ETC2 AP-UM001GQ10ES-MS Usb-disk moduleâ ¡plus Datasheet

RoHS Compliant
USB-Disk ModuleⅡPlus
Specification
May 24, 2011
Version 1.1
Apacer Technology Inc.
th
4 Fl., 75 Hsin Tai Wu Rd., Sec.1, Hsichih, New Taipei City, Taiwan 221
Tel: +886-2-2698-2888
www.apacer.com
Fax: +886-2-2698-2889
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
FEATURES:
•
USB2.0 High-Speed and USB1.1 FullSpeed compatible interface
•
Capacity
256, 512 MB
1, 2, 4, 8 GB
•
–
–
–
Fast sustained read performance
Sustained read: 30 MB/s
–
Fast sustained write performance
Sustained write: 25 MB/s
•
•
•
•
–
•
Support Ready Boost for Windows Vista
•
–
–
–
Support boot-up function for OS
Windows XP Embedded
Windows CE
Linux
–
–
–
Temperature ranges
0°C to 70°C for operation (standard)
1
-40°C to 85°C for operation (ET )
-40°C to 100°C for storage
–
–
Power consumption (typical)
Active mode: 181 mA
Sleep mode: 402 μA
–
Connector
10-pin (2x5) female header
•
Intelligent USB Module
Implements dynamic wear-leveling
algorithms to substantially increase
longevity of flash media
– BCH (24 bit) Error Detection Code/Error
Correction Code (EDC/ECC)
– Intrinsic data integrity after power loss
– Wear leveling algorithm that provides more
reliable data storage over an extended
period
–
•
•
Extended Data Protection (Optional)
– Write protection setting by jumper for
prevention of data overwrites.
Zero Power Data Retention
Batteries not required for data storage
•
RoHS Compliant
•
Support Non-Removable Setting
2
1. Extended Temperature
2. Standard Temperature Exclusive
1
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
TABLE OF CONTENTS
1. General Description ..............................................................................3
1.1 Performance-optimized Controller....................................................................................................... 3
1.1.1 Power Management Unit (PMU) ...................................................................................................................3
1.1.2 SRAM Buffer .................................................................................................................................................3
1.1.3 Error Correction Code (ECC) ........................................................................................................................3
1.1.4 Wear-Leveling ...............................................................................................................................................3
1.1.5 Write Protection Mode (Optional) ..................................................................................................................3
2. Functional Block Diagram.....................................................................4
3. Pin Assignment......................................................................................5
3.1 Type A, Type B, Type C, and Type E.................................................................................................. 5
3.2 Type D﹙STD﹚................................................................................................................................... 6
3.3 Type D﹙LP﹚ ..................................................................................................................................... 7
4. Capacity Specifications ........................................................................8
4.1 Functional Specifications..................................................................................................................... 8
4.2 Environmental Specifications .............................................................................................................. 8
5. Electrical Specification ........................................................................9
5.1 AC Characteristics............................................................................................................................... 9
6. Physical Dimension .............................................................................10
6.1 Horizontal Design .............................................................................................................................. 10
6.1.1 Type A (STD 90D)......................................................................................................................................10
6.1.2 Type B (STD 90D-MH) ...............................................................................................................................11
6.1.3 Type C (STD 90D-MS) ...............................................................................................................................12
6.2 Vertical Design .................................................................................................................................. 13
6.2.1 Type D (STD 180D)....................................................................................................................................13
6.3 Low Profile Design............................................................................................................................. 14
6.3.1 Type D (LP 180D) .......................................................................................................................................14
6.3.2 Type E (LP 90D-MS) ...................................................................................................................................15
7. Product Ordering Information.............................................................16
7.1 Product Code Designation ................................................................................................................ 16
7.2 Valid Combinations............................................................................................................................ 17
7.2.1 Type A
7.2.2 Type B
7.2.3 Type C
7.2.4 Type D
7.2.5 Type D
7.2.6 Type E
(STD 90D)......................................................................................................................................17
(STD 90D-MH) ...............................................................................................................................17
(STD 90D-MS) ...............................................................................................................................17
(STD 180D)....................................................................................................................................18
(LP 180D) ......................................................................................................................................18
(LP 90D-MS) ..................................................................................................................................18
2
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
1. General Description
Apacer’s USB-Disk Module (UDM) is a high performance, embedded solid state drive (SSD) designed to
replace a conventional IDE hard disk drive. UDM SSD can be plugged into a standard Embedded USB
connector commonly found in desktops, portable PC systems and industrial PC systems. This product is
well suited for embedded flash storage applications offering new and expanded functionality as well as
more cost-effective designs, better performance and increased reliability.
1.1 Performance-optimized Controller
The heart of an UDM is the USB controller, which translates standard USB signals into the data and
controls of the flash media. This proprietary USB controller is specifically designed to attain high data
throughput from host to flash.
1.1.1 Power Management Unit (PMU)
The power management unit (PMU) controls the power consumption of the UDM. It can dramatically
extend product battery life by leaving the idle part of the circuitry into sleep mode. The PMU has zero
wake-up latency.
1.1.2 SRAM Buffer
The SRAM buffer is a key contributor to the USB controller performance. It optimizes data writes to the
flash.
1.1.3 Error Correction Code (ECC)
The UDM uses BCH Error Detection Code (EDC) and Error Correction Code (ECC) algorithms which
correct up to 24 random single-bit errors for each 1024-byte block of data depending on spare area of
flash memory. High performance is achieved through hardware-based error detection and correction.
1.1.4 Wear-Leveling
Flash memory can be erased a limited number of times, This number is called the erase cycle limit, or
write endurance limit, The erase cycle limit applies to each individual erase block in the flash device.
In a typical application, and especially if a file system is used, specific pages are constantly updated (e.g.,
the page that contains the FAT, registry, etc.). Without any special handling, these pages would wear out
more rapidly than other pages, reducing the lifetime of the entire flash.
To overcome this inherent deficiency, Apacer’s USB-Disk Module (UDM) uses wear-leveling algorithm.
This wear-leveling algorithm ensures that consecutive writes of a specific sector are not written physically
to the same page in the flash. This spreads flash media usage evenly across all pages, thereby
maximizing flash lifetime.
The wear-leveling mechanism provides more than 100,000 write/erase cycles for reliable data storage
over an extended period.
1.1.5 Write Protection Mode (Optional)
When the device is configured to the Write-Protection mode, it enhances the data security and protection.
This feature prevents the stored data from inadvertent system writes or erases, and viruses.
3
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
2. Functional Block Diagram
The USB-Disk Module (UDM) contains a controller, embedded firmware, and Flash Media with a female
connector. The UDM interfaces with the host system allowing data to be written to and read from the
Flash Media.
Flash
Media
Host
USB Interface
Flash
Management
Controller
Flash
Media
Figure 2-1: Functional block diagram
4
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
3. Pin Assignment
This chapter provides the information on the pin assignments and signal descriptions.
3.1 Type A, Type B, Type C, and Type E
Table 3-1: Pin Assignment of the 10-pin configuration in Type A, Type B, Type C, and Type E
Pin
Signal
Pin
Signal
1
+5V
2
N.C
3
USB D-
4
N.C
5
USB D+
6
N.C
7
GND
8
N.C
9
Key (Blocked)
10
N.C
5
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
3.2 Type D﹙
﹙STD﹚
﹚
Table 3-2: Pin Assignment of the 10-pin configuration in Type D (STD)
Pin
Signal
Pin
Signal
1
+5V
2
+5V
3
USB D-
4
N.C
5
USB D+
6
N.C
7
GND
8
GND
9
Key (Blocked)
10
GND
6
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
3.3 Type D﹙
﹙LP﹚
﹚
Table 3-3: Pin Assignment of the 10-pin configuration in Type D (LP)
Pin
Signal
Pin
Signal
1
+5V
2
N.C
3
USB D-
4
N.C
5
USB D+
6
N.C
7
GND
8
N.C
9
Key (Blocked)
10
N.C
7
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
4. Capacity Specifications
The USB-Disk Module product family is available as below table matrix.
Table 4-1: Capacity Specification
Density
Total Bytes
256MB
254,509,056
512 MB
512,458,752
1GB
1,028,358,144
2GB
2,060,156,928
4GB
4,120,920,064
8GB
8,248,131,584
4.1 Functional Specifications
Table 4-2: Performance Specifications
Capacity
256 MB
512 MB / 1 GB
2 GB
4 GB
8 GB
Sustained read (MB/s)
15
25
25
30
25
Sustained write (MB/s)
9
10
15
25
20
Performance
4.2 Environmental Specifications
Environmental specification of the USB-Disk Module (UDM) product family which follows the MIL-STD810F standards is available as shown in Table 4-2.
Table 4-2: Environmental Specifications
Temperature
Operation
Storage
0°C to 70°C (Std.); -40°C to 85°C (Ext. Temp.)
-40°C to 100°C
Vibration
10 Hz to 500 Hz, 15G, 3 axes, 30 minutes (IEC 68-2-6)
Shock
Duration: 11 ms, 50G, 3 axes, 18 times (IEC 68-2-27)
EMC
FCC, CE
8
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
5. Electrical Specification
Caution: Absolute Maximum Stress Ratings – Applied conditions greater than those listed under
“Absolute Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these conditions or conditions greater than those defined in
the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating
conditions may affect device reliability.
Table 5-1: Operating Range
Range
Ambient Temperature
Voltage
Standard
Extended Temperature
0°C to 70°C
-40°C to 85°C
4.5-5.5V
Table 5-2: Absolute maximum power pin stress ratings
Parameter
Power Supply Input
Voltage on any pin except VDD with respect to GND
Symbol
Min
Max
Unit
VDD- VSS
VIN
-0.3
–ss - 0.3
5.5
VDD +0.3
V
V
5.1 AC Characteristics
Table 5-3: AC Characteristics Full Speed
Parameter
Symbol
Min
Typ
Max
Unit
Rise Time
TFR
4
─
20
ns
Fall Time
TFF
4
─
20
ns
Differential Rise and
Fall Time Matching
TFRFM
90
111.11
%
Driver Output
Resistance
ZDRV
28
44
Ω
─
Table 5-4: AC Characteristics High Speed
Parameter
Symbol
Min
Typ
Max
Unit
Rise Time (10%~90%)
THSR
500
─
─
ps
Fall Time (10%~90%)
THSF
500
─
─
ps
Driver Output
Resistance
ZHSDRV
40.5
─
49.5
Ω
9
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
6. Physical Dimension
6.1 Horizontal Design
6.1.1 Type A (STD 90D)
Standard 90 degree
Length
28.8mm
Width
26.65mm
Height (Max)
10.5 mm
Unit: mm
Tolerance: ±0.2
10
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
6.1.2 Type B (STD 90D-MH)
Standard 90 Degree Mounting Header
Length
37.8mm
Width
26.65mm
Height (Max)
10.5 mm
Unit: mm
Tolerance: ±0.2
11
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
6.1.3 Type C (STD 90D-MS)
Standard 90 Degree Mounting Screw
Length
37.8mm
Width
26.65mm
Height (Max)
10.5 mm
Unit: mm
Tolerance: ±0.2
12
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
6.2 Vertical Design
6.2.1 Type D (STD 180D)
Standard 180 Degree
Length
37.3mm
Width
26.65mm
Height (Max)
8.5 mm
Unit: mm
Tolerance: ±0.2
13
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
6.3 Low Profile Design
6.3.1 Type D (LP 180D)
Low Profile 180 Degree
Length
31.95mm
Width
24mm
Height (Max)
5 mm
Unit: mm
Tolerance: ±0.2
14
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
6.3.2 Type E (LP 90D-MS)
Low Profile 90 Degree Mounting Screw
Length
Write Protect
36.8mm
Width
26.5mm
Height (Max)
7.5 mm
Read/Write
Unit: mm
Tolerance: ±0.2
15
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
7. Product Ordering Information
7.1 Product Code Designation
AP – UM xxxx X
X
X
X
X – XX XX X
Flash Type:
Blank: SA SLC
T: Toshiba SLC
Option:
RB: Ready Boost
WP: Write Protection
NR: Non-Removable
MS: Mounting Screw
MH: Mounting Header
S: Halogen-free Compliant
R: RoHS Compliant
Temperature:
C: Commercial Temperature
E: Extended Temperature
PCB version
Dimension
1 = 90D STD
2 = 180D STD
3 = 90D Low Profile
4 = 180D Low Profile
Solution version
Capacities:
256M = 256MB
512M = 512MB
001G =
1GB
002G =
2GB
004G =
4GB
008G =
8GB
Model Name
Apacer Product Code
16
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
7.2 Valid Combinations
7.2.1 Type A (STD 90D)
Standard 90 degree
Capacity
Standard
Extended Temperature
256MB
AP-UM256MN10CS
AP-UM256MQ10ES
512MB
AP-UM512MN10CS
AP-UM512MQ10ES
1GB
AP-UM001GN10CS
AP-UM001GQ10ES
2GB
AP-UM002GN10CS
AP-UM002GQ10ES
4GB
AP-UM004GN10CS
AP-UM004GQ10ES
8GB
AP-UM008GN10CS-T
AP-UM008GQ10ES-T
7.2.2 Type B (STD 90D-MH)
Standard 90 Degree Mounting Header
Capacity
Standard
Extended Temperature
256MB
AP-UM256MN10CS-MH
AP-UM256MQ10ES-MH
512MB
AP-UM512MN10CS-MH
AP-UM512MQ10ES-MH
1GB
AP-UM001GN10CS-MH
AP-UM001GQ10ES-MH
2GB
AP-UM002GN10CS-MH
AP-UM002GQ10ES-MH
4GB
AP-UM004GN10CS-MH
AP-UM004GQ10ES-MH
8GB
AP-UM008GN10CS-MHT
AP-UM008GQ10ES-MHT
7.2.3 Type C (STD 90D-MS)
Standard 90 Degree Mounting Screw
Capacity
Standard
Extended Temperature
256MB
AP-UM256MN10CS-MS
AP-UM256MQ10ES-MS
512MB
AP-UM512MN10CS-MS
AP-UM512MQ10ES-MS
1GB
AP-UM001GN10CS-MS
AP-UM001GQ10ES-MS
2GB
AP-UM002GN10CS-MS
AP-UM002GQ10ES-MS
4GB
AP-UM004GN10CS-MS
AP-UM004GQ10ES-MS
8GB
AP-UM008GN10CS-MST
AP-UM008GQ10ES-MST
17
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
7.2.4 Type D (STD 180D)
Standard 180 Degree
Capacity
Standard
Extended Temperature
256MB
AP-UM256MN20CS
AP-UM256MQ20ES
512MB
AP-UM512MN20CS
AP-UM512MQ20ES
1GB
AP-UM001GN20CS
AP-UM001GQ20ES
2GB
AP-UM002GN20CS
AP-UM002GQ20ES
4GB
AP-UM004GN20CS
AP-UM004GQ20ES
8GB
AP-UM008GN20CS-T
AP-UM008GQ20ES-T
7.2.5 Type D (LP 180D)
Low Profile 180 Degree
Capacity
Standard
Extended Temperature
256MB
AP-UM256MN40CG
AP-UM256MQ40EG
512MB
AP-UM512MN40CG
AP-UM512MQ40EG
1GB
AP-UM001GN40CG
AP-UM001GQ40EG
2GB
AP-UM002GN40CG
AP-UM002GQ40EG
4GB
AP-UM004GN40CG
AP-UM004GQ40EG
8GB
AP-UM008GN40CG-T
AP-UM008GQ40EG-T
7.2.6 Type E (LP 90D-MS)
Low Profile 90 Degree Mounting Screw
Capacity
Standard
Extended Temperature
256MB
AP-UM256MN31CG-MS
AP-UM256MQ31EG-MS
512MB
AP-UM512MN31CG-MS
AP-UM512MQ31EG-MS
1GB
AP-UM001GN31CG-MS
AP-UM001GQ31EG-MS
2GB
AP-UM002GN31CG-MS
AP-UM002GQ31EG-MS
4GB
AP-UM004GN31CG-MS
AP-UM004GQ31EG-MS
8GB
AP-UM008GN31CG-MST
AP-UM008GQ31EG-MST
Note: Valid combinations are those products in mass production or will be in mass production. Consult
your Apacer sales representative to confirm availability of valid combinations and to determine availability
of new combinations.
18
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
Revision History
Revision
Description
Date
1.0
Official Release
May 16, 2011
1.1
Revised Capacity Specifications
May 24, 2011
19
© 2011 Apacer Technology, Inc.
Rev. 1.1
USB-Disk ModuleⅡPlus
AP-UMxxxxXXXXX-XXXXX
Global Presence
Taiwan (Headquarters)
Apacer Technology Inc.
th
th
4 Fl., 75 Xintai 5 Rd., Sec.1
Hsichih, New Taipei City
Taiwan 221
R.O.C.
Tel: +886-2-2698-2888
Fax: +886-2-2698-2889
[email protected]
U.S.A.
Apacer Memory America, Inc.
386 Fairview Way, Suite102,
Milpitas, CA 95035
Tel: 1-408-586-1291
Fax: 1-408-935-9611
[email protected]
Japan
Apacer Technology Corp.
5F, Matsura Bldg., Shiba, Minato-Ku
Tokyo, 105-0014, Japan
Tel: 81-3-5419-2668
Fax: 81-3-5419-0018
[email protected]
Europe
Apacer Technology B.V.
Europalaan 89
5232 BC 'S-Hertogenbosch
The Netherlands
Tel: 31-73-645-9620
Fax: 31-73-645-9629
[email protected]
China
Apacer Electronic (Shanghai) Co., Ltd
1301, No.251,Xiaomuqiao Road, Shanghai,
200032, China
Tel: 86-21-5529-0222
Fax: 86-21-5206-6939
[email protected]
India
Apacer Technologies Pvt. Ltd.
#143, 1st Floor, Raheja Arcade,
5th Block Kormangala Industrial Layout,
Bangalore - 560095, India
Tel: 91-80-4152-9061
[email protected]
20
© 2011 Apacer Technology, Inc.
Rev. 1.1
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apacer:
AP-UM256MN10CS AP-UM256MN10CS-MH AP-UM256MN10CS-MS AP-UM256MN20CS AP-UM256MN40CG
AP-UM256MN31CG-MS AP-UM256MQ10ES AP-UM256MQ10ES-MH AP-UM256MQ10ES-MS AP-UM256MQ20ES
AP-UM256MQ40EG AP-UM256MQ31EG-MS AP-UM512MN10CS AP-UM512MN10CS-MH AP-UM512MN10CS-MS
AP-UM512MN20CS AP-UM512MN40CG AP-UM512MN31CG-MS AP-UM512MQ10ES AP-UM512MQ10ES-MH APUM512MQ10ES-MS AP-UM512MQ20ES AP-UM512MQ40EG AP-UM512MQ31EG-MS AP-UM001GN10CS APUM001GN10CS-MH AP-UM001GN10CS-MS AP-UM001GN20CS AP-UM001GN40CG AP-UM001GN31CG-MS APUM001GQ10ES AP-UM001GQ10ES-MH AP-UM001GQ10ES-MS AP-UM001GQ20ES AP-UM001GQ40EG APUM001GQ31EG-MS AP-UM002GN10CS AP-UM002GN10CS-MH AP-UM002GN10CS-MS AP-UM002GN20CS APUM002GN40CG AP-UM002GN31CG-MS AP-UM002GQ10ES AP-UM002GQ10ES-MH AP-UM002GQ10ES-MS APUM002GQ20ES AP-UM002GQ40EG AP-UM002GQ31EG-MS AP-UM004GN10CS AP-UM004GN10CS-MH APUM004GN10CS-MS AP-UM004GN20CS AP-UM004GN40CG AP-UM004GN31CG-MS AP-UM004GQ10ES APUM004GQ10ES-MH AP-UM004GQ10ES-MS AP-UM004GQ20ES AP-UM004GQ40EG AP-UM004GQ31EG-MS APUM008GN10CS-T AP-UM008GN10CS-MHT AP-UM008GN10CS-MST AP-UM008GN20CS-T AP-UM008GN40CG-T
AP-UM008GN31CG-MST AP-UM008GQ10ES-T AP-UM008GQ10ES-MHT AP-UM008GQ10ES-MST APUM008GQ20ES-T AP-UM008GQ40EG-T AP-UM008GQ31EG-MST
Similar pages