ON ESD5481MUT5G Esd protection diode Datasheet

ESD5481
ESD Protection Diodes
Micro−Packaged Diodes for ESD Protection
The ESD5481 is designed to protect voltage sensitive components
from ESD. Excellent clamping capability, low leakage, and fast
response time provide best in class protection on designs that are
exposed to ESD. Because of its small size, it is suited for use in cellular
phones, MP3 players, digital cameras and many other portable
applications where board space comes at a premium.
www.onsemi.com
1
2
Specification Features
•
•
•
•
•
•
•
•
•
•
Low Capacitance 15 pF
Low Clamping Voltage
Small Body Outline Dimensions: 0.60 mm x 0.30 mm
Low Body Height: 0.3 mm
Stand−off Voltage: 5.0 V
Low Leakage
Response Time is < 1 ns
IEC61000−4−2 Level 4 ESD Protection
IEC61000−4−4 Level 4 EFT Protection
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
X3DFN2
CASE 152AF
AM
A = Specific Device Code
M = Date Code
ORDERING INFORMATION
ESD5481MUT5G
Device Meets MSL 1 Requirements
Package
Shipping†
X3DFN2
(Pb−Free)
10,000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
MAXIMUM RATINGS
Symbol
Value
Unit
IEC 61000−4−2 (ESD)
Contact
Air
±20
±20
kV
IEC 61000−4−4 (EFT)
5/50 ns
40
A
Total Power Dissipation on FR−5 Board
(Note 1) @ TA = 25°C
Thermal Resistance, Junction−to−Ambient
°PD°
300
mW
RqJA
400
°C/W
Junction and Storage Temperature Range
TJ, Tstg
−55 to +150
°C
TL
260
°C
Lead Solder Temperature − Maximum
(10 Second Duration)
PIN 1
Device
Mechanical Characteristics
MOUNTING POSITION: Any
QUALIFIED MAX REFLOW TEMPERATURE: 260°C
Rating
MARKING
DIAGRAM
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−5 = 1.0 x 0.75 x 0.62 in.
See Application Note AND8308/D for further description of survivability specs.
© Semiconductor Components Industries, LLC, 2016
April, 2016 − Rev. 7
1
Publication Order Number:
ESD5481/D
ESD5481
ELECTRICAL CHARACTERISTICS
I
(TA = 25°C unless otherwise noted)
IPP
Parameter
Symbol
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
IR VRWM VBR VC
IT
Working Peak Reverse Voltage
Maximum Reverse Leakage Current @ VRWM
VBR
IT
V
RDYN
Breakdown Voltage @ IT
IPP
Test Current
RDYN
RDYN
IT
VC VBR VRWM IR
Bi−Directional TVS
Dynamic Resistance
*See Application Note AND8308/D for detailed explanations of
datasheet parameters.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
Parameter
Reverse Working Voltage
Breakdown Voltage
Symbol
VRWM
VBR
Conditions
IT = 1 mA
5.7
IR
VRWM = 5.0 V
Clamping Voltage (Note 2)
VC
IEC61000−4−2, ±8 kV Contact
Clamping Voltage TLP
(Note 3)
VC
IPP = 16 A
IPP = −16 A
Clamping Voltage 8/20 ms
Waveform per Figure 10
VC
RDYN
Typ
I/O Pin to I/O Pin
Reverse Leakage Current
Dynamic Resistance
Min
Max
Unit
5.0
V
8.0
V
1.0
mA
See Figures 1 and 2
V
19.7
−11
23
−13
V
IPP = 1 A
IPP = 2 A
9.8
12.4
12
15
V
Pin 1 to Pin 2
Pin 2 to Pin 1
0.49
0.28
W
A
IEC 61000−4−2 Level 2 equivalent
(±8 kV Contact, ±15 kV Air)
Reverse Peak Pulse Current
IPP
per IEC 61000−4−5 (8/20 ms) Figure 10
2.0
Junction Capacitance
CJ
VR = 0 V, f = 1 MHz
12
15
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. For test procedure see application note AND8307/D.
3. ANSI/ESD STM5.5.1 − Electrostatic Discharge Sensitivity Testing using Transmission Line Pulse (TLP) Model.
TLP conditions: Z0 = 50 W, tp = 100 ns, tr = 4 ns, averaging window; t1 = 30 ns to t2 = 60 ns.
Figure 1. ESD Clamping Voltage Screenshot
Positive 8 kV Contact per IEC61000−4−2
Figure 2. ESD Clamping Voltage Screenshot
Negative 8 kV Contact per IEC61000−4−2
www.onsemi.com
2
ESD5481
IEC61000−4−2 Waveform
IEC 61000−4−2 Spec.
Ipeak
Level
Test Voltage (kV)
First Peak
Current
(A)
Current at
30 ns (A)
Current at
60 ns (A)
1
2
7.5
4
2
2
4
15
8
4
3
6
22.5
12
6
4
8
30
16
8
100%
90%
I @ 30 ns
I @ 60 ns
10%
tP = 0.7 ns to 1 ns
Figure 3. IEC61000−4−2 Spec
ESD Gun
Oscilloscope
TVS
50 W
Cable
50 W
Figure 4. Diagram of ESD Test Setup
The following is taken from Application Note
AND8308/D − Interpretation of Datasheet Parameters
for ESD Devices.
systems such as cell phones or laptop computers it is not
clearly defined in the spec how to specify a clamping voltage
at the device level. ON Semiconductor has developed a way
to examine the entire voltage waveform across the ESD
protection diode over the time domain of an ESD pulse in the
form of an oscilloscope screenshot, which can be found on
the datasheets for all ESD protection diodes. For more
information on how ON Semiconductor creates these
screenshots and how to interpret them please refer to
AND8307/D.
ESD Voltage Clamping
For sensitive circuit elements it is important to limit the
voltage that an IC will be exposed to during an ESD event
to as low a voltage as possible. The ESD clamping voltage
is the voltage drop across the ESD protection diode during
an ESD event per the IEC61000−4−2 waveform. Since the
IEC61000−4−2 was written as a pass/fail spec for larger
www.onsemi.com
3
ESD5481
−24
20
−22
10
12
10
14
12
6
10
4
8
6
4
2
0
0
2
4
6
8
10 12 14
TLP Current[A]
8
16
EQUIVALENT VIEC (kV)
−20
18
TLP Current [A]
−26
12
22
−18
8
−16
−14
6
−12
−10
4
−8
−6
2
−4
0
−2
0
16 18 20 22 24
2
0
0
−2
−4
−6
Vc [V]
Figure 5. Positive TLP I−V Curve
NOTE:
EQUIVALENT VIEC (kV)
24
−8
Vc [V]
−10
−12
−14
Figure 6. Negative TLP I−V Curve
TLP parameter: Z0 = 50 W, tp = 100 ns, tr = 300 ps, averaging window: t1 = 30 ns to t2 = 60 ns. VIEC is the equivalent voltage
stress level calculated at the secondary peak of the IEC 61000−4−2 waveform at t = 30 ns with 2 A/kV. See TLP description
below for more information.
Transmission Line Pulse (TLP) Measurement
L
Transmission Line Pulse (TLP) provides current versus
voltage (I−V) curves in which each data point is obtained
from a 100 ns long rectangular pulse from a charged
transmission line. A simplified schematic of a typical TLP
system is shown in Figure 7. TLP I−V curves of ESD
protection devices accurately demonstrate the product’s
ESD capability because the 10s of amps current levels and
under 100 ns time scale match those of an ESD event. This
is illustrated in Figure 8 where an 8 kV IEC 61000−4−2
current waveform is compared with TLP current pulses at
8 A and 16 A. A TLP I−V curve shows the voltage at which
the device turns on as well as how well the device clamps
voltage over a range of current levels. For more information
on TLP measurements and how to interpret them please
refer to AND9007/D.
S Attenuator
÷
50 W Coax
Cable
10 MW
IM
50 W Coax
Cable
VM
DUT
VC
Oscilloscope
Figure 7. Simplified Schematic of a Typical TLP
System
www.onsemi.com
4
ESD5481
Figure 8. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms
1E−02
1E−03
1E−04
1E−05
1E−06
1E−08
1E−09
1E−10
1E−11
1E−12
1E−13
1E−14
−8
−6
−4
−2
0
V1[V]
2
4
6
8
Figure 9. IV Characteristics
100
% OF PEAK PULSE CURRENT
I [A]
1E−07
PEAK VALUE IRSM @ 8 ms
tr
90
PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 ms
80
70
60
HALF VALUE IRSM/2 @ 20 ms
50
40
30
tP
20
10
0
0
20
40
t, TIME (ms)
60
Figure 10. 8 X 20 ms Pulse Waveform
www.onsemi.com
5
80
ESD5481
PACKAGE DIMENSIONS
X3DFN2, 0.62x0.32, 0.355P, (0201)
CASE 152AF
ISSUE A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
A B
D
PIN 1
INDICATOR
(OPTIONAL)
DIM
A
A1
b
D
E
e
L2
E
TOP VIEW
0.05 C
MILLIMETERS
MIN
MAX
0.25
0.33
−−−
0.05
0.22
0.28
0.58
0.66
0.28
0.36
0.355 BSC
0.17
0.23
A
0.05 C
2X
A1
SIDE VIEW
C
RECOMMENDED
MOUNTING FOOTPRINT*
SEATING
PLANE
0.74
e
2X
1
1
b
2
2X
2X
0.05
M
2X
0.30
0.05
L2
M
0.31
C A B
DIMENSIONS: MILLIMETERS
C A B
See Application Note AND8398/D for more mounting details
BOTTOM VIEW
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
ESD5481/D
Similar pages