Lumileds L2C5-27HG1204E1300 Fashion retail lighting that makes an impact, highlighting rich colors and increasing contrast Datasheet

Illumination
LUXEON CoB with
CrispColor Technology™
Fashion retail lighting that makes an impact, highlighting rich
colors and increasing contrast
The LUXEON CoB with CrispColor Technology LED is the ultimate solution
that makes colors pop and makes fabrics come to life. With efficient
solid state lighting technology, the contrast of colors has never been so
vivid. Our special phosphor technology has created a higher gamut color
rendering than existing solutions with a specific color point below the
Black Body Line to allow for Class A products. Combined with industry
leading performance, LUXEON CoB with CrispColor Technology creates
a highly impactful retail experience with all of the advantages of our
LUXEON CoB range, including lowest Rth, small Light Emitting Surface (LES)
and 3-step MacAdam ellipse color definition, which is tested at 85°C.
Features and BENEFITS
Primary Applications
Highest flux densities with industry’s smallest Light Emitting Surface (LES)
Downlights
3-step MacAdam ellipse color definition: Freedom from Binning
for color consistency from luminaire to luminaire
Up to 4x lower thermal resistance than competition, enabling smaller
heatsinks and higher lumens
Supported by a comprehensive optical, mechanical and electrical ecosystem
PB165 LUXEON CoB with CrispColor Technology Product Brief ©2016 Lumileds Holding B.V. All rights reserved.
Indoor Area Lighting
Lamps
Spotlights
LUXEON CoB with CrispColor Technology product performance at specified test current, Tj=85°C.
Product
LUXEON
CoB
1202s
LUXEON
CoB
1202
LUXEON
CoB
1203
LUXEON
CoB
1204
LUXEON
CoB
1205
LUXEON
CoB
1208
Luminous Flux [1] (lm)
Test
Current
(mA)
LES
(mm)
Part Number
Minimum
Typical
Typical
Luminous
Efficacy (lm/W)
90
588
653
95
200
6
L2C5-27HG1202E0600
3000K
90
648
700
101
200
6
L2C5-30HG1202E0600
3250K
90
675
720
104
200
6
L2C5-33HG1202E0600
3500K
90
656
729
106
200
6
L2C5-35HG1202E0600
4000K
90
690
767
111
200
6
L2C5-40HG1202E0600
5000K
90
716
796
115
200
6
L2C5-50HG1202E0600
2700K
90
613
681
99
200
9
L2C5-27HG1202E0900
3000K
90
648
720
104
200
9
L2C5-30HG1202E0900
3250K
90
675
750
109
200
9
L2C5-33HG1202E0900
3500K
90
683
759
110
200
9
L2C5-35HG1202E0900
4000K
90
720
800
116
200
9
L2C5-40HG1202E0900
Nominal
CCT
Minimum
CRI [1, 2, 3]
2700K
5000K
90
748
831
120
200
9
L2C5-50HG1202E0900
2700K
90
907
1008
97
300
9
L2C5-27HG1203E0900
3000K
90
972
1080
104
300
9
L2C5-30HG1203E0900
3250K
90
1017
1130
109
300
9
L2C5-33HG1203E0900
3500K
90
1035
1150
111
300
9
L2C5-35HG1203E0900
4000K
90
1066
1184
114
300
9
L2C5-40HG1203E0900
5000K
90
1106
1229
119
300
9
L2C5-50HG1203E0900
2700K
90
1424
1582
101
450
13
L2C5-27HG1204E1300
3000K
90
1494
1660
106
450
13
L2C5-30HG1204E1300
3250K
90
1575
1750
112
450
13
L2C5-33HG1204E1300
3500K
90
1594
1771
113
450
13
L2C5-35HG1204E1300
4000K
90
1656
1840
117
450
13
L2C5-40HG1204E1300
5000K
90
1737
1930
123
450
13
L2C5-50HG1204E1300
2700K
90
1850
2055
98
600
13
L2C5-27HG1205E1300
3000K
90
1953
2170
103
600
13
L2C5-30HG1205E1300
3250K
90
2034
2260
108
600
13
L2C5-33HG1205E1300
3500K
90
2070
2300
110
600
13
L2C5-35HG1205E1300
4000K
90
2172
2413
115
600
13
L2C5-40HG1205E1300
5000K
90
2255
2506
119
600
13
L2C5-50HG1205E1300
2700K
90
2775
3083
98
900
15
L2C5-27HG1208E1500
3000K
90
2970
3300
105
900
15
L2C5-30HG1208E1500
3250K
90
3105
3450
110
900
15
L2C5-33HG1208E1500
3500K
90
3105
3450
110
900
15
L2C5-35HG1208E1500
4000K
90
3263
3626
116
900
15
L2C5-40HG1208E1500
5000K
90
3389
3766
120
900
15
L2C5-50HG1208E1500
Notes:
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. R9 value of 90CRI products is >50.
PB165 LUXEON CoB with CrispColor Technology Product Brief 20161102 ©2016 Lumileds Holding B.V. All rights reserved.
2
LUXEON CoB with CrispColor Technology product performance at specified test current, Tj=85°C (continued).
Product
Nominal
CCT
Minimum
CRI [1, 2, 3]
2700K
90
LUXEON
CoB
1211
LUXEON
CoB
1216
Luminous Flux [1] (lm)
Test
Current
(mA)
LES
(mm)
Part Number
19
L2C5-27HG1211E1900
Minimum
Typical
Typical
Luminous
Efficacy (lm/W)
3803
4226
101
1200
3000K
90
4023
4470
107
1200
19
L2C5-30HG1211E1900
3250K
90
4190
4656
111
1200
19
L2C5-33HG1211E1900
3500K
90
4264
4738
113
1200
19
L2C5-35HG1211E1900
4000K
90
4466
4962
119
1200
19
L2C5-40HG1211E1900
5000K
90
4638
5153
123
1200
19
L2C5-50HG1211E1900
2700K
90
4994
5549
101
1600
23
L2C5-27HG1216E2300
3000K
90
5273
5859
106
1600
23
L2C5-30HG1216E2300
3250K
90
5492
6102
111
1600
23
L2C5-33HG1216E2300
3500K
90
5589
6210
113
1600
23
L2C5-35HG1216E2300
4000K
90
5864
6515
118
1600
23
L2C5-40HG1216E2300
5000K
90
6089
6766
123
1600
23
L2C5-50HG1216E2300
Notes (continued):
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. R9 value of 90CRI products is >50.
Mechanical Dimensions.
L2C2-xxxx1204E1300
R1.6
2x
16±0.2
3.5
L2C2-xxxx1205E1
L2C2-xxxx1203E0900
L2C2-xxxx1202E0900
R1.6
2x
R1.6
2x
16±0.2
3.5
3.5
3.5
4.5
R1.6
2x
3.5
+0.5
9 - 0.1
CL
CL
24±0.2
xxxx 1203
1±0.1
6
8
0.1
2
CL
3.5
CL
2
2
xxxx 1204
1±0.1
3.5
3.5
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
6
0.5±0.2
L2C5-xxHG1202E0600
DRAW N BY
DATE
T. VU / R. HELBING
2013-01-24
ENGINEER/CHECKER
DATE
YYYY-MM-DD
L2C5-xxHG1202E0900
UNLESS OTHERW ISE SPECIFIED
TITLE
° DIMENSIONS ARE IN MILLIMETERS
DO NOT SCALE THIS
GD&T SYMBOLOGY
PER
METRIC
1
° THIRD ANGLE PROJECTION
ASME Y14.5M-1994
DRAW ING
OF
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
1
2013-01-24
DRAW N BY
DATE
T. VU / R. HELBING
2013-01-24
ENGINEER/CHECKER
DATE
YYYY-MM-DD
16x19 LES9
COB DATASHEET
DRAWING
L2C5-xxHG1203E0900
B
5:1
DO NOT SCALE THIS
DRAW ING
UNLESS OTHERW ISE SPECIFIED
TITLE
° DIMENSIONS ARE IN MILLIMETERS
METRIC
SIZE
SCALE
T. VU
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
FRAME DATE: 2011-04-18
SHEET
GD&T SYMBOLOGY
PER
1
° THIRD ANGLE PROJECTION
ASME Y14.5M-1994
5:1
SCALE
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
B
SIZE
METRIC
DRAW ING
4.5
L2C2-xxxx1205E1300
R1.6
2x
3.5
4.5
L2C2-xxxx1208E1500
4.5
R1.6
2x
3.5
DATE
YYYY-MM-DD
GD&T SYMBOLOGY
PER
TITLE
CL
CL
1
OF
B
5:1
SHEET
SCALE
SIZE
9.4
3.2
11.4
12
3.2
2
0.1
17.5±0.3
CL
24±0.2
FRAME DATE: 2011-04-18
1
° THIRD ANGLE PROJECTION
ASME Y14.5M-1994
11.4
8
6.4 9.4
2
CL
20x24 LES13
UNLESS OTHERW ISE SPECIFIED
2
+0.5
15 - 0.1
8
DATE
2013-01-24
ENGINEER/CHECKER
xxxx 1216
+0.5
13 - 0.1
8
2013-01-24
DRAW N BY
T. VU / R. HELBING
CL
24±0.2
CL
CL
CL
28±0.2
CL
CL
12
8
8.5
8
8.5
xxxx 1205
2
1±0.1
20±0.2
3.5
xxxx 1208
2
CL
7.5
7.5
4.5
20±0.2
0.5±0.2
4.5
7.5
2013-01-24
DRAW N BY
DATE
T. VU / R. HELBING
2013-01-24
ENGINEER/CHECKER
DATE
UNLESS OTHERW ISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
° THIRD ANGLE PROJECTION
YYYY-MM-DD
20x24 LES13
COB DATASHEET
DRAWING
L2C5-xxHG1205E1300
TITLE
1
FRAME DATE: 2011-04-18
OF
SHEET
1
5:1
SCALE
B
SIZE
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
0.5±0.2
T. VU
2013-01-24
DRAW N BY
DATE
T. VU / R. HELBING
2013-01-24
ENGINEER/CHECKER
DATE
YYYY-MM-DD
20x24 LES15
COB DATASHEET
DRAWING
L2C5-xxHG1208E1500
LINEAR:
ANGULAR:
XX. ±0.2 mm
XX
±1°
XX.X ±0.1 mm XX.X ±0°30'
XX.XX ±0.05 mm XX.XX ±0°00'30"
DO NOT SCALE THIS
METRIC
DRAW ING
UNLESS OTHERW ISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
GD&T SYMBOLOGY
PER
° THIRD ANGLE PROJECTION
ASME Y14.5M-1994
9.4
11.4
0.5±0.2
1±0.1
25±0.3
1±0.1
20±0.2
0.5±0.2
+0.5
23 - 0.1
3.2
2
CL
3.5
1±0.1
28±0.2
TOLERANCES
T. VU
11.4
2
2
xxxx 1204
CL
4.5
9.4
8.5
TITLE
1
OF
SHEET
1
FRAME DATE: 2011-04-18
5:1
SCALE
B
SIZE
MMW
1/20/14
DRAWN BY
RENE/THUY
DATE
YYYY-MM-DD
1/20/14
28X28 LES19
COB DATA SHEET
DRAWING
L2C5-xxHG1211E1900
ENGINEER/CHECKER
DATE
UNLESS OTHERWISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
DO NOT SCALE THIS
METRIC
DRAWING
GD&T SYMBOLOGY
PER
ASME Y14.5M-1994
TITLE
° THIRD ANGLE PROJECTION
-
MATERIAL
-
FINISH
1
FRAME DATE: 2013-05-10
OF
SHEET
1
4:1
SCALE
B
SIZE
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
MMW
DRAW N BY
7/8/14
YYYY-MM-DD
DATE
28X28 LES23
COB DATA SHEET
DRAWING
L2C5-xxHG1216E2300
LINEAR:
ANGULAR:
XX.
0.2mm XX
1
XX.X
0.1mm XX.X
0 30'
XX.XX
0.05mm XX.XX 0 00'30"
TOLERANCE TYPE
DO NOT SCALE THIS
GD&T SYMBOLOGY
PER
METRIC
DRAW ING
ASME Y14.5M-1994
RENE/THUY
ENGINEER/CHECKER
7/8/14
DATE
UNLESS OTHERW ISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
° THIRD ANGLE PROJECTION
° ADHERENCE TO DW G A-5951-1561-1
(COMPANY STD. SECTION 608) AND
A-5951-1745-1 (GSE) IS REQUIRED
YYYY-MM-DD
TITLE
1
FRAM E DATE: 2007-06-29
OF
SHEET
1
N/A
SHEET SCALE
B
SIZE
Notes:
1. Drawings are not scale.
2. All dimensions are in millimeters.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
PB165 LUXEON CoB with CrispColor Technology
Product Brief 20161102
4.5
20±0.2
CL
2x
xxxx 1211
0.1
2
T. VU
° DIMENSIONS ARE IN MILLIMETERS
CL
0.1
15.5±0.3
3.5
0.5±0.2
L2C2-xxxx1211E1900
2X
3.5
0.1
2
CL
1±0.1
7.5
COB DATASHEET
L2C5-xxHG1204E1300
DRAWING
FRAME DATE: 2011-04-18
1
OF
SHEET
DO NOT SCALE THIS
C2-xxxx1204E1300
xx
2
CL
4.5
20±0.2
16x19 LES9
COB DATASHEET
DRAWING
2013-01-24
8
2
CL
0.5±0.2
T. VU
24±0.2
8.5
3.5
TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
CL
6
6.5
2
xxxx 1202
3.5
CL
CL
0.1
2
+0.5
13 - 0.1
8
6.5
19±0.2
6
6.5
+0.5
13 - 0.1
11.3±0.3
6.5
15.5±0.3
2
2
2
+0.5
9 - 0.1
11.3±0.3
19±0.2
4.5
0.1
15.5±0.3
Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct,
indirect or consequential, resulting from the use of the provided information and data. Although
Lumileds Holding B.V. has attempted to provide the most accurate information and data, the
materials and services information and data are provided “as is” and Lumileds Holding B.V.
neither warranties, nor guarantees the contents and correctness of the provided information
and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user
agree to this disclaimer and user agreement with the download or use of the provided materials,
information and data.
Similar pages