ON NTMFD4C87NT3G Dual n-channel so8fl Datasheet

NTMFD4C87N
PowerPhase, Dual
N-Channel SO8FL
30 V, High Side 20 A / Low Side 26 A
Features
•
•
•
•
Co−Packaged Power Stage Solution to Minimize Board Space
Minimized Parasitic Inductances
Optimized Devices to Reduce Power Losses
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
www.onsemi.com
V(BR)DSS
RDS(ON) MAX
Q1 Top FET
30 V
5.4 mW @ 10 V
20 A
8.1 mW @ 4.5 V
Q2 Bottom
FET
30 V
• DC−DC Converters
• System Voltage Rails
• Point of Load
ID MAX
3.1 mW @ 10 V
26 A
4.3 mW @ 4.5 V
D1
(3, 4, 9)
(1) G1
(2) S1
SW (5, 6, 7)
(8) G2
S2 (10)
PIN CONNECTIONS
Figure 1. Typical Application Circuit
D1 4
100
D1 3
EFFICIENCY (%)
95
S1 2
5 SW
9
D1
10
S2
6 SW
7 SW
G1 1
90
8 G2
(Bottom View)
85
MARKING
DIAGRAM
80
VIN = 12 V
VOUT = 1.2 V
VGS = 5 V
FSW = 300 kHz
TA = 25°C
75
70
0
5
10
15
LOAD CURRENT (A)
20
1
DFN8
CASE 506CR
4C87N
AYWZZ
1
25
4C87N
A
Y
W
ZZ
Figure 2. Typical Efficiency Performance
POWERPHASEGEVB Evaluation Board
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Lot Traceability
ORDERING INFORMATION
See detailed ordering and shipping information on page 10 of
this data sheet.
© Semiconductor Components Industries, LLC, 2015
August, 2015 − Rev. 1
1
Publication Order Number:
NTMFD4C87N/D
NTMFD4C87N
MAXIMUM RATINGS (TJ = 25°C unless otherwise stated)
Parameter
Drain−to−Source Voltage
Q1
Drain−to−Source Voltage
Q2
Gate−to−Source Voltage
Q1
Gate−to−Source Voltage
Q2
Continuous Drain Current RqJA (Note 1)
TA = 25°C
Q1
Symbol
Value
Unit
VDSS
30
V
VGS
±20
V
ID
15.4
TA = 85°C
TA = 25°C
11.1
Q2
19.5
TA = 85°C
Power Dissipation
RqJA (Note 1)
TA = 25°C
Continuous Drain Current RqJA ≤ 10 s (Note 1)
TA = 25°C
A
14.1
Q1
PD
1.89
ID
21.0
W
Q2
Q1
TA = 85°C
TA = 25°C
Steady
State
15.1
Q2
26.6
TA = 85°C
Power Dissipation
RqJA ≤ 10 s (Note 1)
TA = 25°C
Continuous Drain Current
RqJA (Note 2)
TA = 25°C
A
19.2
Q1
PD
3.51
ID
11.7
W
Q2
Q1
TA = 85°C
TA = 25°C
8.5
Q2
14.9
TA = 85°C
Power Dissipation
RqJA (Note 2)
TA = 25 °C
Pulsed Drain Current
TA = 25°C
tp = 10 ms
A
10.7
Q1
PD
1.10
W
IDM
160
A
Q2
Operating Junction and Storage Temperature
Q1
Q2
Q1
260
TJ, TSTG
−55 to +150
°C
IS
10
A
Q2
Source Current (Body Diode)
Q1
Q2
Drain to Source DV/DT
Single Pulse Drain−to−Source Avalanche Energy (TJ = 25C,
VDD = 50 V, VGS = 10 V, L = 0.1 mH, RG = 25 W)
10
dV/dt
6
V/ns
mJ
IL = 20 Apk
Q1
EAS
20
IL = 30 Apk
Q2
EAS
45
TL
260
Lead Temperature for Soldering Purposes
(1/8” from case for 10 s)
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Surface−mounted on FR4 board using 1 sq−in pad, 2 oz Cu.
2. Surface−mounted on FR4 board using the minimum recommended pad size of 100 mm2.
www.onsemi.com
2
NTMFD4C87N
THERMAL RESISTANCE MAXIMUM RATINGS
Symbol
Value
Junction−to−Ambient – Steady State (Note 3)
Parameter
RqJA
66.0
Junction−to−Ambient – Steady State (Note 4)
RqJA
113.7
Junction−to−Ambient – (t ≤ 10 s) (Note 3)
RqJA
35.6
Unit
°C/W
3. Surface−mounted on FR4 board using 1 sq−in pad, 2 oz Cu.
4. Surface−mounted on FR4 board using the minimum recommended pad size of 100 mm2.
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
FET
Symbol
Test Condition
V(BR)DSS
VGS = 0 V, ID = 250 mA
Min
Typ
Max
Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage
Q1
Drain−to−Source Breakdown Voltage Temperature
Coefficient
Q1
Q2
V(BR)DSS
/ TJ
Zero Gate Voltage Drain
Current
Q1
IDSS
Q2
Q2
Gate−to−Source Leakage
Current
Q1
30
15.8
mV /
°C
15.3
VGS = 0 V,
VDS = 24 V
VGS = 0 V,
VDS = 24 V
IGSS
V
30
TJ = 25°C
1
TJ = 125°C
10
TJ = 25°C
1
VGS = 0 V, VDS = ±20 V
mA
100
Q2
100
nA
ON CHARACTERISTICS (Note 5)
Gate Threshold Voltage
Q1
VGS(TH)
VGS = VDS, ID = 250 mA
Q2
Negative Threshold Temperature Coefficient
Q1
Drain−to−Source On Resistance
Q1
Q2
VGS(TH) /
TJ
RDS(on)
Q2
1.3
2.2
1.3
2.2
5.0
V
mV /
°C
5.1
VGS = 10 V
ID = 30 A
4.3
5.4
VGS = 4.5 V
ID = 18 A
6.5
8.1
VGS = 10 V
ID = 30 A
2.5
3.1
VGS = 4.5 V
ID = 30 A
3.4
4.3
mW
CAPACITANCES
Q1
Input Capacitance
Q2
1252
CISS
1939
Q1
Output Capacitance
Q2
610
COSS
VGS = 0 V, f = 1 MHz, VDS = 15 V
Q1
Reverse Capacitance
Q2
1055
pF
129
CRSS
49
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
5. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%.
6. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
3
NTMFD4C87N
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
FET
Symbol
Test Condition
Min
Typ
Max
Unit
CHARGES, CAPACITANCES & GATE RESISTANCE
Q1
Total Gate Charge
Q2
10.9
QG(TOT)
13.8
Q1
Threshold Gate Charge
Q2
1.2
QG(TH)
Q1
Gate−to−Source Charge
Q2
2.0
VGS = 4.5 V, VDS = 15 V; ID = 30 A
QGS
Q2
5.4
QGD
3.6
Q1
Total Gate Charge
Q2
22.2
QG(TOT)
VGS = 10 V, VDS = 15 V; ID = 30 A
RG
Q1
Gate Resistance
nC
5.5
Q1
Gate−to−Drain Charge
3.4
30.3
1.0
TA = 25°C
Q2
1.0
nC
W
SWITCHING CHARACTERISTICS (Note 6)
Q1
Turn−On Delay Time
Q2
8.9
td(ON)
10.6
Q1
Rise Time
21.2
tr
Q2
VGS = 4.5 V, VDS = 15 V,
ID = 15 A, RG = 3.0 W
Q1
Turn−Off Delay Time
Q2
td(OFF)
ns
21
Q1
Fall Time
4.6
15.3
4.4
tf
Q2
4.9
SWITCHING CHARACTERISTICS (Note 6)
Q1
Turn−On Delay Time
Q2
6.7
td(ON)
8.1
Q1
Rise Time
Q2
19.5
tr
VGS = 10 V, VDS = 15 V,
ID = 15 A, RG = 3.0 W
Q1
Turn−Off Delay Time
Q2
td(OFF)
Q2
20.1
ns
26.2
Q1
Fall Time
15
2.8
tf
3.1
DRAIN−SOURCE DIODE CHARACTERISTICS
VGS = 0 V,
IS = 10 A
Q1
Forward Voltage
VSD
Q2
VGS = 0 V,
IS = 10 A
TJ = 25°C
0.82
TJ = 125°C
1.15
TJ = 25°C
0.8
TJ = 125°C
1.10
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
5. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%.
6. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
4
NTMFD4C87N
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
FET
Symbol
Test Condition
Min
Typ
Max
Unit
DRAIN−SOURCE DIODE CHARACTERISTICS
Q1
Reverse Recovery Time
Q2
29.1
tRR
40.2
Q1
Charge Time
Q2
14.2
ta
VGS = 0 V, dIS/dt = 100 A/ms, IS = 30 A
Q1
Discharge Time
Q2
19.5
tb
Q2
14.6
20.6
Q1
Reverse Recovery Charge
ns
21
QRR
39
nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
5. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%.
6. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
5
NTMFD4C87N
TYPICAL CHARACTERISTICS − Q1
100
4.5 V to 10 V
100
4.0 V
90
TJ = 25°C
90
3.8 V
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
80
70
3.6 V
60
3.4 V
50
40
3.2 V
30
3.0 V
20
2.8 V
VGS = 2.6 V
10
70
60
50
40
30
20
TJ = 125°C
1
2
3
4
0
5
0.5 1.0 1.5 2.0
2.5 3.0
3.5 4.0
4.5 5.0 5.5
VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 3. On−Region Characteristics
Figure 4. Transfer Characteristics
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
0.026
0.024
0.022
ID = 30 A
0.020
0.018
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
3
TJ = −55°C
TJ = 25°C
0
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
80
10
0
4
5
6
7
8
9
10
0.009
0.008
TJ = 25°C
VGS = 4.5 V
0.007
0.006
0.005
VGS = 10 V
0.004
0.003
10
20
30
40
50
60
70
VGS, GATE VOLTAGE (V)
ID, DRAIN CURRENT (A)
Figure 5. On−Resistance vs. Gate−to−Source
Voltage
Figure 6. On−Resistance vs. Drain Current and
Gate Voltage
1600
1.7
1.6
1.5
VGS = 10 V
ID = 30 A
1400
C, CAPACITANCE (pF)
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE (W)
VDS = 3 V
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
−50
VGS = 0 V
TJ = 25°C
Ciss
1200
1000
Coss
800
600
400
Crss
200
0
−25
0
25
50
75
100
125
150
0
5
10
15
20
25
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 7. On−Resistance Variation with
Temperature
Figure 8. Capacitance Variation
www.onsemi.com
6
30
NTMFD4C87N
11
20
QT
10
18
9
IS, SOURCE CURRENT (A)
VGS, GATE−TO−SOURCE VOLTAGE (V)
TYPICAL CHARACTERISTICS − Q1
VGS = 4.5 V
VDS = 15 V
ID = 30 A
TJ = 25°C
8
7
6
5
4
QGD
QGS
3
2
14
12
10
8
6
4
2
0
1
0
0
1
3
2
4
5
6
7
8
9
10
11
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
QG, TOTAL GATE CHARGE (nC)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
Figure 10. Diode Forward Voltage vs. Current
1000
1000
ID, DRAIN CURRENT (A)
VGS = 10 V
VDS = 15 V
ID = 15 A
t, TIME (ns)
TJ = 25°C
16
td(off)
tf
100
tr
td(on)
10
VGS ≤ 10 V
Single Pulse
TC = 25°C
100
10 ms
100 ms
1 ms
10
10 ms
1
RDS(on) Limit
Thermal Limit
Package Limit
dc
0.1
1
1
100
10
0.1
1
10
100
RG, GATE RESISTANCE (W)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 11. Resistive Switching Time Variation
vs. Gate Resistance
Figure 12. Maximum Rated Forward Biased
Safe Operating Area
100
50% Duty Cycle
R(t) (°C/W)
10
1
0.1
0.01
20%
10%
5%
2%
1%
PCB Cu Area 650 mm2
PCB Cu thk 1 oz
Single Pulse
0.001
0.000001
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
Figure 13. Thermal Characteristics
www.onsemi.com
7
1
10
100
1000
NTMFD4C87N
0.028
0.026
0.024
0.022
0.020
0.018
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
3.0
TJ = 25°C
3.8 V
3.6 V
4 V to 6.5 V
140
130 VDS = 3 V
120
110
100
90
80
70
60
50
40
30
20
10
0
0
0.5 1.0
ID, DRAIN CURRENT (A)
140
130 10 V
120
110
100
90
80
70
60
50
40
30
20
10
0
0
3.4 V
3.2 V
3.0 V
2.8 V
2.6 V
1
2
3
5
4
2.0
2.5
3.0
3.5
4.0
Figure 15. Transfer Characteristics
ID = 30 A
TJ = 25°C
4.0
5.0
6.0
7.0
8.0
9.0
10
4.5
5.0
4.5
TJ = 25°C
4.0
VGS = 4.5 V
3.5
3.0
VGS = 10 V
2.5
2.0
1.5
1.0
0.5
0
10
20
30
40
50
60
70
ID, DRAIN CURRENT (A)
Figure 17. On−Resistance vs. Drain Current
and Gate Voltage
1.7
10000
VGS = 0 V
ID = 30 A
VGS = 10 V
TJ = 150°C
IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED)
TJ = −55°C
1.5
Figure 14. On−Region Characteristics
Figure 16. On−Resistance vs. VGS
1.5
TJ = 25°C
VGS, GATE−TO−SOURCE VOLTAGE (V)
VGS, GATE−TO−SOURCE VOLTAGE (V)
1.6
TJ = 125°C
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
ID, DRAIN CURRENT (A)
TYPICAL CHARACTERISTICS − Q2
1.4
1.3
1.2
1.1
1.0
1000
TJ = 125°C
100
TJ = 85°C
0.9
0.8
0.7
−50
10
−25
0
25
50
75
100
125
150
5
10
15
20
25
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 18. On−Resistance Variation with
Temperature
Figure 19. Drain−to−Source Leakage Current
vs. Voltage
www.onsemi.com
8
30
NTMFD4C87N
TYPICAL CHARACTERISTICS − Q2
VGS = 0 V
TJ = 25°C
f = 1 MHz
3500
3000
2500
Ciss
2000
Coss
1500
1000
500
0
Crss
0
5
10
15
20
25
11
QT
10
9
TJ = 25°C
VDS = 15 V
VGS = 4.5 V
ID = 30 A
8
7
6
5
4
2
1
0
0
30
Qgd
Qgs
3
2
4
6
8
10
12
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Qg, TOTAL GATE CHARGE (nC)
Figure 20. Capacitance Variation
Figure 21. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
20
18
IS, SOURCE CURRENT (A)
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
4000
TJ = 25°C
16
14
12
10
8
6
4
2
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 22. Diode Forward Voltage vs. Current
www.onsemi.com
9
0.9
14
NTMFD4C87N
TYPICAL CHARACTERISTICS − Q2
1000
t, TIME (ns)
VGS = 10 V
VDS = 15 V
ID = 15 A
ID, DRAIN CURRENT (A)
1000
td(off)
100
tf
tr
td(on)
10
VGS ≤ 10 V
Single Pulse
TC = 25°C
100
10 ms
100 ms
1 ms
10
10 ms
1
RDS(on) Limit
Thermal Limit
Package Limit
dc
0.1
1
1
10
100
0.1
1
10
100
RG, GATE RESISTANCE (W)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 23. Resistive Switching Time Variation
vs. Gate Resistance
Figure 24. Maximum Rated Forward Biased
Safe Operating Area
100
50% Duty Cycle
R(t) (°C/W)
10
1
0.1
0.01
20%
10%
5%
2%
1%
PCB Cu Area 650 mm2
PCB Cu thk 1 oz
Single Pulse
0.001
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
PULSE TIME (sec)
Figure 25. Thermal Characteristics
ORDERING INFORMATION
Package
Shipping†
NTMFD4C87NT1G
DFN8
(Pb−Free)
1500 / Tape & Reel
NTMFD4C87NT3G
DFN8
(Pb−Free)
5000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
10
NTMFD4C87N
PACKAGE DIMENSIONS
DFN8 5x6, 1.27P PowerPhase FET
CASE 506CR
ISSUE C
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS b AND b1 APPLY TO PLATED TERMINAL AND ARE
MEASURED BETWEEN 0.15 AND 0.25 MM FROM THE TIPS.
4. COPLANARITY APPLIES TO THE EXPOSED PADS AS WELL AS THE
TERMINALS.
5. DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
6. SEATING PLANE IS DEFINED BY THE TERMINALS. A1 IS DEFINED
AS THE DISTANCE FROM THE SEATING PLANE TO THE LOWEST
POINT ON THE PACKAGE BODY.
0.20 C
D
A
B
D1
8
PIN ONE
IDENTIFIER
7
ÉÉ
ÉÉ
1
2
6
2X
0.20 C
5
E1
E
4X
h
3
c
4
A1
TOP VIEW
A
0.10 C
DETAIL A
0.10 C
C
NOTE 4
SIDE VIEW
8X
b
0.10
M
0.05
M
1
5X
DETAIL A
L
6X
SEATING
PLANE
NOTE 6
0.10
C A B
C
C A B
NOTE 3
1
E3
b2
0.10
M
C A B
E2
G
RECOMMENDED
SOLDERING FOOTPRINT*
L2
D3
e/2
e
BOTTOM VIEW
MILLIMETERS
MAX
MIN
1.10
0.90
0.00
0.05
0.40
0.60
0.40
0.60
0.20
0.30
5.15 BSC
4.90
5.10
3.70
3.90
2.96
3.16
6.15 BSC
5.80
6.00
2.37
2.57
1.05
1.25
1.36
1.56
1.27 BSC
0.625 BSC
1.615 BSC
−−−
12 _
0.34
0.59
1.68
1.93
D2
G1
E4
M
DIM
A
A1
b
b2
c
D
D1
D2
D3
E
E1
E2
E3
E4
e
G
G1
h
L
L2
5.50
4.05
SUPPLEMENTAL
BOTTOM VIEW
1.27
PITCH
0.62
2.07
5X
0.75
0.54
1.22
2.67
1.66
5X
0.71 2.31
0.76
0.23
0.98
6.50
6X
0.65
4.10
DIMENSION: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
11
NTMFD4C87N
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
12
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTMFD4C87N/D