CIT J102K1CS112VDC.45 High sensitivity Datasheet

J102
RoHS Compliant
E197851
15.5 x 10.5 x 11.25 mm
Features
atures
•
•
•
•
•
High sensitivity
Super light weight
Low coil power consumption
PC board mounting
Ideal for high density mounting
Contact Data*
Contact Arrangement
1A = SPST N.O.
Contact Rating
1B = SPST N.C.
AgNi
1C = SPDT
3A & 5A @125VAC, general use, 20k cycles for N.O., 10k cycles for N.C.
3A & 5A @ 30VDC, resistive use, 50k cycles for N.O., 30k cycles for N.C.
Contact Resistance
< 50 milliohms initial
Contact Material
AgNi + Au, Ag + Au
1A & 3A @ 30VDC, resistive use
Maximum Switching Power
150W
Pilot Duty 270VA, 120VAC, N.O., 30k cycles
Ag
Maximum Switching Voltage 300VAC, 150VDC
1A & 3A @125VAC, general use
Pilot Duty 270VA, 120VAC, N.C., 6k cycles
Maximum Switching Current 5A
Coil Data*
Coil Voltage
VDC
Coil
Resistance
Ω +/- 10%
Pick Up Voltage
VDC (max)
Release Voltage
VDC (min)
75% of rated
voltage
10% of rated
voltage
Rated
Max
.20W
.36W
.45W
3
3.9
45
25
20
2.25
.3
5
6.5
125
75
56
3.75
.5
6
7.8
180
100
800
4.50
.6
9
11.7
405
225
180
6.75
.9
12
15.6
720
400
320
9.00
1.2
24
31.2
2880
1600
1280
18.00
2.4
Coil Power
W
Operate Time
ms
Release Time
ms
.20
.36
.45
5
5
General Data*
Electrical Life @ rated load
100K cycles, average
Mechanical Life
10M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength, Coil to Contact
1250V rms min. @ sea level initial
Contact to Contact
* Values can change due to the switching frequency, desired
reliability levels, environmental conditions and in-rush load levels.
It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance
suitability for their specific application. The use of any coil voltage
less than the rated coil voltage may compromise the operation of
the relay.
500V rms min. @ sea level initial
Shock Resistance
100m/s2 for 11 ms
Vibration Resistance
1.50mm double amplitude 10~40Hz
Terminal (Copper Alloy) Strength
5N
Operating Temperature
-40oC to +85oC
Storage Temperature
-40oC to +155oC
Solderability
260oC for 5 s
Weight
3.5g
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
J102
Ordering Information
1. Series
J102
1C
S
3
12VDC
.45
J102
J102K
2. Contact Arrangement
1A = SPST N.O.
1B = SPST N.C.
1C = SPDT
3. Sealing Options
S = Sealed
4. Contact Options
1 = 1amp Ag (requires .2, .36 or .45 watt coil)
3 = 3amp AgNi (requires .2, .36 or .45 watt coil)
3P = 3amp Ag (requires .2, .36 or .45 watt coil)
5 = 5amp AgNi (requires .45 watt coil)
5. Coil Voltage
3VDC
5VDC
6VDC
9VDC
12VDC
24VDC
6. Coil Power
.20 = .20W
.36 = .36W
.45 = .45W
Dimensions
Units = mm
15.54
[.61]
10.58
[.42]
11.60
[.46]
3.45 TYP
[.14]
page 2
www.citrelay.com
10.16
[.40]
2.54
[.10]
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
7.62
[.30]
fax - 763.535.2194
Specifications and availability subject to change without notice.
J102
Schematics & PC Layouts
Bottom Views
J102
10.16
[.40]
2.54
[.10]
7.62
[.30]
(6X) Ø1.00
[.04]
1A
1B
1C
J102K
10.16
[.40]
7.62
[.30]
1A
1B
www.citrelay.com
2.54
[.10]
(5X) Ø1.00
[.04]
1C
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
Similar pages