Foryard FYLP-3W-UWS-A High power led lamp Datasheet

Model. No.
Rev.
FYLP-3W-UWS-A
A
PRODUCT SPECIFICATION
Model No.:
:FYLP-3W-UWS-A
Features:
■High-Power LED Type
■ Size (mm):Φ5.6*8.5 concave
■ Emitting Color:White
■ SMT package
■RoHS Compliant
Applications:
■Decorative lighting
■Architectural lighting
■Interior automotive
■Illuminations
CUSTOMER APPROVED
SIGNATURES
APPROVED BY
NINGBO FORYARD OPTOELECTRONICS CO.,LTD
Add:NO.115 Qixin Road Ningbo Zhejiang China
Tel: 0086-574-87933652 87927870 87922206
Fax: 0086-574-87927917
E-mail:[email protected] ( General)
CHECKED BY
PREPARED BY
Zip:315051
Http://www.foryard.com
Http://www.foryard.com
Page: 1/7
Model. No.
Rev.
FYLP-3W-UWS-A
A
Model No.:
:FYLP-3W-UWS-A
■ Mechanical Dimensions
Notes:
1. Dimension in millimeter, tolerance is ±0.2mm.
3.The specifications,characteristics and technical data described in the datasheet are subject to change without prior notice.
Http://www.foryard.com
Page: 2/7
FYLP-3W-UWS-A
A
Model. No.
Rev.
Model No.:
:FYLP-3W-UWS-A
■ Absolute Maximun Ratings(Ta=25º
º C)
Items
Symbol
Absolute maximum Rating
Unit
IF
800
mA
Peak Forward Current*
IFP
1000
mA
Power Dissipation
PD
3000
Mw
Operation Temperature
Topr
-40ºC+85ºC
℃
Storage Temperature
Tstg
-40ºC+100ºC
℃
Reverse Voltage
VR
5
V
Soldering Temperature
Tsol
Forward Current(DC)
Lead Soldering:260℃/3sec
*Pulse width≦
≦1msec duty≦
≦1/10
■ Typical Electrical &Optical Charcteristics(Ta=25ºC)
Items
Symbol
Condition
Min.
Typ.
Max
Unit
Forward Voltage
VF
IF =800mA
2.8
---
3.6
V
Reverse Current
IR
VR = 5V
5
uA
Chromatic Coordinates
(X,Y)
IF =800mA
---
(0.34,0.38)
---
---
Color Temperature
CCT
IF =800mA
5000
---
6000
K
Luminous Flux
ΦV
IF =800mA
---
170
---
LM
50% Power Angle
2θ½
IF =800mA
---
120
---
Deg
■ Material
Item
Reflector
Wire
Encapsulate
Chip
Material
PPA
Gold
Silicone
InGaN
Note:
1.Luminous Intensity is based on the Foryard standards.
2.Pay attention about static for InGaN
Http://www.foryard.com
Page: 3/7
Model. No.
Rev.
FYLP-3W-UWS-A
A
Model No.:
:FYLP-3W-UWS-A
■ Typical Eletrical/Optical Characteristics Curves(Ta=25º
º C Unless Otherwise Noted)
O3
l2
A
/
N
a
G
n
I
Radiation pattern.
Http://www.foryard.com
)
1
=
x
a
m
@
P
O
L
y
t
i
s
n
e
t
n
I
s
u
o
n
o
i
m
u
L
e
v
i
t
a
l
e
R
(
Page: 4/7
Model. No.
Rev.
FYLP-3W-UWS-A
A
Model No.:
:FYLP-3W-UWS-A
■ Packing Diagram
FORYARD
RoHS
Part NO: FYLP-XXXXXX
QC:
PASS
QC
xxxx/xx/xx
xxxxxxxxxx
OUTSIDE LABEL
FORYARD
O P T O E L E C T R O N I C S
www.foryard.com
10 Reels /Box
6 Boxes/Carton
FORYARD
O P T O E L E C T R O N I C S
LED
PN:FYLS-xxxxxxxx-xx
Qty:XXXXX PCS
Date:xxxx/xx/xx
PASS
GW: xx
KG QC: QC
NW: xx
KG
RoHS
ATTENTION
xxxxxxxxxx
OUTSIDE LABEL
Note: The specifications are subject to change without notice. Please contact us for updated information.
Http://www.foryard.com
Page: 5/7
FYLP-3W-UWS-A
A
Model. No.
Rev.
Model No.:
:FYLP-3W-UWS-A
■ Precautions for use:
1. Storage
To prevent moisture absorption into High-power LEDs during the transportation and storage , the LEDs are packed
in a moisture-barrier bag. Desiccants and a humidity indicator are packed together with the LEDs as
secondary protection
The shelf life of LEDs stored in the original sealed bag at <40℃ and < 90% RH is 12 months. Baking is
required if the shelf life has expired
Before opening the packaging , check for air leaks in the bag.
After the bag is opened, the High-power LEDs must be stored at <30℃ and < 60% RH. Under these conditions,
High-power LEDs must be used within 24 hours. If the LEDs are not within 24 hours after removal from the bag ,
baking is required Take the material out of the packaging bag before baking. Do not open the oven door
frequently during the baking process.
2. Soldering
(1) Manual soldering with a soldering Iron
Use a soldering iron of less than 25 watts is recommended . The iron temperature must be kept below 315℃
And soldering time no more than 2 seconds.
The epoxy resin of an High-power LED should not contact the tip of the soldering iron.
No mechanical stress should be exerted on the resin portion of an High-power LED during soldering.
Handling of an High-power LED should be done only when the package has been cooled down to below 40℃
(2)Reflow soldering
Temperature profile
Temperature
Peak temperature
Melting-point
Pre-heat
Soak
Reflow
Cooling
Time
Http://www.foryard.com
Page: 6/7
Model. No.
Rev.
FYLP-3W-UWS-A
A
Model No.:
:FYLP-3W-UWS-A
Solder=Sn63-Pb37
Solder= Pb-Free
Average ramp-up rate:4℃/sec.max
Average ramp-up rate:4℃/sec.max
Peak preheat temperature:100-150℃
Peak preheat temperature:100-150℃
preheat time:100seconds.max
preheat time:100seconds.max
ramp-down rate:6℃/sec.max
ramp-down rate:6℃/sec.max
Peak temperature:230℃
Peak temperature:250℃
Time within 5℃ of actual peak
temperature=10 sec. max
Time within 5℃ of actual peak temperature=10 sec.
max
Duration above 183℃ is 80 sec. max
Duration above 217℃ is 80 sec. max
High-power LED should not be modified after soldering. If modification cannot be avoided, the modification
must be pre-qualified to avoid damage to the High-power LEDs.
Reflow soldering should not be done more than one time
No stress should be exerted on the package during soldering.
3. Static Electricity
Static Electricity and surge voltage damage the LEDs. So it is recommended that an ESD wrist band,
ESD shoe strap or an anti-electrostatic glove be used when handling the LEDs.
All devices, equipment and machinery must be properly grounded
4. Others
Reverse voltage should not exceed the absolute maximum rating on the data sheet. The colour of the LEDs
is changed slightly an operating current and thermal.
This device should not be used in any type of fluid such as water, oil, organic solvent and etc
When washing is required, IPA (Isopropyl Alcohol) should be used.
The influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the way.
High-brightness LED light may injure human eyes. Avoid looking directly into lighted LED
The appearance and specifications of the product may be modified for improvement without notice.
Http://www.foryard.com
Page: 7/7
Similar pages