IRF IRS21962SPBF Dual channel high-side drivers with floating input Datasheet

Datasheet No – PD97383
March 17, 2009
IRS21962S
Dual channel high-side drivers with floating input
Features
•
•
•
•
•
•
Two independent high side output channels
CMOS Schmitt trigger inputs with pull down resistor
5V compatible logic level inputs
Immune to –Vs spike and tolerant to dVs/dt and
dVss/dt
Typical operating frequency 200kHz
RoHS compliant
Product Summary
VOFFSET
600 V
VOUT
10 V – 20 V
Io+ & I o- (typical)
0.5 A
tON & tOFF (typical)
90 ns
Package Type
16-Lead SOIC (narrow body)
Typical Connection Diagram
www.irf.com
© 2007 International Rectifier
IRS21962S
Table of Contents
Page
Description
3
Qualification Information
4
Absolute Maximum Ratings
5
Recommended Operating Conditions
5
Static Electrical Characteristics
6
Dynamic Electrical Characteristics
6
Functional Block Diagram
7
Input/Output Pin Equivalent Circuit Diagram
9
Lead Definitions
10
Lead Assignments
10
Package Details
11
Tape and Reel Details
12
Part Marking Information
13
Ordering Information
14
www.irf.com
© 2008 International Rectifier
2
IRS21962S
Description
The IRS21962 is a high voltage, high speed power MOSFET and IGBT driver with propagation delay matched
output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic
construction. The floating logic input is compatible with standard 5 V CMOS or LSTTL logic and can be
operated up to 600 volts above the COM ground. The output driver feature a 500 mA high pulse current buffer
stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel
power MOSFET or IGBT in the high side configuration, which operates up to 600 V above COM ground.
www.irf.com
© 2008 International Rectifier
3
IRS21962S
Qualification Information†
Industrial††
Comments: This family of ICs has passed JEDEC’s
Industrial qualification. IR’s Consumer qualification
level is granted by extension of the higher Industrial
level.
MSL2††† 260°C
SOIC16N
(per IPC/JEDEC J-STD-020)
Class B
(per JEDEC standard JESD22-A115)
Class 2
(per EIA/JEDEC standard EIA/JESD22-A114)
Class 1, Level A
(per JESD78)
Yes
Qualification Level
Moisture Sensitivity Level
Machine Model
ESD
Human Body Model
IC Latch-Up Test
RoHS Compliant
†
††
†††
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
Higher qualification ratings may be available should the user have such requirements. Please contact
your International Rectifier sales representative for further information.
Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
www.irf.com
© 2008 International Rectifier
4
IRS21962S
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All
voltage parameters are absolute voltages referenced to COM, which is the –200V DC bus provided
externally.
Symbol
Definition
Min
Max
Units
VCC
Low side supply voltage
-0.3
25
V
VDD
Input logic supply voltage
-0.3
625
V
VSS
Input logic supply return
VDD-25
VDD+0.3
V
HIN1, HIN2 Input logic voltage
VSS-0.3
VDD+0.3
V
VB1, VB2
High side floating well positive supply voltage
-0.3
625
V
VS1
High side floating well negative supply voltage
VB1-25
VB1+0.3
V
VS2
High side floating well negative supply voltage
VB2-25
VB2+0.3
V
HO1
Floating gate drive output voltage
VS1-0.3
VB1+0.3
V
HO2
Floating gate drive output voltage
VS2-0.3
VB2+0.3
V
Allowable VS1 or VS2 offset supply transient relative to
dVS/dt
50
V/ns
COM
dVSS/dt
Allowable VSS input supply transient relative to COM
50
V/ns
PD
Package Power Dissipation @ TA<=+25°C
1
W
RθJA
Thermal Resistance, Junction to Ambient
100
°C/W
TJ
Junction Temperature
-55
150
°C
TS
Storage Temperature
-55
150
°C
TL
Lead temperature (Soldering, 10 seconds)
300
°C
Recommended Operating Conditions
For proper operation, the device should be used within the recommended conditions. All voltage parameters
are absolute voltages referenced to COM, which is the –200V DC bus provided externally. The offset rating
are tested with supplies of (VDD-VSS)=5V and (VCC-COM)=(VB1-VS1)= (VB2-VS2)=15V.
Symbol
Definition
Min
Max
Units
VCC
Low side supply voltage
10
20
V
VDD
Input logic supply voltage
VSS+4.5
VSS+5.5
V
VSS
Input logic supply offset voltage
-0.3
600
V
HIN1, HIN2 IN1~IN2 input voltage
VSS
VDD
V
VB1
High side floating well positive supply voltage
VS1+10
VS1+20
V
VB2
High side floating well positive supply voltage
VS2+10
VS2+20
V
VS1, VS2
High side floating well negative supply voltage
-5
600
V
HO1
Floating gate drive output voltage
VS1
VB1
V
HO2
Floating gate drive output voltage
VS2
VB2
V
TA
Ambient Temperature
-40
125
°C
www.irf.com
© 2008 International Rectifier
5
IRS21962S
Static Electrical Characteristics
(VDD-VSS)=5V and (VCC-COM)=(VBn-VSn)=15V. TA = 25°C. The parameters VIN,th+, VIN,th-, IIN+, IIN, VDDUV+, and VDDUV- are referenced to VSS. The VBSUV+, VBSUV-, VOH, VOL, IO+, and IOparameters are referenced to VS1 or VS2. The VCCUV+, VCCUV- parameters are referenced to COM.
Test
Symbol
Definition
Min
Typ
Max Units
Conditions
VDDUV+ VDD supply undervoltage positive going threshold
4.0
V
VSS -COM = 5V
VDDUV-
VDD supply undervoltage negative going threshold
VDDUVH VDD supply undervoltage lockout hysteresis
3.9
V
VSS -COM = 5V
0.1
V
VSS -COM = 5V
VCCUV+
VCC supply undervoltage positive going threshold
7.5
8.6
9.7
V
VCCUV-
VCC supply undervoltage negative going threshold
7.1
8.2
9.3
V
VCCUVH VCC supply undervoltage lockout hysteresis
VBSUV+ VBS supply undervoltage positive going threshold
--7.5
0.4
8.3
--9.4
V
V
VBSUV-
VBS supply undervoltage negative going threshold
6.9
7.7
8.8
V
VBSUVH
ILKDD
VBS supply undervoltage lockout hysteresis
Input Logic offset supply leakage current
-----
0.6
---
--50
V
ILKBS
Highside floating well offset supply leakage current
---
---
50
µA
IQDD
Quiescent VDD supply current
---
105
180
VIN = 0V or 5V
IQBS
Quiescent VBS supply current
---
100
175
VIN = 0V or 5V
IQCC
Quiescent VCC supply current
---
180
280
uA
VIN,th+
Logic “1” input threshold
3.5
VIN,th-
Logic “0” input threshold
0.6
V
VOH
High level output voltage, VO -VBIAS
---
---
1
VOL
Low level output voltage, VO
---
---
1
IIN+
Logic “1” input bias current
---
5
IIN-
Logic “0” input bias current
---
IO+
Output high short circuit pulsed current
IO-
Output low short circuit pulsed current
VDD = VSS = 600V
VB = VS = 600V
VIN = 0V or 5V
Io+=20mA
V
Io-=20mA
0
-----
uA
VIN=5V
VIN=0V
---
500
---
mA
VO=15V, VIN=5V,
PW<=10us
---
500
---
mA
VO=0V,VIN=0VP,
W<=10us
Dynamic Electrical Characteristics
(VDD-VSS)=5V and (VCC-COM)=(VBn-VSn)=15V. TA = 25. °C CL = 1000pF unless otherwise specified.
All parameters are reference to COM.
Symbol
Definition
Min
Typ Max Unit Test Conditions
ton, toff
Propagation delay from input pin HIN to output
55
90
125
ns Vss=200V, Vs=0V
pin HO
tr
Turn-on 10%-to-90% rise time at HO pin
25
70
ns Vss=200V, Vs=0V
tf
Turn-off 90%-to-10% fall time at HO pin
25
www.irf.com
70
ns
Vss=200V, Vs=0V
© 2008 International Rectifier
6
IRS21962S
Figure 1 Functional Block Diagram
www.irf.com
© 2008 International Rectifier
7
IRS21962S
P W in
50%
Input H IN
t on
50%
t off
tr
tf
P W out
90%
90%
O utput H O
10%
10%
Figure 2 Switching Time Waveforms
H IN1 and H IN 2 of
Part A and Part B
50%
50%
t offA
t onA
H O 1 or H O 2
of Part A
90%
90%
10%
10%
t offB
t onB
H O 1 or H O 2
of Part B
tf
90%
90%
10%
10%
Figure 3 Switching Time Waveforms – Part to Part Propagation Delay Matching
www.irf.com
© 2008 International Rectifier
8
IRS21962S
Input/Output Pin Equivalent Circuit Diagrams
VB1
ESD
Diode
HO1
RESD
ESD
Diode
VS1
VB2
ESD
Diode
HO2
RESD
ESD
Diode
VS2
VB1
600V
VB2
600V
VDD
600V
COM
www.irf.com
© 2008 International Rectifier
9
IRS21962S
Lead Definitions:
Pin
Symbol
Description
1
2
3
4
5
6
VDD
HIN1
HIN2
VSS
NC
NC
Input logic supply voltage
Logic input channel 1
Logic input channel 2
Input logic offset voltage
No connection
No connection
7
VCC
Low side supply voltage
8
COM
Ground
9
10
11
12
13
14
VS1
HO1
VB1
NC
NC
VS2
High side floating well offset voltage
Floating gate driver output voltage channel 1
High side floating well positive supply
No connection
No connection
High side floating well offset voltage
15
HO2
Floating gate driver output voltage channel 2
16
VB2
High side floating well positive supply
Lead Assignments
www.irf.com
© 2008 International Rectifier
10
IRS21962S
Package Details: SOIC16N
www.irf.com
© 2008 International Rectifier
11
IRS21962S
Tape and Reel Details: SOIC16N
LOADED TAPE FEED DIRECTION
A
B
H
D
F
C
NOTE : CONTROLLING
DIM ENSION IN M M
E
G
CARRIER TAPE DIMENSION FOR
Metric
Code
Min
Max
A
7.90
8.10
B
3.90
4.10
C
15.70
16.30
D
7.40
7.60
E
6.40
6.60
F
10.20
10.40
G
1.50
n/a
H
1.50
1.60
16SOICN
Imperial
Min
Max
0.311
0.318
0.153
0.161
0.618
0.641
0.291
0.299
0.252
0.260
0.402
0.409
0.059
n/a
0.059
0.062
F
D
C
B
A
E
G
H
REEL DIMENSIONS FOR 16SOICN
Metric
Imperial
Code
Min
Max
Min
Max
A
329.60
330.25
12.976
13.001
B
20.95
21.45
0.824
0.844
C
12.80
13.20
0.503
0.519
D
1.95
2.45
0.767
0.096
E
98.00
102.00
3.858
4.015
F
n/a
22.40
n/a
0.881
G
18.50
21.10
0.728
0.830
H
16.40
18.40
0.645
0.724
www.irf.com
© 2008 International Rectifier
12
IRS21962S
Part Marking Information
Part number
IRSxxxxx
Date code
YWW ?
Pin 1
Identifier
?
MARKING CODE
P
Lead Free Released
IR logo
? XXXX
Lot Code
(Prod mode –
4 digit SPN code)
Assembly site code
Per SCOP 200-002
Non-Lead Free Released
www.irf.com
© 2008 International Rectifier
13
IRS21962S
Ordering Information
Standard Pack
Base Part Number
IRS21962
Package Type
SOIC16N
Complete Part Number
Form
Quantity
Tube/Bulk
45
IRS21962SPBF
Tape and Reel
2500
IRS21962STRPBF
The information provided in this document is believed to be accurate and reliable. However, International Rectifier assumes no
responsibility for the consequences of the use of this information. International Rectifier assumes no responsibility for any infringement
of patents or of other rights of third parties which may result from the use of this information. No license is granted by implication or
otherwise under any patent or patent rights of International Rectifier. The specifications mentioned in this document are subject to
change without notice. This document supersedes and replaces all information previously supplied.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245
Tel: (310) 252-7105
www.irf.com
© 2008 International Rectifier
14
Similar pages