ATC 920 C Series X7R Ceramic RF Power Multilayer Capacitors • Case C Size (.250" x .250") • Capacitance Range 0.01 µF to 1 µF • Low ESR/ESL • Non Magnetic • Rugged Construction • High Reliability • Manufactured for ATC • Mid-K • RoHS Compliant ATC’s 920C Series MLC capacitors offer superior quality at a competitive price. This MLC Series is manufactured for ATC in accordance with ATC’s high quality standards. Ceramic construction provides a rugged and reliable hermetic package. Available termination styles include a standard solder plate over a nickel barrier for most applications and palladium silver for non-magnetic applications commonly used in medical electronics. Typical functional applications: Bypass, Coupling, and DC Blocking. Typical circuit applications: HF Amplifiers, Switching Mode Power Supplies (SMPS), High Frequency SMPS Filters. ELECTRICAL AND MECHANICAL SPECIFICATIONS DISSIPATION FACTOR (DF): 2.5% max. at 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): Less than ±15% (-55°C to +125°C) INSULATION RESISTANCE (IR): 0.01 MFd to 1 MFd 1000 megohms min. @ +25°C at rated WVDC. 100 megohms min. @ +125°C at rated WVDC. WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2. ENVIRONMENTAL TESTS ATC 920 C Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: DIELECTRIC WITHSTANDING VOLTAGE (DWV): Case C: 250% of rated WVDC for 5 secs. AGING EFFECTS: 3% maximum per decade hour. PIEZOELECTRIC EFFECTS: Negligible MIL-STD-202, Method 107, Condition A. DIELECTRIC ABSORPTION: 2% typical MOISTURE RESISTANCE: OPERATING TEMPERATURE RANGE: MIL-STD-202, Method 106. -55°C to +125°C (No derating of working voltage). LOW VOLTAGE HUMIDITY: TERMINATION STYLE: W Termination – Solder Plate. MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85°C with 85% relative humidity for 240 hours min. T Termination – Tin Plated over Nickel Barrier TN Termination – Tin Plated over Non-Magnetic Barrier CN Termination (Non-Magnetic) Palladium Silver See Mechanical Configuration Table, page 2. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125°C. 200% WVDC applied. TERMINAL STRENGTH: Terminations for chips, withstand a pull of 10 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-959 Rev D; 4/12 ATC 920 C Capacitance Values CAP. CODE 103 153 223 333 473 683 104 154 CAP. (MFd) .010 .015 .022 .033 .047 .068 .10 .15 TOL. RATED WVDC 300 K, M 250 200 CAP. CODE 224 334 474 684 824 105 – – CAP. (MFd) .22 .33 .47 .68 82 1.0 – – TOL. RATED WVDC 200 150 K, M 100 – VRMS = 0.707 X WVDC ATC PART NUMBER CODE ATC 920 C 10 5 M W 100 T Series Packaging T - Tape and Reel S - Strip Tape Case Size Capacitance Code: First 2 significant digits for capacitance. Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Capacitance Tolerance See Table at right Termination Code CAPACITANCE TOLERANCE M Code K Tol. ±10% ±20% The above part number refers to a 920 C Series (case size C) 1.0 MFd capacitor, M tolerance (±20%), 100 WVDC, with W termination (solder plate) and Tape and Reel Packaging. ATC 920 C Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE OUTLINES CASE SIZE & TYPE W/T IS A TERMINATION SURFACE Y 920C W C Solder Plate 920C T C Solderable Nickel Barrier BODY DIMENSIONS – Inches (mm) W L Y W L LEAD AND TERMINATION DIMENSIONS AND MATERIALS THICKNESS (T) OVERLAP (Y) T 0.22 +.020 -.010 .250 ±.01 (5.58 (6.35 ±0.25) +0.51 -0.25) .157 (3.98) max. .045 (1.14) max. T 0.22 +.020 -.010 .250 ±.01 (5.58 (6.35 ±0.25) +0.51 -0.25) .157 (3.98) max. .045 (1.14) max. LENGTH (L) WIDTH (W) MATERIALS SOLDER PLATE Nickel barrier, solder plated. Rugged high performance termination for lower cost, high volume applications RoHS Compliant Tin Plated over Nickel Barrier Termination ATC 920 C Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE OUTLINES CASE SIZE & TYPE Y 920C 920C CN TN W/T IS A TERMINATION SURFACE C Non-Mag Chip C Non-Mag Solderable Nickel Barrier BODY DIMENSIONS – Inches (mm) L Y L W W LEAD AND TERMINATION DIMENSIONS AND MATERIALS THICKNESS (T) OVERLAP (Y) T 0.22 +.020 -.010 .250 ±.01 (5.58 (6.35 ±0.25) +0.51 -0.25) .157 (3.98) max .045 (1.14) max. PALLADIUM SILVER TERMINATIONS T 0.22 +.020 -.010 .250 ±.01 (5.58 (6.35 ±0.25) +0.51 -0.25) .157 (3.98) max. .045 (1.14) max. Tin Plated over Non-Magnetic Barrier Termination LENGTH (L) WIDTH (W) MATERIALS NON-MAGNETIC RoHS Compliant ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. © 2002 American Technical Ceramics Corp. A M E R I C A N ATC North America [email protected] T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] w w w. a t c e r a m i c s . c o m 2