VER : B_5 update : 2015.11.17 AC-DC Switching Power Supply AQFC480F SERIES (CC Mode) 480 Watts KEY FEATURES Standard A Type Enclosed Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 Cooling by Built-in DC FAN Protections: Over Load / Over Voltage / Over Temperature / Short Circuit .All by Auto-recovery Built-in Remote ON/OFF Control Stand by 5V @ 0.6A High Efficiency up to 92% Ultra Compact Size: 7.98 x 4.2 x 1.78 Inches 3-Year Product Warranty ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. AQFC480F-12S 480W Max Output Wattage (W) Voltage Input Output Isolation AQFC480F-48S 90-264 VAC or 120-370 VDC 47-63 Hz Current (Full load) < 5.5 A max. (115 VAC) / < 3.0 A max. (230 VAC) Inrush Current (<2ms) < 50 A max. (115 VAC) / < 70 A max. (230 VAC) Leakage Current < 0.5 mA max.(240VAC 63Hz) Power Factor PF>0.95 (115 VAC) / PF>0.90 (230 VAC) at Full Load Voltage (V.DC.) 12V 24V 36V 48V Constant Current Range (V.DC) 10 ~ 13.2V 20 ~ 26.4V 26 ~ 36V 30 ~ 50.4V Current Adj. Range (A) max 5 ~ 40 4 ~ 20 3 ~ 13.33 3 ~ 10 Minimum Load 5% Maximum Capacitive Load 180000 uF 75000 uF 50000 uF 25000 uF Ripple & Noise (max.) 100mVp-p 200mVp-p 200mVp-p 300mVp-p Vin:115(V.AC) 85% 87% 89% 88% Vin:230(V.AC) 88% 90% 92% 91% Hold-up Time 10 ms min. Over Power Protection Auto recovery Over Voltage Protection Auto recovery Over Temperature Auto recovery Short Circuit Protection Auto-recovery Input-Output (V.AC) 3000VAC or 4242VDC Input-FG (V.AC) 1500V Output-FG .(V.AC) 5V Stand by Function AQFC480F-36S Frequency (Hz) Efficiency (%.) Protection AQFC480F-24S 500V 5VSB: [email protected] ; Tolerance 10% , Ripple & Noise: 100m Vp-p (max.) Remote Control +RC / -RC: Power ON=open ; Power OFF=short FAN Control 12VDC / 0.5A max. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -1- VER : B_5 update : 2015.11.17 AC-DC Switching Power Supply AQFC480F SERIES (CC Mode) 480 Watts ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Model No. Operating Temperature Environment Physical Safety EMC AQFC480F-12S AQFC480F-24S -20°C…+70°C (with derating) AQFC480F-36S Storage Temperature -25°C…+85°C Temperature Coefficient ±0.03%/°C ( 0~50°C ) Humidity 95% RH MTBF >100,000 h @ 25°C (MIL-HDBK-217F) Vibration 10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes. (202.8 x 106.5 x 45.0 mm ) Tolerance 0.5 mm Dimension (L x W x H) 7.98 x 4.2 x 1.78 Inches Weight 1050 g Agency Approvals UL60950-1, CE(Surge:4KV) EMI (Conducted & Radiated Emission) EN 55022 class B EMS (Noise Immunity) EN 55024 AQFC480F-48S NOTE 1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. 2. Strongly recommend to conduct this test with DC Voltage. If customer wishes to test with AC Voltage, please disconnect all Y-Capacitors within Arch power supply. BLOCK DIAGRAM DERATING http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : B_5 update : 2015.11.17 AC-DC Switching Power Supply AQFC480F SERIES (CC Mode) 480 Watts MECHANICAL DIMENSION Standard AC Input Terminal Pin ASSEMBLY INSTRUCTIONS *U Case T=2.0mm Customer is advised to screw into the threads no more than 2.0mm PIN# Single 1 AC IN (N) 2 AC IN (L) 3 DC Output Terminal Pin PIN# Single 4~6 +DC OUT 7~9 -DC OUT Connector Pin (CN4) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# Single C1 NC C2 NC C3 +RC C4 -RC C5 NC C6 NC C7 +5V SB C8 -5V SB -3- VER : B_5 update : 2015.11.17 AC-DC Switching Power Supply AQFC480F SERIES (CC Mode) 480 Watts MECHANICAL DIMENSION A Type AC Input Terminal Pin ASSEMBLY INSTRUCTIONS *U Case T=2.5mm Customer is advised to screw into the threads no more than 2.0mm PIN# Single 1 AC IN (N) 2 AC IN (L) 3 DC Output Terminal Pin PIN# Single 4~9 +DC OUT 10~15 -DC OUT Connector Pin (CN4) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 PIN# Single C1 NC C2 NC C3 +RC C4 -RC C5 NC C6 NC C7 +5V SB C8 -5V SB -4- VER : B_5 update : 2015.11.17 AC-DC Switching Power Supply AQFC480F SERIES (CC Mode) 480 Watts FUNCTION DESCRIPITON of CN4 : Pin No. Function C1 NC Description C2 NC C3 +RC Turns the output on and off by electrical or dry contact between pin C4 (-RC), Short: Power OFF, Open: Power ON. C4 -RC Remote control ground. C5 NC C6 NC C7 +5V SB Stand by voltage output ground 4.5~5.5V, referenced to pin C8(-5V SB). The maximum load current is 0.6A. C8 -5V SB Stand by voltage output ground. FUNCTION MANUAL : Remote Control It can be turned ON/OFF by using the "Remote Control" function. Between RC+(pinC3) and RC-(pinC4) Output Status SW ON (Short) SW OFF (Open) OFF ON http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -5-