Vishay MDP1403680KFE04 Thick film resistor networks, dual-in-line, molded dip, 01, 03, 05 schematic Datasheet

MDP 01, 03, 05
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
FEATURES
• 0.160" [4.06 mm] maximum seated height and
rugged, molded case construction
• Thick film resistive elements
• Low temperature coefficient (- 55 °C to + 125 °C)
± 100 ppm/°C
• Reduces total assembly costs
• Compatible with automatic insertingþequipment
• Wide resistance range (10 Ω to 2.2 MΩ)
• Uniform performance characteristics
• Available in tube pack
• Lead (Pb)-free version is RoHS compliant
Available
e1
RoHS*
COMPLIANT
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
NO. OF
PINS
SCHEMATIC
RESISTOR
POWER RATING
Max. AT 70 °C
W
01
03
05
0.125
0.250
0.125
MDP 14
RESISTANCE
RANGE
STANDARD
TOLERANCE
Ω
±%
TEMPERATURE
TCR
COEFFICIENT
TRACKING**
(- 55 °C to + 125 °C) (- 55 °C to + 125 °C)
ppm/°C
ppm/°C
10 - 2.2M
10 - 2.2M
± 2 (± 1, ± 5)***
Consult factory
01
0.125
10 - 2.2M
03
0.250
10 - 2.2M
± 2 (± 1, ± 5)***
05
0.125
Consult factory
* For resistor power ratings at + 25 °C see derating curves
** Tighter tracking available
*** ± 1 % and ± 5 % tolerences available on request
MDP 16
WEIGHT
g
± 100
± 50
± 50
± 100
1.3
± 100
± 50
± 50
± 100
1.5
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MDP1403100RGD04 (preferred part numbering format)
M
GLOBAL
MODEL
MDP
D
P
PIN COUNT
1
4
0
3
1
0
0
R
G
RESISTANCE
TOLERANCE
VALUE
CODE
14 = 14 Pin
01 = Bussed
R = Decimal
F=±1%
G=±2%
16 = 16 Pin
03 = Isolated
K =Thousand
00 = Special
M = Million
J=±5%
10R0 = 10 Ω
S = Special
680K = 680 k Ω
1M00 = 1.0 MΩ
Historical Part Number example: MDP1403101G (will continue to be accepted)
D
SCHEMATIC
0
4
PACKAGING
SPECIAL
E04 = Lead (Pb)-free, Tube
D04 = Tin/Lead,Tube
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
as applicable
MDP
14
03
101
G
D04
HISTORICAL
MODEL
PIN COUNT
SCHEMATIC
RESISTANCE
VALUE
TOLERANCE
CODE
PACKAGING
New Global Part Numbering: MDP1405121CGD04 (preferred part numbering format)
M
GLOBAL
MODEL
MDP
D
P
PIN COUNT
1
4
0
5
1
2
1
C
G
RESISTANCE
TOLERANCE
VALUE
CODE
14 = 14 Pin
05 = Dual
3 digit
F=±1%
G=±2%
16 = 16 Pin
Terminator
Impedance code
followed by
J=±5%
Alpha modifier
(see Impedence
codes table)
Historical Part Number example: MDP1405221271G (will continue to be accepted)
D
SCHEMATIC
0
4
PACKAGING
SPECIAL
E04 = Lead (Pb)-free, Tube
D04 = Tin/Lead,Tube
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
as applicable
MDP
14
05
221
271
G
D04
HISTORICAL
MODEL
PIN COUNT
SCHEMATIC
RESISTANCE
VALUE 1
RESISTANCE
VALUE 2
TOLERANCE
CODE
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
1
For technical questions contact: [email protected]
Document Number: 31511
Revision: 28-Jul-06
MDP 01, 03, 05
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
Vishay Dale
DIMENSIONS in inches [millimeters]
0.310 ± 0.010
[7.87 ± 0.254]
0.120 ± 0.005
[3.05 ± 0.127]
A ± 0.010 [0.254]
0.250 ± 0.005
[6.35 ± 0.127]
0.030
[0.762] Typ.
Pin #1
Identification
0.075 ± 0.015
[1.90 ± 0.381]
Pin #1
0.100 ± 0.010
[2.54 ± 0.254]
Non-Accumulative Tol.
"C" Spaces
GLOBAL MODEL
0.010 + 0.005
- 0.002
[0.254 + 0.127
- 0.051]
0.130 + 0.015
- 0.010
[3.30 + 0.381
- 0.254]
0.018 ± 0.003
[0.457 ± 0.076]
0.290 Min.
0.320 Nom.
0.360 Max.
[7.37 Min.
8.13 Nom.
9.14 Max.]
0.050 ± 0.005
[1.27 ± 0.127]
B ± 0.010 [0.254]
A
B
C
MDP 14
0.750 [19.05]
0.600 [15.24]
6
MDP 16
0.850 [21.59]
0.700 [17.78]
7
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
MDP14
MDP16
Package Power Rating (Maximum at + 70 °C)
W
1.73
1.92
Voltage Coefficient of Resistance
Veff
< 50 ppm typical
Dielectric Strength
VAC
200
Insulation Resistance
Ω
> 10 000M minimum
Operating Temperature Range
°C
- 55 to + 125
Storage Temperature Range
°C
- 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents:
Solderability:
Body:
Terminals:
Weight:
Document Number: 31511
Revision: 28-Jul-06
Permanency testing per MIL-STD-202, Method 215
Per MIL-STD-202, Method 208E
Molded epoxy
Solder plated leads
14 pin = 1.3 grams; 16 pin = 1.5 grams
For technical questions contact: [email protected]
www.vishay.com
2
MDP 01, 03, 05
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
Vishay Dale
IMPEDANCE CODES
CODE
R1(Ω)
R2(Ω)
CODE
R1(Ω)
R2(Ω)
500B
82
130
141A
270
270
750B
120
200
181A
330
390
800C
130
210
191A
330
470
990A
160
260
221B
330
680
101C
180
240
281B
560
560
111C
180
270
381B
560
1.2K
121B
180
390
501C
620
2.7K
121C
220
270
102A
1.5K
3.3K
131A
220
330
202B
3K
6.2K
CIRCUIT APPLICATIONS
01 SCHEMATIC
13 and 15 resistors with one pin common
The MDPXX01 circuit provides a choice of 13 and 15 nominally equal
resistors, each connected between a common pin (14 and 16) and a
discrete PC board pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down
• TTL Input Pull-down
• Open Collector Pull-up
• Digital Pulse Squaring
• "Wired OR" Pull-up
• TTL Unused Gate Pull-up
• Power Driven Pull-up
• High Speed Parallel Pull-up
• • • • • • • •
MDP1401
Pin #1
MDP1601
03 SCHEMATIC
7 and 8 isolated resistors
The MDPXX03 provides a choice of 7 and 8 nominally equal resistors,
each resistor isolated from all others and wired directly across.
Commonly used in the following applications:
• "Wired OR" Pull-up
• Long-line Impedance Balancing
• Power Driven Pull-up
• LED Current Limiting
• Powergate Pull-up
• ECL Output Pull-down
• Line Termination
• TTL Input Pull-down
MDP1403
Pin #1
MDP1603
05 SCHEMATIC
TTL dual-line terminator; pulse squaring
R1
R1
R2
R1
R2
Pin #1
R1
R2
R1
R2
R1
R2
R1
R2
R2
R1
R1
R1
R2 R2
R2
R2
R1
R1
R1
R1
R2
R2
The MDPXX05 circuit contains 12 and 14 series pair of resistors.
Each series pair is connected between ground and a common line.
The junction of these resistor pairs is connected to the input terminals.
R2
MDP1405, MDP1605
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
Standard E-24 resistance values stocked. Consult factory
www.vishay.com
3
For technical questions contact: [email protected]
Document Number: 31511
Revision: 28-Jul-06
MDP 01, 03, 05
Power Rating (Watts)
Thick Film Resistor Networks, Dual-In-Line,
Molded DIP, 01, 03, 05 Schematics
3.00
2.70
Vishay Dale
16 Pin Package
14 Pin Package
Single Resistor
0.380
0.190
03
01 and 05
- 50
+ 25
Derating
+ 70
+ 125 + 150
Ambient Temperature °C
PERFORMANCE
MAX. ΔR
(Typical Test Lots)
TEST
CONDITIONS
Power Conditioning
1.5 rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours
± 4 hours at + 25 °C ambient temperature
± 0.50 % ΔR
Thermal Shock
5 cycles between - 65 °C and + 125 °C
± 0.50 % ΔR
Short Time Overload
2.5 x rated working voltage 5 seconds
± 0.25 % ΔR
Low Temperature Operation
45 minutes at full rated working voltage at - 65 °C
± 0.25 % ΔR
Moisture Resistance
240 hours with humidity ranging from 80 % RH to 98 % RH
± 0.50 % ΔR
Resistance to Soldering Heat
Leads immersed in + 350 °C solder to within 1/16" of device body for
3 seconds
± 0.25 % ΔR
Shock
Total of 18 shocks at 100 G's
± 0.25 % ΔR
Vibration
12 hours at maximum of 20 G's between 10 and 2000 Hz
± 0.25 % ΔR
Load Life
1000 hours at + 70 °C, rated power applied 1.5 hours “ON, 0.5 hour “OFF”
for full 1000 hour period. Derated according to the curve.
± 1.00 % ΔR
Terminal Strength
4.5 pound pull for 30 seconds
± 0.25 % ΔR
Insulation Resistance
10 000 Megohm (minimum)
-
Dielectric Withstanding Voltage
No evidence of arcing or damage (200 VRMS for 1 minute)
-
Document Number: 31511
Revision: 28-Jul-06
For technical questions contact: [email protected]
www.vishay.com
4
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages