Teledyne CCR-40K30-N Failsafe spdt coaxial switch Datasheet

Series CCR-40K/CR-40K
COAX SWITCHES
Miniature DC–40 GHz
Failsafe SPDT Coaxial Switch
PART NUMBER
DESCRIPTION
CCR-40K
Commercial Failsafe SPDT, DC-40GHz, 2.92mm.
CR-40K
Elite Failsafe SPDT, DC-40GHz, 2.92mm.
The CCR-40K/CR-40K is a broadband, SPDT, electromechanical, coaxial switch designed to switch
a microwave signal from a common input to either of two outputs. The characteristic impedance is 50
Ohms. These switches incorporate 2.92mm high performance connectors.
The CCR-40K/CR-40K series switch is offered with a failsafe actuator. The CCR-40K/CR-40K series is
compatible with the two most common mounting hole patterns making it interchangeable with a variety of
switches.
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Operating Temperature
Commercial Model, CCR-40K
Elite Model, CR-40K
Form Factor
–40°C to 65°C
–55°C to 85°C
Vibration (MIL-STD-202 Method 214,
Condition D, non-operating)
10 g’s RMS
Shock (MIL-STD-202 Method 213,
Condition D, non-operating)
500 g’s
Standard Actuator Life
Actuator Life w/ Additional Features
5,000,000 cycles
1,000,000 cycles
Connector Type
2.92mm
Humidity (Moisture Seal)
Available
Weight
1.65 oz. (46.78g) (max.)
SPDT,
break before make
Frequency Range
DC–40 GHz
Characteristic Impedance
50 Ohms
Operate Time
10 ms (max.)
Release Time
10 ms (max.)
Actuation Voltage Available
12
Actuation Current, max. @ ambient temp.
200 250 120
15
24
28 V
90 mA
PERFORMANCE CHARACTERISTICS
Frequency
DC–6 GHz
6–12 GHz
12–18 GHz
18–27 GHz
27-34 GHz
34-40 GHz
0.2
0.4
0.5
0.6
0.7
0.8
Insertion Loss, dB,
max.
Isolation, dB, min.
VSWR , max.
70
60
60
50
50
50
1.25:1
1.40:1
1.50:1
1.60:1
1.80:1
1.80:1
PART NUMBERING SYSTEM
CCR-40
K
1
C
-
T **
Options
Series
Connectors
Actuator Type
Actuator Voltage
Connector
K: 2.92mm Female
Actuator Voltage
1: 28 Vdc Failsafe
2: 15 Vdc Failsafe
3: 12 Vdc Failsafe
4: 24 Vdc Failsafe
Actuator Type
0: Standard Contacts
C: Indicator Contacts
**SEE PARTS LIST ON PAGE 7
Options
T: TTL Drivers with Diodes
D: Transient Suppression
Diodes
N: Narrow Body
M: Moisture Seal
S: 9-Pin D-Sub Connector
For other options, contact factory.
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCR-40K/CR-40K Page 1
CCR-40K\CR-40K\072013\Q3
Series CCR-40K/CR-40K
COAX SWITCHES
Miniature DC–40 GHz
Failsafe SPDT Coaxial Switch
SCHEMATICS AND MECHANICAL OUTLINE
Analog
TTL
Indicators
2X SOLDER TERMINALS
SOLDER WIRE MAXIMUM
TEMP 250ºC FOR NO
MORE THAN 5 SEC
TELEDYNE COAX
SWITCHES
P/N:
VOLTAGE:
VDC
D/C:
M/O:
RoHS
MADE IN
NO
2
IN
NC
1
2.92mm FEMALE CONNECTOR
H = 1.30 MAX. STD MODEL
H = 1.80 MAX. TTL MODEL
Optional Narrow Width Body
Standard Width Body
9 PIN D-SUB PINOUT FOR FAILSAFE SPDT
TRUTH TABLE (with TTL option)
OPTIONS
Pin
No.
1
2
3
4
5
6
7
8
9
Basic
Indicators
+
-
+
-
CCR-40K/CR-40K Page 2
A
B
C
TTL
Indicators &
TTL
Common
1
Common
1
Vsw
Vsw
A
B
C
Logic
Input
1
RF Path
Indicator
(if applicable)
IN
to 1
IN
to 2
A
0
On
Off
C
0
1
Off
On
0
C
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
B
© 2013 TELEDYNE COAX SWITCHES
CCR-40K\CR-40K\072013\Q3
Series CCR-40K/CR-40K
COAX SWITCHES
Miniature DC–40 GHz
Failsafe SPDT Coaxial Switch
TYPICAL NARROWBAND RF INSERTION LOSS PERFORMANCE CURVES
Insertion Loss ( DC-40 GHz )
0.00
-0.10
Insertion Loss ( dB )
-0.20
-0.30
-0.40
-0.50
-0.60
-0.70
-0.80
-0.90
-1.00
0
5
10
15
20
25
30
35
40
30
35
40
30
35
40
Frequency ( GHz )
VSWR ( DC-40 GHz )
2
1.9
1.8
VSWR
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
0
5
10
15
20
25
Frequency ( GHz )
Isolation ( DC-40 GHz )
0
-20
Isolation ( dB )
-40
-60
-80
-100
-120
-140
0
5
10
15
20
25
Frequency ( GHz )
RF NOTES
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCR-40K/CR-40K Page 3
CCR-40K\CR-40K\072013\Q3
Series CCR-40K/CR-40K
COAX SWITCHES
Miniature DC–40 GHz
Failsafe SPDT Coaxial Switch
GLOSSARY
Actuator
An actuator is the electromechanical mechanism that
transfers the RF contacts from one position to another upon
DC command.
TTL Switch Driver Option
As a special option, switch drivers can be provided for both
failsafe and latching switches, which are compatible with
industry-standard low-power Schottky TTL circuits.
Arc Suppression Diode
A diode is connected in parallel with the coil. This diode
limits the “reverse EMF spike” generated when the coil deenergizes to 0.7 volts. The diode cathode is connected to
the positive side of the coil and the anode is connected to
the negative side.
Performance Parameters vs Frequency
Generally speaking, the RF performance of coaxial switches
is frequency dependent. With increasing frequency, VSWR
and insertion loss increase while isolation decreases. All
data sheets specify these three parameters as “worst case”
at the highest operating frequency. If the switch is to be
used over a narrow frequency band, better performance
can be achieved.
Date Code
All switches are marked with either a unique serial number
or a date code. Date codes are in accordance with MILSTD-1285 Paragraph 5.2.5 and consist of four digits.
The first two digits define the year and the last two digits
define the week of the year (YYWW). Thus, 1032 identifies
switches that passed through final inspection during the
32nd week of 2010.
Actuator Current vs Temperature
The resistance of the actuator coil varies as a function of
temperature. There is an inverse relationship between the
operating temperature of the switch and the actuator drive
current. For switches operating at 28 VDC, the approximate
actuator drive current at temperature, T, can be calculated
using the equation:
Failsafe
A failsafe switch reverts to the default or failsafe position
when actuating voltage is removed. This is realized by a
return spring within the drive mechanism. This type of switch
requires the continuous application of operating voltage to
select and hold any position. (Multi-position switches are
normally open with no voltage applied).
Indicator
Indicators tell the system which position the switch is in.
Other names for indicators are telemetry contacts or tellback
circuit. Indicators are usually a set of internally mounted DC
contacts linked to the actuator. They can be wired to digital
input lines, status lights, or interlocks. Unless otherwise
specified, the maximum indicator contact rating is 30 Vdc,
50 mA, or 1.5 Watts into a resistive load.
IT =
IA
[1 + .00385 (T-20)]
Where:
IT = Actuator current at temperature, T
IA = Room temperature actuator current –
see data sheet
T = Temperature of interest in °C
Magnetic Sensitivity
An electro-mechanical switch can be sensitive to ferrous
materials and external magnetic fields. Neighboring ferrous
materials should be permitted no closer than 0.5 inches and
adjacent external magnetic fields should be limited to a flux
density of less than 5 Gauss.
Isolation
Isolation is the measure of the power level at the output
connector of an unconnected RF channel as referenced to
the power at the input connector. It is specified in dB below
the input power level.
SPDT Switch
A single-pole double-throw, bi-directional switch that can
be used as having one input and two outputs or two inputs
and one output.
Switching Time
Switching time is the total interval beginning with the arrival
of the leading edge of the command pulse at the switch DC
input and ending with the completion of the switch transfer,
including contact bounce. It consists of three parts: (1)
inductive delay in the coil, (2) transfer time of the physical
movement of the contacts, and (3) the bounce time of the
RF contacts.
SPECIAL FEATURE
Switching High-Power or Highly Sensitive Signals
Ensure the most linear response with the best galvanically
matched contact system in the industry. Extremely low
passive intermodulation is standard on all of our switches.
Carrier
Frequency 1
Carrier
Frequency 2
PIM 3rd Order
Frequency
PIM 5th
Order Frequency
870 MHz
893 MHz
847 MHz
824 MHz
SPDT
CCR-40K/CR-40K Page 4
3rd Order
Intermodulation
5th Order
Intermodulation
–91 dBm
–110 dBm
–134 dBc
–153 dBc
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2013 TELEDYNE COAX SWITCHES
CCR-40K\CR-40K\072013\Q3
Series CCR-40K/CR-40K
COAX SWITCHES
Miniature DC–40 GHz
Failsafe SPDT Coaxial Switch
FAILSAFE CCR-40K/CR-40K PART NUMBER LIST
PART NO.
1
*
CCR-40KXC
PART NO.
43
PART NO.
CCR-40KX0-TMS
85
CR-40KX0-NM
2
CCR-40KXC-D
44
CCR-40KX0-TN
86
CR-40KX0-NMS
3
CCR-40KXC-DM
45
CCR-40KX0-TNM
87
CR-40KX0-NS
4
CCR-40KXC-DMS
46
CCR-40KX0-TNMS
88
CR-40KX0-S
5
CCR-40KXC-DN
47
CCR-40KX0-TNS
89
CR-40KX0-T
6
CCR-40KXC-DNM
48
CCR-40KX0-TS
90
CR-40KX0-TM
7
CCR-40KXC-DNMS
49
CR-40KXC
91
CR-40KX0-TMS
8
CCR-40KXC-DNS
50
CR-40KXC-D
92
CR-40KX0-TN
9
CCR-40KXC-DS
51
CR-40KXC-DM
93
CR-40KX0-TNM
10
CCR-40KXC-M
52
CR-40KXC-DMS
94
CR-40KX0-TNMS
11
CCR-40KXC-MS
53
CR-40KXC-DN
95
CR-40KX0-TNS
12
CCR-40KXC-N
54
CR-40KXC-DNM
96
CR-40KX0-TS
13
CCR-40KXC-NM
55
CR-40KXC-DNMS
14
CCR-40KXC-NMS
56
CR-40KXC-DNS
15
CCR-40KXC-NS
57
CR-40KXC-DS
16
CCR-40KXC-S
58
CR-40KXC-M
17
CCR-40KXC-T
59
CR-40KXC-MS
18
CCR-40KXC-TM
60
CR-40KXC-N
19
CCR-40KXC-TMS
61
CR-40KXC-NM
20
CCR-40KXC-TN
62
CR-40KXC-NMS
21
CCR-40KXC-TNM
63
CR-40KXC-NS
22
CCR-40KXC-TNMS
64
CR-40KXC-S
23
CCR-40KXC-TNS
65
CR-40KXC-T
24
CCR-40KXC-TS
66
CR-40KXC-TM
25
CCR-40KX0
67
CR-40KXC-TMS
26
CCR-40KX0-D
68
CR-40KXC-TN
27
CCR-40KX0-DM
69
CR-40KXC-TNM
28
CCR-40KX0-DMS
70
CR-40KXC-TNMS
29
CCR-40KX0-DN
71
CR-40KXC-TNS
30
CCR-40KX0-DNM
72
CR-40KXC-TS
31
CCR-40KX0-DNMS
73
CR-40KX0
32
CCR-40KX0-DNS
74
CR-40KX0-D
33
CCR-40KX0-DS
75
CR-40KX0-DM
34
CCR-40KX0-M
76
CR-40KX0-DMS
35
CCR-40KX0-MS
77
CR-40KX0-DN
36
CCR-40KX0-N
78
CR-40KX0-DNM
37
CCR-40KX0-NM
79
CR-40KX0-DNMS
38
CCR-40KX0-NMS
80
CR-40KX0-DNS
39
CCR-40KX0-NS
81
CR-40KX0-DS
40
CCR-40KX0-S
82
CR-40KX0-M
41
CCR-40KX0-T
83
CR-40KX0-MS
42
CCR-40KX0-TM
84
CR-40KX0-N
X = 1 (28Vdc), 2 (15Vdc), 3 (12Vdc) and 4 (24Vdc)
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCR-40K/CR-40K Page 5
CCR-40K\CR-40K\072013\Q3
Similar pages