AIMTEC AM1SS-NZ 1 watt | dc-dc converter Datasheet

Click on Series name for product info on aimtec.com
Series AM1SS-NZ
1 Watt | DC-DC Converter
FEATURES:








Unregulated
4 Pin SIP Package
Low ripple and noise
High efficiency up to 82%
Operating temperature -40oC to +105oC
Input / Output isolation 1500 VDC
Pin compatible with multiple manufacturers
Continuous Short Circuit Protection ‡
Models
Single output
Model
Input Voltage
(V)
Output Voltage
(V)
Output Current
max (mA)
Isolation
(VDC)
Max.
Capacitive
Load (µF)
Efficiency
(%)
2.97-3.63
2.97-3.63
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
10.8-13.2
10.8-13.2
10.8-13.2
10.8-13.2
10.8-13.2
10.8-13.2
13.5-16.5
21.6-26.4
21.6-26.4
21.6-26.4
21.6-26.4
21.6-26.4
21.6-26.4
3.3
5
3.3
5
9
12
15
24
3.3
5
9
12
15
24
15
3.3
5
9
12
15
24
303
200
303
200
111
84
67
42
303
200
110
83
67
42
67
303
200
110
83
67
42
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
75
80
76
80
80
81
81
81
76
80
80
81
80
80
81
76
80
80
81
82
82
AM1SS-0303S-NZ
AM1SS-0305S-NZ
AM1SS-0503S-NZ
AM1SS-0505S-NZ
AM1SS-0509S-NZ
AM1SS-0512S-NZ
AM1SS-0515S-NZ
AM1SS-0524S-NZ ‡
AM1SS-1203S-NZ
AM1SS-1205S-NZ
AM1SS-1209S-NZ
AM1SS-1212S-NZ
AM1SS-1215S-NZ
AM1SS-1224S-NZ
AM1SS-1515S-NZ
AM1SS-2403S-NZ
AM1SS-2405S-NZ
AM1SS-2409S-NZ
AM1SS-2412S-NZ
AM1SS-2415S-NZ
AM1SS-2424S-NZ
‡- Please note Aimtec product change announcement located here www.aimtec.com/news for product specification changes
effective February 7th 2015.
Input Specifications
Parameters
Voltage range
Absolute Max Rating (1 sec. max.)
Nominal
Typical
3.3
5
12
15
24
3.3
5
12
15
24
2.97-3.63
4.5-5.5
10.8-13.2
13.5-16.5
21.6-26.4
Maximum
VDC
5
9
18
21
30
Filter
Units
VDC
Capacitor
Isolation Specifications
Parameters
Tested I/O voltage
Resistance
Capacitance
www.aimtec.com
F 051e R11.B
Conditions
Typical
60 sec
> 1000
20
Tel: +1 514 620 2722
1 of 4
Rated
Units
1500
VDC
MOhm
pF
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1SS-NZ
1 Watt | DC-DC Converter
Output Specifications
Parameters
Voltage accuracy
Short Circuit protection
Conditions
Typical
See tolerance graph
±5
Maximum
Units
%
Continuous with automatic recovery ‡
Line voltage regulation
Load voltage regulation
Temperature coefficient
Ripple & Noise
For 1.0% Vin, 3.3V Model
For 1.0% Vin, Other Model
±1.5
±1.2
% of Vin
Load 10 – 100%
12
±0.03
60
%
%/oC
m Vp-p
At 20 MHz Bandwidth
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100% load
100-300
KHz
oC
Operating temperature
Derating Above 85oC
-40 to +105
oC
Storage temperature
-55 to +125
oC
Maximum case temperature
125
Cooling
Free air convection
Humidity
Non condensing
95
%
oC
Soldering Lead Temperature
1.5mm from Lead, for 10 Sec
300
Case material
Plastic UL94-VO
Weight
1.2
g
Dimensions (L x H x W)
0.46 x 0.40x 0.24 inches
11.60 x 10.10 x 6.00 mm
MTBF
>3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Safety Specifications
Parameters
Agency approvals
Standards
www.aimtec.com
F 051e R11.B
cULus (without 15V input and without 3.3V output models)
UL 60950-1
Tel: +1 514 620 2722
2 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1SS-NZ
1 Watt | DC-DC Converter
Pin Out Specifications
Pin
Single
1
2
3
4
- V Input
+V Input
-V Output
+V Output
Dimensions
6.00
(0.24)
11.60
(0.46)
Printed
Front
AM1SS-XXXXS-NZ
XXXX
7.62
(0.30)
0.50
(0.02)
2.45
(0.10)
Typical Characteristics
www.aimtec.com
F 051e R11.B
Tel: +1 514 620 2722
3 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1SS-NZ
1 Watt | DC-DC Converter
Derating
Recommended Circuit for EMI Class B
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R11.B
Tel: +1 514 620 2722
4 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Similar pages