PRODUCT DATASHEET Jenny series last update 18/10/2016 DETAILS Product Number FCN14875_JENNY-T4 Family Jenny Type Pack Color clear Diameter 35 + 50 mm Height 17,02 mm Style rectang Optic Material Silicone Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 18/10/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector V10 Gen6 asymmetric degStreetligh... 93 % 0.460 - V10 Gen7 sim: AsymmetricStreetligh... sim: 93 % sim: 0.440 - CLL02x/CLU02x (LES10) asymmetric degStreetligh... 93 % 0.460 - CXA/B 15xx Asymmetric degStreetligh... 94 % 0.480 - XM-L EZW asymmetric degStreetligh... 93 % 0.680 - MK-R asymmetric degStreetligh... 93 % 0.560 - MX-6 asymmetric degStreetligh... 92 % 0.610 - XHP70 asymmetric degStreetligh... 91 % 0.500 - LUXEON M/MX asymmetric degStreetligh... 94 % 0.660 - CXM-9 asymmetric degStreetligh... 93 % 0.460 - Soleriq P9 asymmetric degStreetligh... 94 % 0.470 - Duris P10 sim: AsymmetricStreetligh... sim: 92 % sim: 0.560 - COB D Series LES 9.8 mm asym deg Streetligh... 94 % 0.470 - MJT COB LES 9.8 Asymmetric degStreetligh... 94 % 0.470 - MJT COB LES 6 Asymmetric degStreetligh... 92 % 0.540 - SLE G5 LES6 Asymmetric degStreetligh... 93 % 0.600 - SLE G5 LES11 Asymmetric degStreetligh... 92 % 0.450 - May 29th 2017 5:03 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 41.5 4 C/C 25.4 4 C/C 3 With pin Front view 18.01 17.01 3 Bottom view 35 50 2 2 Top view INDEX PART NO 1 2 F14563 C14436 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. MATERIAL JENNY-T4 JENNY-HLD-A-BLK Silicone PC COLOUR Clear Black Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE FCN14875_JENNY-T4 SIZE 1 PART NUMBER A4 SCALE D DESCRIPTION FCN14875 1:1 WEIGHT 9,8 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.