ETC2 GPB963L51Z Photologicâ® slotted optical switch opb960, opb970, opb980, op990 sery Datasheet

Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
L
Features:
•
•
•
•
•
•
N
Data rates to 250 kBaud
24” minimum 26 AWG wire leads
Choice of output configuration
Choice of opaque or IR-transmissive shell material
Choice of aperture
Choice of mounting configuration
T
Product Photo Here
P
Description:
The OPB960, OPB970, OPB980 and OPB990 series of Photologic® photo integrated circuit switches provide
optimum flexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a
user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting
configurations. OPB960 through OPB973 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm)
spacing. OPB980 through OPB993 have 24” (609 mm) 26 AWG wires.
All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be
specified as buffered or inverted with Totem-Pole or Open Collector output. Devices are also TTI/LSTTL
compatible and can drive up to 10 TTL loads.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Mechanical switch replacement
• Speed and direction indication
• Mechanical limit indication
• Rotary encoders
• Edge sensing
• Sliding Door Automotive and Liftgate applications
Part Number Guide — OPB980 and OPB990 Series
OPB 9 X X X X X Z
OPTEK Assembly
Photologic™ Pnoto Integrated
Circuit Sensor Family
Discrete Housing Material:
6 — Base mount IR transmissive plastic discrete
shell with PCBoard lead termination
7 — Base mount opaque plastic discrete shell
with PCBoar lead termination
8 — Base mount IR transmissive plastic discrete
shell with wire termination
9 — Base mount opaque plastic discrete shell
with wire termination
Electrical Specifications:
0 — Buffered Totem-Pole Output
1 — Buffered Open-Collector Output
2 — Inverted Totem-Pole Output
3 — Inverted Open-Collector Output
RoHS
All PCBoard Versions RoHS Compliant:
Z = Wire Version RoHS Compliant
Sensor Aperture:
1 = 0.010” [0.25 mm]
5 = 0.050” [1.27 mm]
Emitter Aperture:
1 = 0.010” [0.25 mm]
5 = 0.050” [1.27 mm]
Mounting Configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Sensor-side mounting tab (Photologic side)
T — Two mounting tabs
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 10/06
Page 1 of 7
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
OP960, OP970 Series
Color-Pin
Description
Red-1
Anode
Black-2
Cathode
Green-5
Ground
Blue-4
Output
White-3
Vcc
OP980, OP990 Series
DIMENSIONS ARE IN:
[ MILLIMETERS]
INCHES
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural
failure in OPTEK’s molded plastics.
Applies to: OPB460, OPB470, OPB480, OPB490.
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
Issue B 10/06
Page 2 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
Totem
Pole Output
Totem-Pole-Output
OpenOpen-Collector-Output
Collector Output
Inverted Output Series
Inverted Totem-Pole
Inverted Open Collector
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage Temperature Range
-40°C to +85° C
Operating Temperature Range
-40°C to +70° C
Supply Voltage VCC (not to exceed 3 seconds)
18 V
Input Diode Power Dissipation
100 mW(1)
Output PhotologicTM Power Dissipation
200 mW(2)
Total Device Power Dissipation
300 mW(3)
Voltage at Output Lead (Open Collector Output)
35V
Diode Forward D.C. Current
40 mA
Diode Reverse D.C. Voltage
2V
Notes:
(1) Derate linearly 2.22 mW/°C above 25° C.
(2) Derate linearly 4.44 mW/°C above 25° C.
(3) Derate linearly 6.66 mW/°C above 25° C.
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 10/06
Page 3 of 7
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
Electrical Characteristics (TA = -40°C to + 70°C, VCC = 4.5V to 16.0V unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input Diode (See OP240 for additional information)
VF
Forward Voltage
-
-
1.7
V
IF = 20 mA, TA = 25° C
IR
Reverse Current
-
-
100
µA
VR = 2.0 V, TA = 25° C
Output Photologic® Sensor (See OPL560 series for additional information)
VCC
4.5
-
16.0
V
Peak-to-Peak VCC voltage ripple
necessary to cause false triggering
-
-
2.0
V
ICC
Supply Current
-
8
12
mA
VOL
Low Level Supply Voltage:
Totem-Pole
Open-Collector
Inverted Totem-Pole
Inverted Open-Collector
-
-
0.4
V
VOH
High Level Output Current:
Totem-Pole
Open-Collector
Inverted Totem-Pole
Inverted Open-Collector
VCC-2.1
-
-
V
IOH
High Level Output Current:
Totem-Pole
Open-Collector
Inverted Totem-Pole
Inverted Open-Collector
-
-
100
µA
VOH = 30 V, IF = 15 mA, TA = 25° C
VOH = 30 V, IF = 15 mA, TA = 25° C
VOH = 30 V, IF = 0 mA(5), TA = 25° C
VOH = 30 V, IF = 0 mA(5), TA = 25° C
LED Positive-Going Threshold Current
-
-
15
mA
VCC = 5.0 V, TA = 25° C
-
2.0
-
V
-15
-
-60
mA
VCC = 5.25 V, IF = 15 mA, VOH = GND
VCC = 5.25 V, IF = 0 mA(5), VOH = GND
VR(P-P)
IF(+)
Operating D.C. Supply Voltage
IF(+), IF(-) Hysteresis
f = DC to 50 MHz
VCC = 4.5V to 16.0V
IOL = 12.8 mA, IF = 0 mA
IOL = 12.8 mA, IF = 0 mA
IOL = 12.8 mA, IF = 15 mA(5)
IOL = 12.8 mA, IF = 15 mA(5)
IOH = -1 µA, IF = 15 mA
IOH = -1 µA, IF = 15 mA
IOH = -1 µA, IF = 0 mA(5)
IOH = -1 µA, IF = 0 mA(5)
VCC = 5.0 V
IOS
Short Circuit Output Current:
Totem-Pole
Inverted Totem-Pole
trtr
Output Rise Time, Output Fall Time
-
70
-
ns
VCC = 5 V, TA = 25° C, IF = 0 or 15 mA
Propagation Delay Low-High,
Propagation High-Low
-
5.0
-
µs
RL = 8TTL loads (Totem Pole),
RL = 360 (Open-Collector)
TPLH, TPHL
Notes:
(1) The OPB880/OPB890 series switches are terminated with 24” (609.600 mm) of 7-strand 26 AWG, UL 1429 insulated wire on each
terminal. Insulation colors and functions are: Anode (red), cathode (black), VCC (white), output (blue), and ground (green). Custom
wire lengths and/or colors are available. Contact your local representative or OPTEK for details.
(2) Normal application would be with light source blocked, simulated by IF = 0 mA.
(3) All parameters are tested using pulse techniques.
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
Issue B 10/06
Page 4 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
"55" Aperture - Flag Next to Emitter
"55" Aperture - Flag Next to Sensor
1.2
1.2
Top to Bottom (Back)
Top to Bottom (Back)
Top to Bottom
1.0
1.0
0.8
0.8
Top to Bottom
Right to Left
Right to Left (Back)
Logic
Logic
Right to Left
0.6
Right to Left (Back)
0.6
0.4
0.4
Left to Right
Left to Right
Left to Right (Back)
Left to Right (Back)
0.2
0.2
0.0
0.00
0.05
0.10
0.15
0.20
0.25
0.0
0.00
0.05
Displacement Distance (inches)
0.10
0.15
0.20
0.25
Displacement Distance (inches)
"55" Aperture - Flag in Middle of Slot
1.2
Top to Bottom (Back)
Top to Bottom
1.0
0
Top to Bottom
0.8
Logic
Right to Left
Right to Left (Back)
0.6
Emitter
Left to Right
0.4
Right to Left
Left to Right
Sensor
Left to Right (Back)
0.2
0.0
0.00
0
0.05
0.10
0.15
0.20
Displacement Distance (inches)
Width
0.25
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 10/06
Page 5 of 7
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
"51" Apertures - Flag Next to Emitter
"51" Aperture - Flag Next to Sensor
1.2
1.2
Top to Bottom (Back)
Top to Bottom
Top to Bottom (Back)
1.0
1.0
0.8
0.8
Right to Left
Right to Left
Right to Left (Back)
Logic
Logic
Top to Bottom
0.6
Right to Left (Back)
0.6
0.4
0.4
Left to Right
Left to Right
Left to Right (Back)
Left to Right (Back)
0.2
0.2
0.0
0.00
0.0
0.05
0.10
0.15
0.20
Displacement Distance (inches)
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
"51" Aperture - Flag in Middle of Slot
1.2
Top to Bottom (Back)
Top to Bottom
1.0
0
Top to Bottom
0.8
Logic
Right to Left
Right to Left (Back)
0.6
Emitter
Left to Right
0.4
Right to Left
Left to Right
Left to Right (Back)
Sensor
0.2
0
0.0
0.00
0.05
0.10
0.15
0.20
Width
0.25
Displacement Distance (inches)
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
Issue B 10/06
Page 6 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OP990 Series
For parts built after 2004
"11" Aperture - Flag Next to Emitter
"11" Aperture - Flag Next to Sensor
1.2
1.2
Top to Bottom
Top to Bottom (Back)
Top to Bottom (Back)
1.0
1.0
0.8
0.8
Right to Left
Right to Left
Right to Left (Back)
Logic
Right to Left (Back)
Logic
Top to Bottom
0.6
0.4
0.6
0.4
Left to Right
Left to Right
Left to Right (Back)
Left to Right (Back)
0.2
0.0
0.00
0.2
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
0.0
0.00
0.05
0.10
0.15
0.20
Displacement Distance (inches)
0.25
"11" Aperture - Flag in Middle of Slot
1.2
Top to Bottom (Back)
Top to Bottom
1.0
0
Top to Bottom
0.8
Right to Left
Logic
Right to Left (Back)
0.6
Emitter
Left to Right
0.4
Right to Left
Left to Right
Left to Right (Back)
Sensor
0.2
0
Width
0.0
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 10/06
Page 7 of 7
Similar pages