ILLUMINATION LUXEON MZ Best combination of brightness, uniformity and luminance enabling precision light control LUXEON MZ is an undomed multi-die LED designed to enable outdoor and industrial applications with all of the features of LUXEON M including the identical solder footprint, but allowing for tighter beam control and higher punch due to a smaller apparent source size. With Freedom from Binning and leading performance, LUXEON MZ falls within a single 3- or 5-step MacAdam ellipse centered in ANSI to ensure color consistency from LED to LED, delivering high efficacy and high flux density from a uniform source with tight correlated color temperature control. The superior quality of light, volume of lumens, and real world efficacy enable leading performance and efficient solution development in a wide variety of lighting segments. FEATURES AND BENEFITS PRIMARY APPLICATIONS Undomed package for improved punch and exceptional luminance High Bay & Low Bay Common footprint as LUXEON M for compatibility with existing designs Lamps Industry leading 11.2V package delivers exceptional efficacy Outdoor Leading thermal resistance enables flexible system design to optimize for lm/$ and lm/W Specialty Lighting Exceeds ENERGY STAR® lumen maintenance requirements Spotlights RoHS DS136 LUXEON MZ Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved. No. E352519 COMPLIANT Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Dominant Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON MZ LEDs are tested and binned with a drive current of 700mA for LUXEON MZ 12V, 1400mA for LUXEON MZ 6V and 2800mA for LUXEON M 3V at a junction temperature, Tj, of 85ºC. Part Number Nomenclature Part numbers for LUXEON MZ follow the convention below: L M Z A – B C D D – E E E E Where: A – designates minimum CRI (7=70, 8=80, 9=90CRI, 0=Royal Blue) B – designates voltage (S=12V, R=6V, Q=3V) C – designates color (W=White, R=Royal Blue) D D – designates CCT (27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K , 00=Royal Blue) E E E E – designates minimum flux lumen (optional) Therefore, the following part number is used for a white LUXEON MZ 12V 3000K 80CRI: L M Z 8 – S W 3 0 – x x x x Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON MZ is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1a. Product performance of LUXEON MZ White at test current, Tj=85ºC. VOLTAGE 12V 6V 3V NOMINAL CCT [2] MINIMUM CRI 3000K 4000K 5000K 5700K 6500K 2700K 3000K 3500K 4000K 5000K 2700K 3000K 5700K 3000K 4000K 5000K 5700K 6500K 2700K 3000K 3500K 4000K 5000K 2700K 3000K 5700K 3000K 4000K 5000K 5700K 6500K 2700K 3000K 3500K 4000K 5000K 2700K 3000K 5700K 70 70 70 70 70 80 80 80 80 80 90 90 90 70 70 70 70 70 80 80 80 80 80 90 90 90 70 70 70 70 70 80 80 80 80 80 90 90 90 LUMINOUS FLUX [1] (lm) MINIMUM TYPICAL 805 870 870 900 900 710 730 730 840 840 560 600 700 805 870 870 900 900 710 730 730 840 840 560 600 700 805 870 870 900 900 710 730 730 840 840 560 600 700 840 940 950 980 980 760 781 800 880 890 600 640 770 840 940 950 980 980 760 781 800 880 890 600 640 770 840 940 950 980 980 760 781 800 880 890 600 640 770 TEST CURRENT (mA) PART NUMBER 700 700 700 700 700 700 700 700 700 700 700 700 700 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 LMZ7-SW30 LMZ7-SW40 LMZ7-SW50 LMZ7-SW57 LMZ7-SW65 LMZ8-SW27 LMZ8-SW30 LMZ8-SW35 LMZ8-SW40 LMZ8-SW50 LMZ9-SW27 LMZ9-SW30 LMZ9-SW57 LMZ7-RW30 LMZ7-RW40 LMZ7-RW50 LMZ7-RW57 LMZ7-RW65 LMZ8-RW27 LMZ8-RW30 LMZ8-RW35 LMZ8-RW40 LMZ8-RW50 LMZ9-RW27 LMZ9-RW30 LMZ9-RW57 LMZ7-QW30 LMZ7-QW40 LMZ7-QW50 LMZ7-QW57 LMZ7-QW65 LMZ8-QW27 LMZ8-QW30 LMZ8-QW35 LMZ8-QW40 LMZ8-QW50 LMZ9-QW27 LMZ9-QW30 LMZ9-QW57 Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. Table 1b. Product performance for LUXEON MZ Royal Blue at test current, Tj=85°C. VOLTAGE 12V 6V 3V DOMINANT WAVELENGTH (nm) RADIOMETRIC POWER (mW) MINIMUM MAXIMUM MINIMUM TYPICAL 445 445 445 460 460 460 3500 3500 3500 3600 3600 3600 TEST CURRENT (mA) PART NUMBER 700 1400 2800 LMZ0-SR00 LMZ0-RR00 LMZ0-QR00 Notes for Table 1b: 1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 3 Optical Characteristics Table 2. Optical characteristics for LUXEON MZ at test current, Tj=85°C. PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] LMZx-xWxx 140° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON MZ at test current, Tj=85ºC. PART NUMBER FORWARD VOLTAGE (V) [1] MINIMUM TYPICAL MAXIMUM TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE (mV/°C) [2] TYPICAL THERMAL RESISTANCE – JUNCTION TO SOLDER PAD (°C/W) LMZx-Sxxx 10.50 11.20 11.70 -7.00 1.25 LMZx-Rxxx 5.25 5.60 6.00 -3.50 1.25 LMZx-Qxxx 2.63 2.80 3.00 -1.75 1.25 Notes for Table 3: 1. Lumileds maintains a tolerance of ± 0.06V on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON MZ. PARAMETER MAXIMUM PERFORMANCE DC Forward Current [1,2] 1200mA for LMZx-Sxxx 2400mA for LMZx-Rxxx 4800mA for LMZx-Qxxx Peak Pulsed Forward Current [1,3] 1375mA for LMZx-Sxxx 2750mA for LMZx-Rxxx 5500mA for LMZx-Qxxx LED Junction Temperature [1] (DC & Pulse) -40°C to 135°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature -40°C to 120°C [1] Storage Temperature -40°C to 120°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current 3. At 10% duty cycle with pulse width of 10ms. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 4 Characteristic Curves Spectral Power Distribution Characteristics Figure 1a: Typical normalized power vs. wavelength for LMZ7-xWxx at specified test current, Tj=85ºC. Figure 1b: Typical normalized power vs. wavelength for LMZ8-xWxx at specified test current, Tj=85ºC. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 5 Figure 1c: Typical normalized power vs. wavelength for LMZ9-xWxx at specified test current, Tj=85ºC. Figure 1d: Typical normalized power vs. wavelength for LMR0-xR00 at specified test current, Tj=85ºC. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 6 Light Output Characteristics Figure 2: Typical normalized light output vs. junction temperature for LMZx-xxxx at specified test current. Figure 3a: Typical normalized light output vs. forward current for LMZx-Sxxx at Tj=85ºC. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 7 Figure 3b: Typical normalized light output vs. forward current for LMZx-Rxxx at Tj=85ºC. Figure 3c: Typical normalized light output vs. forward current for LMZx-Qxxx at Tj=85ºC. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 8 Forward Current Characteristics Figure 4a: Typical forward current vs. forward voltage for LMZx-Sxxx at Tj=85ºC. Figure 4b: Typical forward current vs. forward voltage for LMZx-Rxxx at Tj=85ºC. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 9 Figure 4c: Typical forward current vs. forward voltage for LMZx-Qxxx at Tj=85ºC. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 10 Radiation Patterns Figure 5: Typical radiation pattern for LMZx-xxxx at specified test current, Tj=85ºC. Figure 6: Typical polar radiation pattern for LMZx-xxxx at specified test current, Tj=85ºC. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 11 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. Reels of LUXEON MZ LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D A – designates luminous flux bin (example: M=630 to 680 lumens, T=970 to 1040 lumens) B – designates color bin (example: 1=6500K, 2=5700K, 3=5000K, 5=4000K, 6=3500K, 7=3000K, 8=2700K, 00= Royal Blue) C – designates color space (example: 5=5-step MacAdam Ellipse, 3=3-step MacAdam Ellipse) D – designates forward voltage bin (example: F, G, H) Therefore, LUXEON MZ with a lumen range of 630 to 680, color bin of 3000K, 5-step MacAdam ellipse and a forward voltage range of 2.63 to 2.75V for 3 volt parts has the following CAT code: M 7 5 F Reels of LUXEON MZ Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the format below: A B C A – designates radiometric power bin (example: B=4200 to 4400mW, D=4600 to 4800mW) B – designates dominant wavelength bin (example: 5=450 to 455nm, 6=455 to 460nm) C – designates forward voltage bin (example: F, G, H) Therefore, a Royal Blue LUXEON MZ with a radiometric power range of 4200 to 4400mW, dominant wavelength 450 to 455nm a forward voltage range of 11.50 to 11.70V for 12 volt parts has the following CAT code: B 5 H DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 12 Luminous Flux Bins Table 5 lists the standard photometric luminous flux bins for LUXEON MZ emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON MZ White. BIN LUMINOUS FLUX (lm) MINIMUM MAXIMUM K 550 590 L 590 630 M 630 680 N 680 730 P 730 780 Q 780 840 R 840 900 S 900 970 T 970 1040 U 1040 1120 V 1120 1200 W 1200 1290 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. Radiometric Power Bins Table 6. Radiometric power bin definitions for LUXEON MZ Royal Blue. BIN RADIOMETRIC POWER (mW) MINIMUM MAXIMUM 3 3500 3600 4 3600 3800 5 3800 4000 A 4000 4200 B 4200 4400 Notes for Table 6: 1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 13 Color Bin Definition Figure 7: 3- and 5-step MacAdam ellipse illustration for Table 7. Table 7. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON MZ. NOMINAL CCT COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 2700K Single 3-step MacAdam ellipse 0.4578, 0.4101 0.00810 0.00420 53.70 3000K Single 3-step MacAdam ellipse 0.4338, 0.4030 0.00834 0.00408 53.22 3500K Single 3-step MacAdam ellipse 0.4073, 0.3917 0.00927 0.00414 54.00 4000K Single 3-step MacAdam ellipse 0.3818, 0.3797 0.00939 0.00402 53.72 5000K Single 3-step MacAdam ellipse 0.3447, 0.3553 0.00822 0.00354 59.62 3000K Single 5-step MacAdam ellipse 0.4338, 0.4030 0.01390 0.00680 53.22 4000K Single 5-step MacAdam ellipse 0.3818, 0.3797 0.01565 0.00670 53.72 5000K Single 5-step MacAdam ellipse 0.3447, 0.3553 0.01370 0.00590 59.62 5700K Single 5-step MacAdam ellipse 0.3287, 0.3417 0.01243 0.00533 59.09 6500K Single 5-step MacAdam ellipse 0.3123, 0.3282 0.01115 0.00475 58.57 Notes for Table 7: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. Dominant Wavelength Bins Table 8. Dominant wavelength bin definition for LUXEON MZ Royal Blue. BIN DOMINANT WAVELENGTH (nm) MINIMUM MAXIMUM 4 445 450 5 450 455 6 455 460 Notes for Table 8: 1. Lumileds maintains a tolerance of ±0.5nm on dominant wavelength measurements. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 14 Forward Voltage Bins Table 9. Forward voltage bin definitions for LUXEON MZ. PART NUMBER BIN LMZx-Sxxx LMZx-Rxxx LMZx-Qxxx FORWARD VOLTAGE (V) [1] MINIMUM MAXIMUM F 10.5 11.0 G 11.0 11.5 H 11.5 11.7 F 5.25 5.50 G 5.50 5.75 H 5.75 6.00 F 2.63 2.75 G 2.75 2.88 H 2.88 3.00 Notes for Table 9: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. Mechanical Dimensions Figure 8: Mechanical dimensions for LUXEON MZ. Notes for Figure 8: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 15 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 9: Visualization of the acceptable reflow temperature profile as specified in Table 10. Table 10. Reflow profile characteristics for LUXEON MZ. PROFILE FEATURE LEAD-FREE ASSEMBLY Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 120 seconds Ramp-Up Rate (Tsmax to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 11. Moisture sensitivity levels for LUXEON MZ. LEVEL 1 FLOOR LIFE SOAK REQUIREMENTS STANDARD TIME CONDITIONS TIME CONDITIONS Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 16 Solder Pad Design Figure 10: Recommended PCB solder pad layout for LUXEON MZ. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 17 Packaging Information Pocket Tape Dimensions Figure 11: Pocket Tape dimensions for LUXEON MZ. Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 18 Reel Dimensions 16.8mm OUTSIDE WIDTH 12.4mm INSIDE WIDTH 330.00 REEL DIAMETER 13.00mm ARBOR HOLE DIAMETER COVER TAPE DIRECTION OF FEED CARRIER TAPE TAPE REEL Figure 12: Reel dimensions for LUXEON MZ. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS136 LUXEON MZ Product Datasheet 20151125 ©2015 Lumileds Holding B.V. All rights reserved. 19 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. ©2015 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS136 LUXEON MZ Product Datasheet 20151125 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.