N NHD‐‐2.4‐‐240320SSF‐C CTXI##‐F1 TFTT (Thin‐‐Film Trransisto or) Liquid Crysttal Disp play Mo odule NHD‐‐ 2.4‐ 2403 320‐ SF‐ C‐ T‐ X‐ I‐ #‐ F‐ 1‐ Newhaven Display 2.4” Diagonal 24 40 x 320 Pixels (Portrait Mode) M Model M Built‐in Contro oller White W LED Baccklight TFT 12 2:00 Optimal View, Wide Temperature T RoHS Compliant FFFC ZIF Connecction Style ILLI9341 Contro oller Newh haven Disp play Intern national, In nc. 2511 Techno ology Drive, SSuite 101 Elggin IL, 60124 Ph: 847‐844‐8795 8 5 Fax: 8847‐844‐87966 www.new whavendisplayy.com nhtech h@newhaven ndisplay.com [email protected] om Document Revision History Revision 0 1 2 Date 9/20/2010 5/9/2012 12/10/2012 3 5/29/2013 4 10/10/2013 5 4/21/2014 Description Initial Release Timing characteristics updated Added wiring diagram. Updated mechanical drawing & electrical characteristics. Controller changed from ILI9340 to ILI9341 Mechanical Drawing, Pin Description, Wiring Diagram, Electrical/Optical Characteristics, Example Code updated Changed optimal viewing direction in datasheet Functions and Features 240 x 320 pixels LED backlight 2.8V power supply 8‐bit or 16‐bit Parallel MPU interface FFC ZIF I/O connection Built‐in ILI9341 controller 262K colors Touch Panel available [2] Changed by BE AK JN AK ML ML L A I Mechanical Drawing 1 2 3 4 A Rev D 1 6 Date GND YD XL YU XR LCD_ID VDD IOVDD FMARK /CS D/C /WR /RD DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 DB8 DB9 DB10 DB11 DB12 DB13 DB14 DB15 /RES IM0 NC GND LED-K1 LED-K2 LED-K3 LED-K4 LED-A GND NC T N F N O C Description E D I B C 5 B C D Date 10/10/13 2 A 3 4 Gen. Tolerance Unit ±0.3mm mm 5 Model: NHD-2.4-240320SF-CTXI#-F1 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] Pin Description Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol GND YD XL YU XR LCD_ID VDD IOVDD FMARK /CS D/C /WR /RD DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 DB8 DB9 DB10 DB11 DB12 DB13 DB14 DB15 /RES IM0 NC GND LED‐K1 LED‐K2 LED‐K3 LED‐K4 LED‐A GND NC External Connection Power Supply ‐ ‐ ‐ ‐ MPU/NC Power Supply Power Supply MPU/NC MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU ‐ Power Supply Power Supply Power Supply Power Supply Power Supply Power Supply Power Supply ‐ Function Description Ground No Connect No Connect No Connect No Connect LCD ID pin (No Connect) Supply Voltage for LCD (2.8V) Supply Voltage for Logic (2.8V) Used when writing RAM data in sync with frame (No Connect) Active LOW Chip Select signal (can tie to GND) Data / Command selection: ‘1’ = Data ; ‘0’ = Command Active LOW Write signal Active LOW Read signal Bi‐directional data bus 8‐bit: use DB8‐DB15 16‐bit: use DB0‐DB15 Active LOW Reset signal IM0=0: 16‐bit i80 IM0=1: 8‐bit i80 No Connect Ground Backlight Cathode (Ground) Backlight Cathode (Ground) Backlight Cathode (Ground) Backlight Cathode (Ground) Backlight Anode (3.2V) Ground No Connect Recommended LCD connector: 40‐pin, 0.5mm pitch FFC connector [4] Molex P/N: 54132‐4062 or similar Wirring Diagram [5] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage for LCD Supply Voltage for Logic Supply Current “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Voltage Backlight Supply Current Symbol Top Tst VDD IOVDD IDD Vih Vil Voh Vol Condition Absolute Max Absolute Max ‐ ‐ VDD=2.8V ‐ ‐ ‐ ‐ Min. ‐20 ‐30 2.5 1.65 ‐ 0.8*VDD GND 0.8*VDD GND Typ. ‐ ‐ 2.8 2.8 7 ‐ ‐ ‐ ‐ Max. +70 +80 3.3 3.3 9 VDD 0.2*VDD VDD 0.2*VDD Unit ⁰C ⁰C V V mA V V V V Vled Iled ‐ Vled=3.2V 2.9 ‐ 3.2 60 3.4 ‐ V mA Symbol ‐ ‐ ‐ ‐ Cr Lv Tr+Tf Condition Min. ‐ ‐ ‐ ‐ 400 ‐ ‐ Typ. 60 70 70 70 500 310 20 Max. ‐ ‐ ‐ ‐ ‐ ‐ 30 Unit ⁰ ⁰ ⁰ ⁰ ‐ cd/m2 ms Optical Characteristics Item Viewing Angle – Top Viewing Angle – Bottom Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time (rise + fall) Cr ≥ 10 ‐ ‐ ‐ Viewing angles based on 6:00 gray scale inversion Controller Information Built‐in ILI9341 controller. Please download specification at http://www.newhavendisplay.com/app_notes/ILI9341.pdf Table of Commands Please download specification at http://www.newhavendisplay.com/app_notes/ILI9341.pdf [6] Tim ming Charracteristiccs Paraallel 18/16//9/8‐bit Intterface Timing Charactteristics (80080‐II systeem) [7] [8] Example Recommended Initialization Code /**************************************************************/ void TFT_24S_Write_Command(int command) { GPIO_ResetBits(GPIOC, DC); GPIO_Write(GPIOB, command); GPIO_ResetBits(GPIOC, nWR); GPIO_SetBits(GPIOC, nWR); } void TFT_24S_Write_Data(int data) { GPIO_SetBits(GPIOC, DC); GPIO_Write(GPIOB, data); GPIO_ResetBits(GPIOC, nWR); GPIO_SetBits(GPIOC, nWR); } /**************************************************************/ void init() { GPIO_ResetBits(GPIOC, CS); GPIO_SetBits(GPIOC, nRD); GPIO_ResetBits(GPIOC, nWR); GPIO_WriteBit(GPIOC, RES, Bit_RESET); delay(120); GPIO_WriteBit(GPIOC, RES, Bit_SET); delay(120); TFT_24S_Write_Command(0x0028); //display OFF TFT_24S_Write_Command(0x0011); TFT_24S_Write_Data(0x0000); //exit SLEEP mode TFT_24S_Write_Command(0x00CB); TFT_24S_Write_Data(0x0039); TFT_24S_Write_Data(0x002C); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0034); TFT_24S_Write_Data(0x0002); //Power Control A //always 0x39 //always 0x2C //always 0x00 //Vcore = 1.6V //DDVDH = 5.6V TFT_24S_Write_Command(0x00CF); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0081); TFT_24S_Write_Data(0x0030); //Power Control B //always 0x00 //PCEQ off //ESD protection TFT_24S_Write_Command(0x00E8); TFT_24S_Write_Data(0x0085); TFT_24S_Write_Data(0x0001); TFT_24S_Write_Data(0x0079); //Driver timing control A //non‐overlap //EQ timing //Pre‐charge timing TFT_24S_Write_Command(0x00EA); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0000); //Driver timing control B //Gate driver timing //always 0x00 [9] TFT_24S_Write_Command(0x00ED); TFT_24S_Write_Data(0x0064); TFT_24S_Write_Data(0x0003); TFT_24S_Write_Data(0x0012); TFT_24S_Write_Data(0x0081); //Power‐On sequence control //soft start //power on sequence //power on sequence //DDVDH enhance on TFT_24S_Write_Command(0x00F7); TFT_24S_Write_Data(0x0020); //Pump ratio control //DDVDH=2xVCI TFT_24S_Write_Command(0x00C0); TFT_24S_Write_Data(0x0026); TFT_24S_Write_Data(0x0004); //power control 1 //second parameter for ILI9340 (ignored by ILI9341) TFT_24S_Write_Command(0x00C1); TFT_24S_Write_Data(0x0011); //power control 2 TFT_24S_Write_Command(0x00C5); TFT_24S_Write_Data(0x0035); TFT_24S_Write_Data(0x003E); //VCOM control 1 TFT_24S_Write_Command(0x00C7); TFT_24S_Write_Data(0x00BE); //VCOM control 2 TFT_24S_Write_Command(0x0036); TFT_24S_Write_Data(0x0088); //memory access control = BGR TFT_24S_Write_Command(0x00B1); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0010); //frame rate control TFT_24S_Write_Command(0x00B6); TFT_24S_Write_Data(0x000A); TFT_24S_Write_Data(0x00A2); //display function control TFT_24S_Write_Command(0x003A); TFT_24S_Write_Data(0x0055); //pixel format = 16 bit per pixel TFT_24S_Write_Command(0x00F2); TFT_24S_Write_Data(0x0002); //3G Gamma control //off TFT_24S_Write_Command(0x0026); TFT_24S_Write_Data(0x0001); //Gamma curve 3 TFT_24S_Write_Command(0x002A); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x00EF); //column address set TFT_24S_Write_Command(0x002B); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0000); TFT_24S_Write_Data(0x0001); TFT_24S_Write_Data(0x003F); //start 0x0000 //end 0x00EF //page address set //start 0x0000 //end 0x013F } [10] Quality Information Test Item Content of Test Test Condition Note High Temperature Storage Endurance test applying the high storage temperature for a long time. +80⁰C, 96hrs 2 Low Temperature Storage High Temperature Operation Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. ‐30⁰C, 96hrs 1,2 +70⁰C, 96hrs 2 Low Temperature Operation Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. ‐20⁰C, 96hrs 1,2 High Temperature / Humidity Operation Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. +50⁰C, 90% RH, 96hrs 1,2 Thermal Shock resistance Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. ‐10⁰C,30min ‐> 25⁰C,5min ‐> 60⁰C,30min = 1 cycle 100 cycles Vibration test Endurance test applying vibration to simulate transportation and use. 10Hz‐55Hz‐10Hz , 1.5mm amplitude. 60 mins in each of 3 directions X,Y,Z Static electricity test Endurance test applying electric static discharge. VS=8KV, RS=330kΩ, CS=150pF Ten times Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information See Terms & Conditions at http://www.newhavendisplay.com/index.php?main_page=terms [11] 3