustable for A-Type only (via the built-in potentiometer) VOLTAGE ADJ. RANGE OUTPUT 10.8 ~ 13.5V 13.5 ~ 17V CURRENT ADJ. RANGE 1.95 ~ 3.25A 1.62 ~ 2.71A 1.3 ~ 2.17A ±2.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% 1.08 ~ 1.81A 0.93 ~ 1.55A 0.81 ~ 1.36A 0.72 ~ 1.21A ±1.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.5% ±1.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 500ms, 80ms /230VAC HOLD UP TIME (Typ.) 16ms / 347VAC ±0.5% ±0.5% ±0.5% 89.5% 90% 90% 47 ~ 53V 54 ~ 60V 59 ~ 65V 400ms, 80ms /347VAC, 480VAC 30ms / 480VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF≧0.98/230VAC, PF≧0.97/277VAC, PF≧0.97/347VAC, PF≧0.93/480VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20%(@ load≧60%/230VAC, 277VAC, 347VAC; @ load≧75%/480VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section) MAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE 86.5% 87.5% 89% 89.5% 89% 88.5% 0.22A / 347VAC 0.18A / 480VAC COLD START 25A(twidth=420μs measured at 50% Ipeak) at 480VAC; Per NEMA 410 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 480VAC <0.75mA / 480VAC 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 41 ~ 46V 28 ~ 34V 23 ~ 27V 34 ~ 38V 14.4 ~ 16.8V 18 ~ 21V Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. MAX. CASE TEMP. Tcase=-40 ~ +80℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION EMC 3 ~ 5A 180 ~ 528VAC 254VDC ~ 747VDC Note.5 (Please refer to "STATIC CHARACTERISTIC" section) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) SAFETY & 22 ~ 27V 2.58 ~ 4.3A EFFICIENCY (Typ.) PROTECTION 17 ~ 22V Adjustable for A-Type only (via the built-in potentiometer) VOLTAGE TOLERANCE Note.3 ±2.0% VOLTAGE RANGE INPUT HVG-65-54 Tcase=+80℃ 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 60℃) SAFETY STANDARDS 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-13, IP65 or IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (@ load≧60%) ; EN61000-3-3, FCC Part 15 Subpart B EMC EMISSION I/P-FG:2KVAC O/P-FG:1.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) 612.6K hrs min. Telcordia SR-332 (Bellcore) ; 208K hrs min. MIL-HDBK-217F (25℃) 189*61.5*36.8mm (L*W*H) DIMENSION 0.77Kg; 18pcs/14.9Kg/0.89CUFT PACKING 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25℃ of ambient temperature. EMC IMMUNITY MTBF OTHERS NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less. 9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com File Name:HVG-65-SPEC 2016-10-25 65W Constant Voltage + Constant Current LED Driver HVG-65 series Block Diagram PFC fosc : 65KHz PWM fosc : 65KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. PFC CONTROL PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. O.T.P. DRIVING METHODS OF LED MODULE ※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Should there be any compatibility issues, please contact MEAN WELL. (A) Constant Voltage area Vo(%) (B) Constant Current region 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HVG-65-SPEC 2016-10-25 65W Constant Voltage + Constant Current LED Driver HVG-65 series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) -V(Black) +V(Red) HVG-65 DIM+(Blue) DIM-(White) ※ 3 in 1 dimming function (for B-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 1 0 0μA (typ.) ◎ Applying additive 0 ~ 10VDC 100% 90% -V + + - - DIM+ + Output current (%) 80% +V 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage ◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% -V + + - - DIM+ Output current (%) 80% +V 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% ◎ Applying additive resistance: 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 90% -V + 80% + - - DIM+ Additive Resistance Output current (%) +V 70% 60% 50% 40% 30% DIM“DO NOT connect "DIM- to -V" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%. 2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:HVG-65-SPEC 2016-10-25 HVG-65 65W Constant Voltage + Constant Current LED Driver series 100 100 80 80 60 60 LOAD (%) LOAD (%) OUTPUT LOAD vs TEMPERATURE 40 20 -40 -25 -10 0 15 30 50 60 70 40 20 (HORIZONTAL) -40 -25 0 20 AMBIENT TEMPERATURE,Ta (℃) 45 55 65 75 80 (HORIZONTAL) Tcase (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 70℃ Constant Current Mode 100 1.00 0.98 0.96 0.94 0.92 0.90 0.88 0.86 0.84 0.82 0.80 0.78 90 80 LOAD (%) 70 PF 60 50 40 180 347 440 480 528 480V 347V 277V 230V 60% 70% INPUT VOLTAGE (V) 60Hz LOAD TOTAL HARMONIC DISTORTION (THD) 90% 100% (65W) EFFICIENCY vs LOAD HVG-65 series possess superior working efficiency that up to 90% can be reached in field applications. ※ 48V Model, Tcase at 70℃ ※ 48V Model, Tcase at 70℃ 20 100 18 95 14 12 480VAC 10 347VAC 8 277VAC 6 230VAC 4 2 EFFICIENCY(%) 16 THD(%) 80% 90 85 480V 80 347V 75 277V 230V 70 65 0 50% 60% 70% 80% LOAD 90% 100% 60 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HVG-65-SPEC 2016-10-25 65W Constant Voltage + Constant Current LED Driver HVG-65 series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 70 80 Tcase ( ℃ ) File Name:HVG-65-SPEC 2016-10-25 HVG-65 65W Constant Voltage + Constant Current LED Driver MECHANICAL SPECIFICATION Case No. 957 series Unit:mm ※ A-Type 189 165 12 7 9.6 32 300±20 61.5 300±20 tc 30.75 STW 18AWG×3C 7 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 82.5 Io ADJ. Vo ADJ. SVT 18AWG×2C -V(Black) +V(Red) ψ4.2×4PL : Max. Case Temperature 36.8 tc ※ B-Type 189 165 12 9.6 7 300±20 32 61.5 82.5 UL2517 18AWG×2C -V(Black) +V(Red) DIM+(Blue) DIM-(White) ψ4.2×4PL : Max. Case Temperature 36.8 tc tc 30.75 STW 18AWG×3C 7 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SVT 18AWG×2C 300±20 ※ D-Type 189 165 12 7 9.6 300±20 tc 30.75 32 STW 18AWG×3C 68 300±20 7 82.5 SVT 18AWG×2C -V(Black) +V(Red) ψ4.2×4PL tc : Max. Case Temperature 38.8 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) File Name:HVG-65-SPEC 2016-10-25 65W Constant Voltage + Constant Current LED Driver HVG-65 series WATERPROOF CONNECTION ※ Waterproof connector Waterproof connector can be assembled on the output cable of HVG-65 to operate in dry/wet/damp or outdoor environment. AC source HVG-65 I/P Size O/P Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. 5-PIN 5A/PIN M12-05 10A max. Size Pin Configuration (Female) M15 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp ※ Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 ψ25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVG-65 O/P Wires ◎ CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HVG-65-SPEC 2016-10-25