Everlight EAST1224BA0 Compatible with automatic placement equipment. Datasheet

SMD  B
EAST1224BA0
Features
․Package in 12 mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
․Compliance with EU REACH.
․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm)
Description
․The SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density,
reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
1
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Device Selection Guide
Chip
Materials
InGaN
Emitted Color
Resin Color
Blue
Water Clear
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
20
mA
IFP
100
mA
Power Dissipation
Pd
95
mW
Electrostatic Discharge
ESDHBM
150
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
eak Forward Current
(Duty 1/10 @1KHz)
2
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous
Intensity
Viewing Angle
Peak
Symbol
Min.
Typ.
Max.
Unit
Iv
450
-----
1800
mcd
2θ1/2
-----
30
-----
deg
λp
-----
468
-----
nm
Condition
Wavelength
IF=20mA
Dominant
Wavelength
λd
464.5
-----
476.5
nm
△λ
-----
25
-----
nm
VF
2.7
3.3
3.7
V
IR
-----
-----
50
μA
Spectrum
Radiation
Bandwidth
Forward
Voltage
Reverse
Current
VR=5V
Note:
1.Tolerance of Luminous Intensity: ±11%
2.Tolerance of Dominant Wavelength ±1nm
3
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Bin Range of Luminous Intensity
Bin Code
Min.
Max.
U
450
715
V
715
1120
W
1120
1800
Unit
Condition
mcd
IF =20mA
Unit
Condition
nm
IF =20mA
Bin Range Of Dom. Wavelength
Bin Code
Min.
Max.
A9
464.5
467.5
A10
467.5
470.5
A11
470.5
473.5
A12
473.5
476.5
Note:
1.Tolerance of Luminous Intensity: ±11%
2.Tolerance of Dominant Wavelength ±1nm
4
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Typical Electro-Optical Characteristics Curves
5
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Package Dimension
-
+
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
6
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Label Explanation
Pb
EVERLIGHT
CPN :
P N : XXXXXXXXXXXXX
RoHS
XXXXXXXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
QTY : XXX
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank
‧REF: Forward Voltage Rank
‧LOT No: Lot Number
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
7
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
8
Aluminum moisture-proof bag
Desiccant
Label
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
260°C Max.
10sec. Max.
Above255°C
30sec.Max.
3°C/sec.Max.
6°C/sec.Max.
Pre-heating
Above 217°C
60~150sec.
150~200°C
60~120sec.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less
than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful
because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs
will or will not be damaged by repairing.
9
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
DATASHEET
SMD  B
EAST1224BA0
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight americas before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
10
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 26-Apr-2013.Issue No: 1
www.everlightamericas.com
Similar pages