Pulse M21038-27-31T Mil-std-1553 transformers qpl interface transformers overview Datasheet

MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
TABLE of CONTENTS
QPL MIL-STD-1553 Interface Transformers Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Single Ratio Transformers - Through Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Dual Ratio Transformers - Through Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Dual Ratio Transformers - Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
non-QPL MIL-STD-1553 Interface Transformers Overview
Dual Ratio Transformers - Single Interface, Through Hole, Low Profile
. . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Dual Ratio Transformers - Single Interface, Surface Mount, Low Profile, Flat Pack and Gull Wing . . . . . . . . .13
Dual Ratio Transformers - Dual Interface, Through Hole, Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Dual Ratio Transformers - Dual Interface, Surface Mount, Low Profile, Flat Pack and Gull Wing . . . . . . . . . .15
Dual Ratio Transformers - Dual Interface, Through Hole, Stacked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Dual Ratio Transformers - Dual Interface, Surface Mount, Stacked, Flat Pack and Gull Wing . . . . . . . . . . . .17
Dual Ratio Transformers - Single Interface, Surface Mount, Hermatically-sealed, Flat Pack . . . . . . . . . . . . .18
Dual Ratio Transformers - Single Interface, Through Hole, Standard Profile Value Series (COTS) . . . . . . . .19
Dual Ratio Transformers - Single Interface, Through Hole and Surface Mount, Stacked, Low Profile . . . .20-21
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
1
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
QPL Interface Transformers Overview
QPL MIL-STD-1553 Interface Transformers
As “Technitrol Components Division,” we were the first
to achieve QPL status for MIL-STD-1553B interface
transformers, also known as low-power pulse
transformers. Today, as “Pulse Military Aerospace
Division,” our QPL transformer line includes a wide
selection of products for each of the product levels called
for by MIL-PRF-21038/27, formerly MIL-T-21038/27.
difficulty producing components that can survive the
high-heat rigors of surface mounting and the
performance, reliabliability, part-to-part repeatibility, and
lifespan required by high-rel military and commercial
applications.
The first several pages of this catalog cover all of our
QPL transformer products. Each part has a military designation number (found on DESC/DSCC approved drawings) as well as our own product number. These part
numbers are listed in the specification tables.
We also were the first to achieve QPL status on surfacemount MIL-STD-1553 pulse transformers -- more than
20 years ago. To this day, many manufacturers have
Level C parts are tested to our internal specifications.
Group A or B testing is not performed on Level C parts.
Level M parts is exactly the same as the original QPL
product that was defined by the earlier MIL-T-21038/27
specification. Level T part receives the most extensive
testing along with thermal cycling. For information about
testing to selected levels, see next page.
MIL-PRF-21038E (8 July 1998) supersedes
MIL-T-21038D (11 May 1979) and establishes three
product levels for low power pulse transformers. The
new specification allows designers to select a QPL
device and limit the testing to what is needed for the
application:
■ Level C - for high reliability commercial/industrial
applications;
■ Level M - for general purpose military applications;
■ Level T - for high reliability critical military
applications.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
2
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
QPL Interface Transformers Overview
MIL-PRF-21038/27 Inspection, Sampling, Testing
Table 1 — Group A Inspection
Level “C”**
Level “M”
Level “T”
Tests
Sampling Plan
Tests
Sampling Plan
Tests
Sampling Plan
N/A
N/A
Electrical Characteristics
per MIL-PRF-21038/27
Sample per
Table 3
Thermal Shock
100%
N/A
N/A
Visual and Mechanical
Inspection
Sample per
Table 3
Winding Continuity
100%
N/A
N/A
N/A
N/A
Electrical Characteristics
per MIL-PRF-21038/27
100%
N/A
N/A
N/A
N/A
Impedance
Sample per
Table 3
N/A
N/A
N/A
N/A
Visual and Mechanical
Inspection
Sample per
Table 3
Table 2 — Group B Inspection
Level “C”**
Level “M”
Level “T”
Tests
Sampling Plan
Tests
Sampling Plan
Tests
Sampling Plan
N/A
N/A
Dielectric Withstanding
Voltage
Sample per
Table 3
Dielectric Withstanding
Voltage
Sample per
Table 3
N/A
N/A
Insulation
Resistance
Sample per
Table 3
Insulation
Resistance
Sample per
Table 3
Table 3 — Sampling Plans for Group A and Group B Inspections
Lot Size
Group A, Group II Inspections
Group B
1 to 5
All
All
6 to 13
All
5
14 to 50
13
5
51 to 90
13
7
91 to 150
13
11
151 to 280
20
13
281 to 500
29
16
501 to 1200
34
19
1,201 to 3,200
42
23
3,201 to 10,000
50
29
**NOTE: Parts ordered to Level C are certified to comply with MIL-PRF-21038 Level C, however testing is performed
per manufacturer's internal requirements and sampling rates.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
3
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Single Ratio THT QPL Pulse Transformers
Qualified for use in QPL MIL-STD-1553 applications
Single ratio packages (see Schematics)
Designed, built, and tested to MIL-PRF-21038
Levels* C, M, and T
Package C is 4-lead; package D is 6-lead (center tap)
Built in ISO 9001 facility
Applicable specifications
■ MIL-STD-1553B
■ MIL-STD-202
Summary Performance Specifications
Impedance
(see table below)
■ MIL-PRF-21038
Droop
≤ 20%
■ ISO 9001
Overshoot
±1V MAX
* ■ Level C - for high reliability commercial/industrial applications
Common Mode Rejection (CMR)
≥ 45dB
Frequency Range (no load)
75kHz to 1MHz
■
Level M - for general purpose military applications
Operating Temperature Range
-55°C to 130°C
■
Level T - for high reliability critical military applications
≤ 5 grams
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
10K MΩ @ 250Vdc
100Vrms
Characteristics
Military
Pulse
Package
Designation No.
Part No.
1
C
M21038/27-05C
QC1553-20
2
M
M21038/27-05
Q1553-20
C
3
T
M21038/27-05T
QT1553-20
4
C
M21038/27-06C
QC1553-21
5
M
M21038/27-06
Q1553-21
D
6
T
M21038/27-06T
QT1553-21
7
C
M21038/27-07C
QC1553-22
8
M
M21038/27-07
Q1553-22
D
9
T
M21038/27-07T
QT1553-22
10
C
M21038/27-08C
QC1553-23
11
M
M21038/27-08
Q1553-23
D
12
T
M21038/27-08T
QT1553-23
13
C
M21038/27-09C
QC1553-24
14
M
M21038/27-09
Q1553-24
D
15
T
M21038/27-09T
QT1553-24
16
C
M21038/27-28C
QC1553-25*
17
M
M21038/27-28
Q1553-25*
D
18
T
M21038/27-28T
QT1553-25*
19
C
M21038/27-29C
QC1553-51*
20
M
M21038/27-29
Q1553-51*
D
21
T
M21038/27-29T
QT1553-51*
22
C
M21038/27-30C
QC1553-52*
23
M
M21038/27-30
Q1553-52*
D
24
T
M21038/27-30T
QT1553-52*
*NOTE: Designed for transceivers utilizing a single supply voltage (+5V).
Line
Level
Height
(in. MAX)
Terminals
Ratio
(±3%)
RDC
Ω MAX)
(Ω
Impedance
Ω MIN)
(Ω
.250
1-2:4-3
1:1.41
1-2 2.2
4-3 2.7
(4-3)
3,000
.250
1-5:6.2
1CT:1CT
1-5 2.5
6-2 2.8
(6-2)
3,000
.250
1-5:6.2
1CT:1.41CT
1-5 2.2
6-2 2.7
(6-2)
3,000
.250
1-5:6.2
1CT:1.66CT
1-5 1.5
6-2 2.4
(6-2)
3,000
.250
1-5:6.2
1CT:2CT
1-5 1.3
6-2 2.6
(6-2)
3,000
.250
1-5:6.2
1CT:1.5CT
1-3 0.90
6-2 2.5
(6-2)
3,000
.250
1-5:6.2
1CT:1.79CT
1-5 0.90
6-2 2.5
(6-2)
3,000
.250
1-5:6.2
1CT:2.5CT
1-5 1.0
6-2 2.8
(6-2)
3,000
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
4
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Single Ratio THT QPL Pulse Transformers
Package C
.500 MAX
12,70
4
2
3
1
2
4
1
3
.08
2,03
.350
8,89
MAX
.250
6,35
MAX
.375
9,53
MIN
.34
8,64
.020 ± .002
Ø 0,51 ± 0,05
.200
5,08
.400
10,16
Package D
.500 MAX
12,70
5
6
3
4
1
2
5
3
1
6
4
2
.08
2,03
.100
2,54
.350
8,89
MAX
.250
6,35
MAX
.375
9,53
MIN
.34
8,64
.200
5,08
.400
10,16
.020 ± .002
Ø 0,51 ± 0,05
Notes:
1. All dimensions are in inches.
2. Tolerances: .xx = +.010, .xxx = +.008
3. All specifications and dimensions
are subject to change without notice.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
5
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Dual Ratio THT QPL Pulse Transformers
Qualified for use in QPL MIL-STD-1553 applications
Dual ratio in a single package (see Schematic)
Designed, built, and tested to MIL-PRF-21038
Levels* C, M, and T
Two packages available: Package A without standoffs,
and Package G with standoffs
Built in ISO 9001 facility
Applicable specifications
■ MIL-STD-1553B
■ MIL-STD-202
Summary Performance Specifications
Impedance
(see next page)
■ MIL-PRF-21038
Droop
≤ 20%
■ ISO 9001
Overshoot
±1V MAX
* ■ Level C - for high reliability commercial/industrial applications
Common Mode Rejection (CMR)
≥ 45dB
Frequency Range (no load)
75kHz to 1MHz
■
Level M - for general purpose military applications
Operating Temperature Range
-55°C to 130°C
■
Level T - for high reliability critical military applications
≤ 5 grams
Weight
Insualtion Resistance (MIN)
10K MΩ @ 250Vdc
Dielectric Withstanding Voltage
100Vrms
Package A
Package G
.625 MAX
15,86
8
7
6
5
4
3
2
1
3
.625 MAX
15,86
8
7
6
5
4
2
1
.625
15,86
MAX
.375
9,53
MIN
.100
2,54
.200
5,08
2
1
.250
6,35
MAX
3
8
7
6
5
4
3
8
7
6
5
4
2
1
.250
6,35
MAX
.020
0,51
.375
9,53
MIN
.020 ± .002
Ø 0,51 ± 0,05
.100
2,54
.500
12,70
.625
15,86
MAX
.200
5,08
.020 ± .002
Ø 0,51 ± 0,05
.500
12,70
Notes:
1. All dimensions are in inches.
2. Tolerances: .xx = +.008
3. All specifications and dimensions
are subject to change without notice.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
6
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Dual Ratio THT QPL Pulse Transformers
Characteristics
Line
Level
Military
Designation No.
Pulse
Part No.
1
C
M21038/27-01C
QC1553-1
2
M
M21038/27-01
Q1553-1
3
T
M21038/27-01T
QT1553-1
4
C
M21038/27-02C
QC1553-2
5
M
M21038/27-02
Q1553-2
6
T
M21038/27-02T
QT1553-2
7
C
M21038/27-03C
QC1553-3
8
M
M21038/27-03
Q1553-3
9
T
M21038/27-03T
QT1553-3
10
C
M21038/27-10C
QC1553-5*
11
M
M21038/27-10
Q1553-5*
12
T
M21038/27-10T
QT1553-5*
13
C
M21038/27-21C
QC1553-81
14
M
M21038/27-21
Q1553-81
15
T
M21038/27-21T
QT1553-81
16
C
M21038/27-22C
QC1553-82
17
M
M21038/27-22
Q1553-82
18
T
M21038/27-22T
QT1553-82
19
C
M21038/27-23C
QC1553-83
20
M
M21038/27-23
Q1553-83
21
T
M21038/27-23T
QT1553-83
22
C
M21038/27-24C
QC1553-84*
23
M
M21038/27-24
Q1553-84*
24
T
M21038/27-24T
QT1553-84*
25
C
M21038/27-25C
QC1553-85*
26
M
M21038/27-25
Q1553-85*
27
T
M21038/27-25T
QT1553-85*
28
C
M21038/27-26C
QC1553-45*
29
M
M21038/27-26
Q1553-45*
30
T
M21038/27-26T
QT1553-45*
Package
Height
(in. MAX)
A
.250
A
.250
A
.250
A
.250
G
.275
G
.275
G
.275
G
.275
G
.275
A
.250
Terminals
Ratio
(±3%)
RDC
Ω MAX)
(Ω
Impedance
Ω MIN)
(Ω
1-3:4-8
1CT:1CT
1-3 3.0
(1-3)
1-3:5-7
1CT:.707CT
4-8 3.0
4,000
1-3:4-8
1.4CT:1CT
1-3 3.5
(1-3)
1-3:5-7
2CT:1CT
4-8 3.0
7,200
1-3:4-8
1.25CT:1CT
1-3 3.2
(1-3)
1-3:5-7
1.66CT:1CT
4-8 3.0
4,000
1-3:4-8
1CT:2.12CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.5CT
4-8 3.5
4,000
1-3:4-8
1CT:1CT
1-3 3.0
(1-3)
1-3:5-7
1CT:.707CT
4-8 3.0
4,000
1-3:4-8
1.4CT:1CT
1-3 3.5
(1-3)
1-3:5-7
2CT:1CT
4-8 3.0
7,200
1-3:4-8
1.25CT:1CT
1-3 3.2
(1-3)
1-3:5-7
1.66CT:1CT
4-8 3.0
4,000
1-3:4-8
1CT:2.12CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.5CT
4-8 3.5
4,000
1-3:4-8
1CT:2.50CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.79CT
4-8 3.5
4,000
1-3:4-8
1CT:2.50CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.79CT
4-8 3.5
4,000
*NOTE: Designed for transceivers utilizing a single supply voltage (+5V).
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
7
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Dual Ratio SMT QPL Pulse Transformers
Qualified for use in QPL MIL-STD-1553 applications
Dual ratio in a single package (see Schematic)
Designed, built, and tested to MIL-PRF-21038
Levels* C, M, and T
Two packages available: Package B has gull-wing
leads, and Package F is flat pack
Built in ISO 9001 facility
Applicable specifications
■ MIL-STD-1553B
Summary Performance Specifications
■ MIL-STD-202
Impedance
(see next page)
■ MIL-PRF-21038
Droop
≤ 20%
■ ISO 9001
Overshoot
±1V MAX
* ■ Level C - for high reliability commercial/industrial applications
Common Mode Rejection (CMR)
≥ 45dB
Frequency Range (no load)
75kHz to 1MHz
■
Level M - for general purpose military applications
Operating Temperature Range
-55°C to 130°C
■
Level T - for high reliability critical military applications
≤ 5 grams
Weight
Insualtion Resistance (MIN)
10K MΩ @ 250Vdc
Dielectric Withstanding Voltage
100Vrms
Package B
8
7
6
5
4
3
2
1
.200
5,08
TYP
Package F
Notes:
1. All dimensions are in inches.
2. Tolerances: .xx = +.008
3. All specifications and dimensions
are subject to change without notice.
.100
2,54
TYP
.625 MAX
15,86
3
2
1
8
7
6
5
4
2
1
.100
2,54
TYP
.625 MAX
15,86
.200
5,08
TYP
3
.625
15,86
MAX
2
1
.020 ± .002
.032
Ø 0,81 TYP
8
7
6
5
4
3
8
7
6
5
4
.625
15,86
MAX
.020 ± .002
Ø 0,51 ± 0,05
Ø 0,51 ± 0,05
.250
6,35
MAX
.070 ± .015
1,78 ± 0,38
.250 ± .030
6,35 ± 0,76
.250
6,35
MAX
.004
0,10
MIN
.500
12,70
MIN
.137 ± .020
3,48 ± 0,51
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
8
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Dual Ratio SMT QPL Pulse Transformers
Characteristics
Line
Level
Military
Designation No.
Pulse
Part No.
1
C
M21038/27-11C
SMQC1553-6
2
M
M21038/27-11
SMQ1553-6
3
T
M21038/27-11T
SMQT1553-6
4
C
M21038/27-12C
SMQC1553-7
5
M
M21038/27-12
SMQ1553-7
6
T
M21038/27-12T
SMQT1553-7
7
C
M21038/27-13C
SMQC1553-8
8
M
M21038/27-13
SMQ1553-8
9
T
M21038/27-13T
SMQT1553-8
10
C
M21038/27-15C
SMQC1553-10*
11
M
M21038/27-15
SMQ1553-10*
12
T
M21038/27-15T
SMQT1553-10*
13
C
M21038/27-16C
FPQC1553-6
14
M
M21038/27-16
FPQ1553-6
15
T
M21038/27-16T
FPQT1553-6
16
C
M21038/27-17C
FPQC1553-7
17
M
M21038/27-17
FPQ1553-7
18
T
M21038/27-17T
FPQT1553-7
19
C
M21038/27-18C
FPQC1553-8
20
M
M21038/27-18
FPQ1553-8
21
T
M21038/27-18T
FPQT1553-8
22
C
M21038/27-20C
FPQC1553-10*
23
M
M21038/27-20
FPQ1553-10*
24
T
M21038/27-20T
FPQT1553-10*
25
C
M21038/27-27C
SMQC1553-45*
26
M
M21038/27-27
SMQ1553-45*
27
T
M21038/27-27T
SMQT1553-45*
28
C
M21038/27-31C
FPQC1553-45*
29
M
M21038/27-31
FPQ1553-45*
30
T
M21038/27-31T
FPQT1553-45*
Package
Height
(in. MAX)
B
.250
B
.250
B
.250
B
.250
F
.250
F
.250
F
.250
F
.250
B
.250
F
.250
Terminals
Ratio
(±3%)
RDC
Ω MAX)
(Ω
Impedance
Ω MIN)
(Ω
1-3:4-8
1CT:1CT
1-3 3.0
(1-3)
1-3:5-7
1CT:.707CT
4-8 3.0
4,000
1-3:4-8
1.4CT:1CT
1-3 3.5
(1-3)
1-3:5-7
2CT:1CT
4-8 3.0
7,200
1-3:4-8
1.25CT:1CT
1-3 3.2
(1-3)
1-3:5-7
1.66CT:1CT
4-8 3.0
4,000
1-3:4-8
1CT:2.12CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.5CT
4-8 3.5
4,000
1-3:4-8
1CT:1CT
1-3 3.0
(1-3)
1-3:5-7
1CT:.707CT
4-8 3.0
4,000
1-3:4-8
1.4CT:1CT
1-3 3.5
(1-3)
1-3:5-7
2CT:1CT
4-8 3.0
7,200
1-3:4-8
1.25CT:1CT
1-3 3.2
(1-3)
1-3:5-7
1.66CT:1CT
4-8 3.0
4,000
1-3:4-8
1CT:2.12CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.5CT
4-8 3.5
4,000
1-3:4-8
1CT:2.50CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.79CT
4-8 3.5
4,000
1-3:4-8
1CT:2.50CT
1-3 1.0
(4-8)
1-3:5-7
1CT:1.79CT
4-8 3.5
4,000
*NOTE: Designed for transceivers utilizing a single supply voltage (+5V).
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
9
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
non-QPL Interface Transformers Overview
COTS Transformers
Pulse has developed many low-power pulse transformer
products in response to the Perry Initiative and its
COTS mandate. Several of our QPL transformers have
COTS counterparts. They have the same component
layout and electrical characteristics but they’re built for
commercially-oriented requirements, and manufactured
in higher volume at lower cost. We’ve noted where a
COTS counterpart to a QPL product exists with the
symbol shown here.
More non-QPL 1553 Transformers
Other non-QPL pulse transformers available have
performance and electrical characteristics compliant with
MIL-PRF-21038/27, but have been developed for special
applications:
■ Low profile for reduced board-stacking height
■ Single- ratio and dual-ratio
■ Single interface and dual interface
■ Vertically stacked dual interface
■ 0-70 C or -40 to +85OC or -55 to +125OC
O
■ Hermetically sealed for extreme environments
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
10
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
non-QPL Interface Transformers Overview
■ Low profile
■ Dual ratio
■ Through-the-board
See page 12
■ Low profile
■ Dual ratio
■ Surface-mount flat pack
See page 13
■ Low profile
■ Dual ratio
■ Surface-mount gull wing
See page 13
■ Dual interface
■ Low profile
■ Dual ratio
■ Through-the-board
See page 14
■ Dual interface
■ Low profile
■ Dual ratio
■ Surface-mount flat pack
See page 15
■ Dual interface
■ Low profile
■ Dual ratio
■ Surface-mount gull wing
See page 15
■ Dual interface
■ Stacked
■ Dual ratio
■ Through-the-board
See page 16
■ Dual interface
■ Stacked
■ Dual ratio
■ Surface-mount flat pack
See page 17
■ Dual interface
■ Stacked
■ Dual ratio
■ Surface-mount gull wing
See page 17
Value Series _ COTS
Hermetically Sealed
■ Standard profile
■ Dual-ratio
■ Through-the-board
See page 19
■ Single interface
■ Dual ratio
■ Surface-mount flat pack
See page 18
■ Dual interface
■ Low profile
■ Dual ratio
■ Through-the-board
See page 20-21
■ Dual interface
■ Low profile
■ Dual ratio
■ Surface-mount flat pack
See page 20-21
The package shown here as
“Value Series COTS” is also
available fully qualified to
MIL-PRF-21038/27 requirements. See page 6
■ Dual interface
■ Low profile
■ Dual ratio
■ Surface-mount gull wing
See page 20-21
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
11
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Low Profile THT non-QPL Interface
Transformers
These non-QPL interface transformers are built and tested in ISO 9001
approved facilities. They conform to all electrical and physical parameters
of MIL-PRF-21038/27. Choose one of three operating temperature ranges
including 0° to +70°C, -40° to +85°C, or -55° to +125°C.
Dual ratio, single interface (see schematic)
Through-the-board package
For use in MIL-STD-1553 applications
Low profile, 0.155 inches height
Operating Temp.
Prefix
Performance to MIL-PRF-21038 requirements
0° to 70°C
TLC
-40° to +85°C
TLN
Built in ISO 9001 facility
-55° to +125°C
TL
Applicable specifications:
■ MIL-STD-1553B
■ MIL-PRF-21038
Summary Performance Specifications
■ MIL-STD-202
■ ISO 9001
Impedance
(see table below)
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
(see table above)
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
8
7
6
5
4
3
Schematic
2
1
Characteristics
1
Part Number
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
(XXX)1553-1
1-3 : 4-8
1-3 : 5-7
1CT:1CT
1CT:.707CT
1-3 = 3.0
4-8 = 3.0
(1-3)
4,000
(XXX)1553-2
1-3 : 4-8
1-3 : 5-7
1.4CT:1CT
2CT:1CT
1-3 = 3.5
4-8 = 3.0
(1-3)
7,200
(XXX)1553-3
1-3 : 4-8
1-3 : 5-7
1.25CT:1CT
1.66CT:1CT
1-3 = 3.2
4-8 = 3.0
(1-3)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.12CT
1CT:1.5CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.5CT
1CT:1.79CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
(XXX)1553-5
2
(XXX)1553-45
2
NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V).
.630 MAX
16,00
.100 TYP
2,54
.010 TYP
0,25
87 654
Mechanical
Notes:
1. All dimensions are in inches.
2. Tolerances: .xx = +.008
3. All specifications and dimensions
are subject to change without notice.
.630
16,00
MAX
.155 MAX
3,94
3
2
1
.020 TYP
0,51
.200 TYP
5,08
.700 ± .020
17,78 ± 0,51
.100 MIN
2,54
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
12
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Low Profile SMT non-QPL Interface
Transformers
These non-QPL interface transformers are built and tested in ISO 9001
approved facilities. They conform to all electrical and physical parameters
of MIL-PRF-21038/27. Choose one of three operating temperature ranges
including 0° to +70°C, -40° to +85°C, or -55° to +125°C.
Operating
Temperature
Flat Pack
Prefix
Gull Wing
Prefix
0° to 70°C
FLC
GLC
-40° to +85°C
FLN
GLN
-55° to +125°C
FL
GL
Dual ratio, single interface (see schematic)
Surface Mount, flat pack or gull wing package
For use in MIL-STD-1553 applications
Low profile, 0.155 inches height
Performance to MIL-PRF-21038 requirements
Built in ISO 9001 facility
Applicable specifications:
■ MIL-STD-1553B
■ MIL-PRF-21038
■ MIL-STD-202
■ ISO 9001
Summary Performance Specifications
Impedance
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
(see table below)
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
(see table above)
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
8
7
6
5
4
3
Schematic
2
1
Characteristics
1
Part Number
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
(XXX)1553-1
1-3 : 4-8
1-3 : 5-7
1CT:1CT
1CT:.707CT
1-3 = 3.0
4-8 = 3.0
(1-3)
4,000
(XXX)1553-2
1-3 : 4-8
1-3 : 5-7
1.4CT:1CT
2CT:1CT
1-3 = 3.5
4-8 = 3.0
(1-3)
7,200
(XXX)1553-3
1-3 : 4-8
1-3 : 5-7
1.25CT:1CT
1.66CT:1CT
1-3 = 3.2
4-8 = 3.0
(1-3)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.12CT
1CT:1.5CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.5CT
1CT:1.79CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
(XXX)1553-5
2
(XXX)1553-45
2
NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V).
Flat Pack
.630 MAX
16,00
.200
5,08
TYP
Mechanicals
3
.020 TYP
0,51
2
1
Notes:
1. All dimensions: in inches.
2. Tolerances: .xx = +.008
3. All specifications and
dimensions are subject
to change without notice.
Gull Wing
.155 MAX
3,94
.100 TYP
2,54
.630 MAX
16,00
.200
5,08
TYP
3
8
7
6
5
4
.630
16,00
MAX
.010 TYP
0,25
.020 TYP
0,51
2
1
8
7
6
5
4
.155 MAX
3,94
.070 ± .015
1,78 ± 0,38
.200 MIN
5,08
.100 TYP
2,54
.630
16,00
MAX
.010 TYP
0,25
.230 ± .030
5,84 ± 0,76
.004
0,10
MIN
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
13
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Low Profile Dual THT non-QPL Interface
Transformers
These non-QPL interface transformers are built and tested in ISO 9001
approved facilities. They conform to all electrical and physical parameters
of MIL-PRF-21038/27. Choose one of three operating temperature ranges
including 0° to +70°C, -40° to +85°C, or -55° to +125°C.
Operating Temp.
Dual ratio, dual interface (see schematic)
Through-the-board package
For use in MIL-STD-1553 applications
Low profile, 0.155 inches height
Performance to MIL-PRF-21038 requirements
Built in ISO 9001 facility
Applicable specifications:
■ MIL-STD-1553B
■ MIL-STD-202
9
■ MIL-PRF-21038
10
8
■ ISO 9001
11
Prefix
0° to 70°C
DTLC
-40° to +85°C
DTLN
-55° to +125°C
DTL
Summary Performance Specifications
Impedance
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
(see table below)
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
(see table above)
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
12
13
14
4
15
16
Schematic
7
6
5
3
2
1
Characteristics
Part Number
1
(XXXX)1553-1
(XXXX)1553-2
(XXXX)1553-3
(XXXX)1553-5
2
(XXXX)1553-45
2
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1CT:1CT
1CT:.707CT
1.4CT:1CT
2CT:1CT
1.25CT:1CT
1.66CT:1CT
1CT:2.12CT
1CT:1.5CT
1CT:2.5CT
1CT:1.79CT
1-3, 5-7 = 3.0
16-13, 12-9 = 3.0
(1-3, 5-7)
4,000
1-3, 5-7 = 3.5
16-13, 12-9 = 3.0
(1-3, 5-7)
7,200
1-3, 5-7 = 3.2
16-13, 12-9 = 3.0
(1-3, 5-7)
4,000
1-3, 5-7 = 1.0
16-13, 12-9 = 3.5
(16-13, 12-9)
4,000
1-3, 5-7 = 1.0
16-13, 12-9 = 3.5
(16-13, 12-9)
4,000
NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V).
.930 MAX
23,62
16
Mechanical
Notes:
1. All dimensions are in inches.
2. Tolerances: .xx = +.008
3. All specifications and dimensions
are subject to change without notice.
14X .100 TYP
2,54
.010 TYP
0,25
9
.630
16,00
MAX
.155 MAX
3,94
.700 ± .020
17,78 ± 0,51
8
.020 TYP
0,51
.100 MIN
2,54
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
14
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Low Profile SMT Dual non-QPL Interface
Transformers
These non-QPL interface transformers are built and tested in ISO 9001
approved facilities. They conform to all electrical and physical parameters
of MIL-PRF-21038/27. Choose one of three operating temperature ranges
including 0° to +70°C, -40° to +85°C, or -55° to +125°C.
Operating
Temperature
Flat Pack
Prefix
Gull Wing
Prefix
0° to 70°C
DFLC
DGLC
-40° to +85°C
DFLN
DGLN
-55° to +125°C
DFL
DGL
Dual ratio, dual interface (see schematic)
Surface Mount, flat pack or gull wing package
For use in MIL-STD-1553 applications
Low profile, 0.155 inches height
Performance to MIL-PRF-21038 requirements
Built in ISO 9001 facility
Applicable specifications:
■ MIL-STD-1553B
■ MIL-STD-202
9
7
■ MIL-PRF-21038
10
6
8
■ ISO 9001
11
Summary Performance Specifications
Impedance
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
(see table below)
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
(see table above)
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
Schematic
12
13
14
4
15
16
5
3
2
1
Characteristics
Part Number
1
(XXXX)1553-1
(XXXX)1553-2
(XXXX)1553-3
(XXXX)1553-5
2
(XXXX)1553-45
2
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1-3 : 16-13 / 5-7 : 12-9
1-3 : 15-14 / 5-7 : 11-10
1CT:1CT
1CT:.707CT
1.4CT:1CT
2CT:1CT
1.25CT:1CT
1.66CT:1CT
1CT:2.12CT
1CT:1.5CT
1CT:2.5CT
1CT:1.79CT
1-3, 5-7 = 3.0
16-13, 12-9 = 3.0
(1-3, 5-7)
4,000
1-3, 5-7 = 3.5
16-13, 12-9 = 3.0
(1-3, 5-7)
7,200
1-3, 5-7 = 3.2
16-13, 12-9 = 3.0
(1-3, 5-7)
4,000
1-3, 5-7 = 1.0
16-13, 12-9 = 3.5
(16-13, 12-9)
4,000
1-3, 5-7 = 1.0
16-13, 12-9 = 3.5
(16-13, 12-9)
4,000
NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V).
Flat Pack
.930 MAX
23,62
14X .100 TYP
2,54
Mechanicals
16
Notes:
1. All dimensions are in inches.
2. Tolerances: .xx = +.008
3. All specifications and dimensions
are subject to change without notice.
Gull Wing
.010 TYP
0,25
.010 TYP
0,25
9
.630
16,00
MAX
.155 MAX
3,94
.155 MAX
3,94
8
.200 MIN
5,08
.020 TYP
0,51
.004
0,10
MIN
.230 ± .030
5,84 ± 0,76
.070 ± .015
1,78 ± 0,38
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
15
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Stacked Dual THT non-QPL Interface
Transformers
These non-QPL interface transformers are built and tested in ISO 9001
approved facilities. They conform to all electrical and physical parameters
of MIL-PRF-21038/27. Choose one of three operating temperature ranges
including 0° to +70°C, -40° to +85°C, or -55° to +125°C.
Operating Temp.
Prefix
0° to 70°C
STQC
-40° to +85°C
STQN
-55° to +125°C
STQ
Summary Performance Specifications
Impedance
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
(see table below)
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
(see table above)
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
Dual ratio, dual interface (see schematic)
Through-the-board package
For use in MIL-STD-1553 applications
Vertically stacked for minimum XY area
Performance to MIL-PRF-21038 requirements
Built in ISO 9001 facility
Applicable specifications:
■ MIL-STD-1553B
■ MIL-STD-202
■ MIL-PRF-21038
■ ISO 9001
8 (18)
7 (17)
6 (16)
5 (15)
4 (14)
3 (13)
Schematic
2 (12)
1 (11)
Characteristics
Part Number
1
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
(XXXX)1553-1
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1-3 (11-13) = 3.5
4-8 (14-18) = 3.0
(1-3 & 11-13)
4,000
(XXXX)1553-2
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1CT:1CT
1CT:.707CT
1.4CT:1CT
2CT:1CT
1-3 (11-13) = 3.0
4-8 (14-18) = 3.0
(1-3 & 11-13)
7,200
(XXXX)1553-3
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1.25CT:1CT
1.66CT:1CT
1-3 (11-13) = 3.2
4-8 (14-18) = 3.0
(1-3 & 11-13)
4,000
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1CT:2.12CT
1CT:1.5CT
1-3 (11-13) = 1.0
4-8 (14-18) = 3.5
(4-8 & 14-18)
4,000
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1CT:2.5CT
1CT:1.79CT
1-3 (11-13) = 1.0
4-8 (14-18) = 3.5
(4-8 & 14-18)
4,000
(XXXX)1553-5
2
(XXXX)1553-45
2
NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V).
.340
8,64 MAX
.630 MAX
16,00
Mechanical
Notes:
1. All dimensions: in inches.
2. Tolerances: .xx = +.008
3. All specifications and
dimensions are subject
to change without notice.
.500
12,70
.100
2,54
18 1 2 3
17
16
15
14
13 12 11
4
5
6
7
8
.375
9,53
MIN
.630
16,00
MAX
.020 ± .002
.500
12,70
Ø 0,51 ± 0,05
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
16
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Stacked Dual SMT non-QPL Interface
Transformers
These non-QPL interface transformers are built and tested in ISO 9001
approved facilities. They conform to all electrical and physical parameters
of MIL-PRF-21038/27. Choose one of three operating temperature ranges
including 0° to +70°C, -40° to +85°C, or -55° to +125°C.
Operating
Temperature
Flat Pack
Prefix
Gull Wing
Prefix
0° to 70°C
SFQC
SGQC
-40° to +85°C
SFQN
SGQN
-55° to +125°C
SFQ
SGQ
Dual ratio, dual interface (see schematic)
Surface Mount package
For use in MIL-STD-1553 applications
Vertically stacked for minimum XY area
Performance to MIL-PRF-21038 requirements
Built in ISO 9001 facility
Applicable specifications:
■ MIL-STD-1553B
■ MIL-STD-202
■ MIL-PRF-21038
8 (18)
3 (13)
■ ISO 9001
7 (17)
6 (16)
Schematic 2 (12)
5
Summary Performance Specifications
Impedance
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
(see table below)
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
(see table above)
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
(15)
4 (14)
1 (11)
Characteristics
Part Number
1
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
(XXXX)1553-1
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1-3 (11-13) = 3.5
4-8 (14-18) = 3.0
(1-3 & 11-13)
4,000
(XXXX)1553-2
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1CT:1CT
1CT:.707CT
1.4CT:1CT
2CT:1CT
1-3 (11-13) = 3.0
4-8 (14-18) = 3.0
(1-3 & 11-13)
7,200
(XXXX)1553-3
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1.25CT:1CT
1.66CT:1CT
1-3 (11-13) = 3.2
4-8 (14-18) = 3.0
(1-3 & 11-13)
4,000
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1CT:2.12CT
1CT:1.5CT
1-3 (11-13) = 1.0
4-8 (14-18) = 3.5
(4-8 & 14-18)
4,000
1-3 : 4-8 (11-13 : 14-18)
1-3 : 5-7 (11-13 : 15-17)
1CT:2.5CT
1CT:1.79CT
1-3 (11-13) = 1.0
4-8 (14-18) = 3.5
(4-8 & 14-18)
4,000
(XXXX)1553-5
2
(XXXX)1553-45
2
NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V).
Flat Pack
Gull Wing
.630 MAX
16,00
.630 MAX
16,00
.100 TYP
2,54
.020 ± .002
Ø 0,51 ± 0,05
Mechanicals
Notes:
1. All dimensions: in inches.
2. Tolerances: .xx = +.008
3. All specifications and
dimensions are subject
to change without notice.
.340
8,64
MAX
14
15
16
17
18
1312 11
1 2 3
8
7
6
5
4
.630
16,00
MAX
1.125 ± .030
28,58 ± 0,76
14
15
16
17
18
13 12 11
1 2 3
8
7
6
5
4
.100 TYP
2,54
.630
16,00
MAX
.020 ± .002
Ø 0,51 ± 0,05
.500
16,00
MIN
.070 ± .015
1,78 ± 0,38
.340
8,64
MAX
.250 ± .030
6,35 ± 0,76
.004
0,10
MIN
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
17
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Hermatically-sealed SMT Dual non-QPL
Interface Transformers
These hermatically sealed non-QPL interface transformers are built
and tested in ISO 9001 approved facilities. They conform to all
electrical and physical parameters of MIL-PRF-21038/27 and
provide performance as required over -55° to +125°C.
Dual ratio, single interface (see schematic)
Surface Mount, flat pack package
For use in MIL-STD-1553 applications
Performance to MIL-PRF-21038 requirements
Built in ISO 9001 facility
Applicable specifications:
■ MIL-STD-1553B
■ MIL-STD-202
■ MIL-PRF-21038
■ ISO 9001
Summary Performance Specifications
Impedance
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
(see table below)
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
-55° to +125°C
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
8
7
6
5
4
3
Schematic
2
1
Characteristics
Part Number
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
H1553-1
1-3 : 4-8
1-3 : 5-7
1CT:1CT
1CT:.707CT
1-3 = 3.0
4-8 = 3.0
(1-3)
4,000
H1553-2
1-3 : 4-8
1-3 : 5-7
1.4CT:1CT
2CT:1CT
1-3 = 3.5
4-8 = 3.0
(1-3)
7,200
H1553-3
1-3 : 4-8
1-3 : 5-7
1.25CT:1CT
1.66CT:1CT
1-3 = 3.2
4-8 = 3.0
(1-3)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.12CT
1CT:1.5CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.5CT
1CT:1.79CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
H1553-5
1
H1553-45
1
NOTE: 1. Designed for transceivers utilizing a single supply voltage (+5V).
.635 MAX
16,13
.200
5,08
TYP
Mechanical
3
.015 TYP
0,38
2
1
Notes:
1. All dimensions are in inches.
2. Tolerances: .xx = +.008
3. All specifications and dimensions
are subject to change without notice.
.175 MAX
4,45
.100 TYP
2,54
8
7
6
5
4
.635
16,13
MAX
.010 TYP
0,25
.250 MIN
6,35
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
18
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Value Series (COTS) THT non-QPL
Interface Transformers
These non-QPL interface transformers are built and tested in ISO 9001
approved facilities. They conform to all electrical and physical parameters
of MIL-PRF-21038/27. Choose one of three operating temperature ranges
including 0° to +70°C, -40° to +85°C, or -55° to +125° C.
Operating Temp.
Prefix
0° to 70°C
C
-40° to +85°C
N
-55° to +125°C
TQ
Summary Performance Specifications
Impedance
Droop
Overshoot
Common Mode Rejection (CMR)
Frequency Range (no load)
Operating Temperature Range
Weight
Insualtion Resistance (MIN)
Dielectric Withstanding Voltage
(see table below)
≤ 20%
±1V MAX
≥ 45dB
75kHz to 1MHz
(see table above)
≤ 5 grams
10K MΩ @ 250Vdc
100Vrms
Dual ratio, single interface (see schematic)
Through-the-board package
For use in MIL-STD-1553 applications
Standard height: 0.250 in.
Performance to MIL-PRF-21038 requirements
Built in ISO 9001 facility
Applicable specifications:
■ MIL-STD-1553B
■ MIL-STD-202
■ MIL-PRF-21038
■ ISO 9001
8
7
6
5
4
3
2
Schematic
1
Characteristics
Part Number
Termimals
Ratio (±3%)
RDC (Ω MAX)
Impedance (Ω MIN)
1-3 : 4-8
1-3 : 5-7
1CT:1CT
1CT:.707CT
1-3 = 3.0
4-8 = 3.0
(1-3)
4,000
(X)1553-2
1-3 : 4-8
1-3 : 5-7
1.4CT:1CT
2CT:1CT
1-3 = 3.5
4-8 = 3.0
(1-3)
7,200
(X)1553-3
1-3 : 4-8
1-3 : 5-7
1.25CT:1CT
1.66CT:1CT
1-3 = 3.2
4-8 = 3.0
(1-3)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.12CT
1CT:1.5CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
1-3 : 4-8
1-3 : 5-7
1CT:2.5CT
1CT:1.79CT
1-3 = 1.0
4-8 = 3.5
(4-8)
4,000
(X)1553-1
(X)1553-5
1
2
(X)1553-45
2
NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V).
3
2
1
.625 MAX
15,86
Mechanical
Notes:
1. All dimensions: in inches.
2. Tolerances: .xx = +.008
3. All specifications and
dimensions are subject
to change without notice.
.375
9,53
MIN
.100
2,54
.200
5,08
8
7
6
5
4
.625
15,86
MAX
.250
6,35
MAX
.020 ± .002
.500
12,70
Ø 0,51 ± 0,05
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
19
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Low Profile / Stacked Dual THT and SMT
non-QPL Interface Transformers
Built and tested to MIL-PRF-21038
Withstands 220°C IR/Reflow temperature
Operating & storage temperature:
-55°C to +130°C
Through-hole, Flat-pack and SMT
mount configurations
Electrical Specifications
Part
Number
Terminal
Configuration
Ratio
(±3%)
RDC
(Ω MAX)
Impedance
(Ω MIN)
Droop
Overshoot
(MAX)
Common Mode
Rejection
(CMR)
Frequency Insulation
Dielectric
Range
Resistance Withstanding
(no load)
(mΩ MIN)
Voltage
THROUGH-HOLE
1-3:4-8 (11-13:14-18) 1CT:1CT
1-3 (11-13) 3.5 (1-3 & 11-13)
≤20%
±1V
1-3:5-7 (11-13:15-17) 1.4CT:1CT 4-8 (14-18) 3.5
4,000
1-3:4-8 (11-13:14-18) 1.4CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13)
SLQT1553-2
≤20%
±1V
1-3:5-7 (11-13:15-17) 2CT:1CT
4-8 (14-18) 3.2
7,200
1-3:4-8 (11-13:14-18) 1.25CT:1CT 1-3 (11-13) 3.2 (1-3 & 11-13)
SLQT1553-3
≤20%
±1V
1-3:5-7 (11-13:15-17) 1.66CT:1CT 4-8 (14-18) 3.0
4,000
1-3:4-8 (11-13:14-18) 1CT:2.12CT 1-3 (11-13) 1.0 (4-8 & 14-18)
SLQT1553-5
≤20%
±1V
1-3:5-7 (11-13:15-17) 1CT:1.5CT 4-8 (14-18) 3.5
4,000
1-3:4-8 (11-13:14-18) 1CT:2.5CT 1-3 (11-13) 1.0 (4-8 & 14-18)
SLQT1553-45
≤20%
±1V
1-3:5-7 (11-13:15-17) 1CT:1.79CT 4-8 (14-18) 3.5
4,000
FLAT PACK
1-3:4-8 (11-13:14-18) 1CT:1CT
1-3 (11-13) 3.5 (1-3 & 11-13)
SLQF1553-1
≤20%
±1V
1-3:5-7 (11-13:15-17) 1.4CT:1CT 4-8 (14-18) 3.5
4,000
1-3:4-8 (11-13:14-18) 1.4CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13)
SLQF1553-2
≤20%
±1V
1-3:5-7 (11-13:15-17) 2CT:1CT
4-8 (14-18) 3.2
7,200
1-3:4-8 (11-13:14-18) 1.25CT:1CT 1-3 (11-13) 3.2 (1-3 & 11-13)
SLQF1553-3
≤20%
±1V
1-3:5-7 (11-13:15-17) 1.66CT:1CT 4-8 (14-18) 3.0
4,000
1-3:4-8 (11-13:14-18) 1CT:2.12CT 1-3 (11-13) 1.0 (4-8 & 14-18)
SLQF1553-5
≤20%
±1V
1-3:5-7 (11-13:15-17) 1CT:1.5CT 4-8 (14-18) 3.5
4,000
1-3:4-8 (11-13:14-18) 1CT:2.5CT 1-3 (11-13) 1.0 (4-8 & 14-18)
SLQF1553-45
≤20%
±1V
1-3:5-7 (11-13:15-17) 1CT:1.79CT 4-8 (14-18) 3.5
4,000
GULL WING
1-3:4-8 (11-13:14-18) 1CT:1CT
1-3 (11-13) 3.5 (1-3 & 11-13)
SLQG1553-1
≤20%
±1V
1-3:5-7 (11-13:15-17) 1.4CT:1CT 4-8 (14-18) 3.5
4,000
1-3:4-8 (11-13:14-18) 1.4CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13)
SLQG1553-2
≤20%
±1V
1-3:5-7 (11-13:15-17) 2CT:1CT
4-8 (14-18) 3.2
7,200
1-3:4-8 (11-13:14-18) 1.25CT:1CT 1-3 (11-13) 3.2 (1-3 & 11-13)
SLQG1553-3
≤20%
±1V
1-3:5-7 (11-13:15-17) 1.66CT:1CT 4-8 (14-18) 3.0
4,000
1-3:4-8 (11-13:14-18) 1CT:2.12CT 1-3 (11-13) 1.0 (4-8 & 14-18)
SLQG1553-5
≤20%
±1V
1-3:5-7 (11-13:15-17) 1CT:1.5CT 4-8 (14-18) 3.5
4,000
1-3:4-8 (11-13:14-18) 1CT:2.5CT 1-3 (11-13) 1.0 (4-8 & 14-18)
SLQG1553-45
≤20%
±1V
1-3:5-7 (11-13:15-17) 1CT:1.79CT 4-8 (14-18) 3.5
4,000
_
_
NOTE: IPC/JDEC J-STD-020A Moisture Sensitivity Through Hole: Level 1 Surface Mount: Level 3
SLQT1553-1
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
≥45dB
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
75kHz to
1MHz
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
10K
@ 250Vdc
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
100Vrms
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
20
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
Low Profile / Stacked Dual THT and SMT
non-QPL Interface Transformers
Schematic
Mechanical
.630
MAX
16,00
Flat Pack
14
15
16
17
18
.630
16,00
MAX
1 (11)
.020 ± .002
0,51 ± 0,05
DIA. TYP.
13 12 11
5 (15)
6 (16)
2 (12)
8
7
6
5
4
1 2 3
4 (14)
7 (17)
8 (18)
3 (13)
.100 ± .008
TYP
2,54 ± 0,20
(12 PLACES)
.500
MIN
12,70
.630
MAX
16,00
.500 ± .008
12,54 ± 0,20
Through-Hole
18
.630
16,00
MAX
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
.280
MAX
7,11
1
2 3
5
16
6
15
7
13 12 11
1.125 ± .030
28,58 ± 0,76
.630
MAX
16,00
.020 ± .002
0,51 ± 0,05
DIA. TYP.
4
17
14
Surface Mount
.020 ± .002
0,51 ± 0,05
DIA. TYP.
.500 ± .008
12,54 ± 0,20
1.125 ± .030
28,58 ± 0,76
8
.630
16,00
MAX
14
15
16
17
18
13 12 11
1 2 3
8
7
6
5
4
.100 ± .008
TYP
2,54 ± 0,20
(12 PLACES)
.100 ± .008
TYP
2,54 ± 0,20
(12 PLACES)
.250 ± .030
6,35 ± 0,76
.280
MAX
7,11
.375
MIN
9,53
.070
REF
1,78
.004
MIN
0,10
.280
MAX
7,11
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
21
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
WARRANTY
Pulse Military Aerospace Division warrants for a period of 90
days from the date of shipment, that under normal use and service, its products will be free from defects in workmanship and
material. Pulse Military Aerospace Division’s sole responsibility
under this warranty is, at its option, to repair or replace, without
charge, any defective product or part, or to credit buyer for the
purchase price of such defective product, provided:
1) Buyer promptly notifies Pulse Military Aerospace Division in
writing within the warranty period, and
2) The defective product or part is returned to Pulse Military
Aerospace Division with transportation charges prepaid by
Buyer, and
3) Pulse Military Aerospace Division’s examination of such
product shall disclose to its satisfaction that said defect exists
and has not been caused by misuse, neglect, improper installation, repair or alteration, or accident.
EXCEPT FOR THE ABOVE WARRANTY AND THE
IMPLIED WARRANTY OF TITLE, PULSE MILITARY
AEROSPACE DIVISION MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE. NO
LIABILITY IS ASSUMED FOR EXPENDABLE ITEMS
SUCH AS LAMPS AND FUSES. PULSE MILITARY
AEROSPACE DIVISION WILL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES UNDER
ANY CIRCUMSTANCES.
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
22
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715
www.pulseeng.com
23
MC118 (1/08)
MIL-STD-1553 TRANSFORMERS
For More Information:
Pulse Worldwide
Headquarters
Pulse
Europe
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 7032 7806 0
Fax: 49 7032 7806 12
Pulse China Headquarters
Pulse North China
Pulse South Asia
Pulse North Asia
B402, Shenzhen Academy of
Aerospace Technology Building
10th Kejinan Rd.
High-Tech Zone
Nanshan District, Shenzhen
P.R. China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Room 1503
XinYin Building
No. 888 YiShan Rd.
Shanghai 200233
China
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
Tel: 86 21 32181071
Fax: 86 21 32181396
Tel: 65 6287 8998
Fax: 65 6280 0080
No. 26
Kao Ching Rd.
Yang Mei Chen
Taoyuan Hsien
Taiwan, R. O. C.
32667
Tel: 886 3 4643715
Fax: 886 3 4641911
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2008. Pulse Engineering, Inc. All rights reserved.
www.pulseeng.com
MC118 (1/08)
Similar pages