Meder MK12M1C66C-500W Reed sensors with mounting holes for screw fastening Datasheet

MK21 Series
MEDER electronic
Reed Sensors with Mounting
Holes for Screw Fastening
DESCRIPTION
MK21 sensors are magnetically operated Reed
proximity switches designed for screw mounting.
The sensor should be mounted on a fixed surface
with the actuating magnet on the moving surface.
Introduction or removal of the magnetic field
determines the closing and opening of the Reed
Switch. Leads are Teflon coated. Designed for
extreme environment. Resistant to water, fuels,
oils, inks and most acids.
APPLICATIONS
FEATURES
• Position and limit switch
Pneumatic or hydraulic actuator position
• End motion detection for linear drive
Indication and end travel limit switch
• Machine industry
End motion detection and door/flap control
• High power switches available
• Designed for high temperature up to 160o C
(molded version)
• Four operate sensitivities available
• A choice of cable terminations and lengths are
available
• Molded and potted versions available
DIMENSIONS
All dimensions in mm [inch]
www.meder.com
270
MEDER electronic
MK21 Series
Reed Sensors with Mounting
Holes for Screw Fastening
ORDER INFORMATION
Part Number Example
MK21M - 1A66 C - 500
MK21P - 1A66 C - 500
W
W
Series
Contactform
Switch
Model
Magnetic
Sensitivity
Cable
Length
(mm)
Termination
MK21x-
xx
xx
x-
xxx
W
M = molded
P = potted
1 Form A
66 is the switch model
C is the magnetic sensitivity
500 is the cable length (mm)
Options
66
B, C, D, E
52, 85
C, D, E
90
C, D, E
1 Form B“*
1 Form C**
500*
* Other cable lengths available
** Potted version
MAGNETIC SENSITIVITY
Sensitivity
Class
Pull In
AT Range
B
10 - 15
C
15 - 20
D
20 - 25
E
25 - 30
TERMINATION
For wire and termination details, as well as other magnetic sensitivity classes please contact factory.
W
The cable cut length includes:
5 mm of wire stripped and tinned.
www.meder.com
271
MEDER electronic
MK21 Series
Reed Sensors with Mounting
Holes for Screw Fastening
CONTACT DATA
Switch Model →
Contact Form →
All Data at 20° C
Contact Ratings
Conditions
Switching Power
Any DC combination of V & A not to
exceed their individual max.‘s
Switching Voltage
Switch 52
Form A
Min. Typ.
Max.
Switch 66
Form A
Min. Typ. Max. Unit
50
70 (VA)
10
W
DC or peak AC
250
200
V
Switching Current
DC or peak AC
0.5
0.5
A
Carry Current
DC or peak AC
2.5
1.25
A
Static Contact Resistance
w/ 0.5 V & 10 mA
200
150
mΩ
200
mΩ
Measured w/ 0.5 V & 50 mA ,
Dynamic Contact Resistance
1.5 ms after closure
Insulation Resistance across
100 volts applied
Contact
1010
1010*
Ω
Breakdown Voltage across
Contact
Voltage applied for 60 sec. min.
600
225*
VDC
Operate Time incl. Bounce
Measured w/ 100 % overdrive
1.0
0.5
ms
Release Time
Measured w/ no coil suppression
0.1
0.1
ms
Capacitance
at 10 kHz cross contact
0.2
0.2
pF
Contact Operation **
Must Operate Condition
Steady state field
10
30
10
60
AT
Must Release Condition
Steady state field
4
27
4
54
AT
g
Environmental Data
Shock Resistance
1/2 sinus wave duration 11 ms
50
50
Vibration Resistance
From 10 - 2000 Hz
20
20
g
Ambient Temperature
M 10°C/ minute max. allowable
-20
85
-30
150
o
Ambient Temperature
P 10°C/ minute max. allowable
-35
85
-20
85
o
C
-40
160
o
C
260
o
Stock Temperature
10°C/ minute max. allowable
260
Soldering Temperature
5 sec.
260
C
C
Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive
switch.
* Insulation resistance of 1012 and breakdown voltage of 480 VDC is available.
** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if
more detail is required.
www.meder.com
272
MEDER electronic
MK21 Series
Reed Sensors with Mounting
Holes for Screw Fastening
CONTACT DATA
All Data at 20° C
Switch Model →
Contact Form →
Contact Ratings
Conditions
Switch 85
Form A
Switch 90
Form B/C, potted
Min. Typ. Max. Min. Typ. Max. Unit
Switching Power
Any DC combination of V & A
not to exceed their individual
max.‘s
100
20
W
Switching Voltage
DC or peak AC
400
175
V
Switching Current
DC or peak AC
1.0
0.5
A
Carry Current
DC or peak AC
2.5
1.0
A
Static Contact Resistance
w/ 0.5 V & 10 mA
150
150
mΩ
Dynamic Contact Resistance
Measured w/ 0.5 V & 50 mA ,
1.5 ms after closure
200
250
mΩ
Insulation Resistance across
100 volts applied
Contact
1010
109
Ω
Breakdown Voltage across
Contact
Voltage applied for 60 sec.
min.
4000
200
VDC
Operate Time incl. Bounce
Measured w/ 100 % overdrive
1.0
0.7
ms
Release Time
Measured w/ no coil
suppression
0.1
1.5
ms
Capacitance
at 10 kHz cross contact
0.2
1.0
pF
Contact Operation **
Must Operate Condition
Steady state field
20
60
Must Release Condition
Steady state field
12
54
15
40
AT
AT
Environmental Data
Shock Resistance
1/2 sinus wave duration 11 ms
50
50
g
Vibration Resistance
From 10 - 2000 Hz
20
20
g
Ambient Temperature
M 10°C/ minute max. allowable
-20
85
-20
85
o
C
Ambient Temperature
P 10°C/ minute max. allowable
-35
85
-35
85
o
C
C
C
Stock Temperature
10°C/ minute max. allowable
260
260
o
Soldering Temperature
5 sec.
260
260
o
Please note: The indicated electrical data are maximum values and can vary downwards when using a more
sensitive switch.
* Insulation resistance of 1012 and breakdown voltage of 480 VDC is available.
** These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult
factory if more detail is required.
www.meder.com
273
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Standex Electronics:
MK21M-1A66B-500W MK21-1A66B-500W MK21-1A66C-500W
Similar pages