Amphenol C100F302J Low cost, solid state temperature sensor Datasheet

NTC Type C100
Thermometrics EpoxyCoated Chip Thermistor
Description
Features
Epoxy-coated chip thermistors with 0.012 in (0.3
mm) bare tinned-copper lead-wires.
•
Low cost, solid state temperature sensor
•
Suitable for use over range of -112°F to 302°F
(–80°C to 150°C)
•
High sensitivity greater than –4% /°C at 77°F
(25°C)
•
Suitable for temperature measurement,
control and compensation
•
High reliability and stability
•
Resin coated for good mechanical strength
and resistance to solvents
Amphenol
Advanced Sensors
Type C100
Specifications
Epoxy-coated chip thermistor
Select appropriate part number below for resistance and temperature tolerance desired.
R25°C
Material
System
R25°C ± 1%
R25°C ± 2%
R25°C ± 5%
R25°C ± 10%
2000
F
C100F202F
C100F202G
C100F202J
C100F202K
2252
F
C100F232F
C100F232G
C100F232J
C100F232K
3000
F
C100F302F
C100F302G
C100F302J
C100F302K
5000
F
C100F502F
C100F502G
C100F502J
C100F502K
10000
F
C100F103F
C100F103G
C100F103J
C100F103K
10000
Y
C100Y103F
C100Y103G
C100Y103J
C100Y103K
15000
F
C100F153F
C100F153G
C100F153J
C100F153K
20000
F
C100F203F
C100F203G
C100F203J
C100F203K
30000
H
C100H303F
C100H303G
C100H303J
C100H303K
50000
G
C100G503F
C100G503G
C100G503J
C100G503K
100000
Y
C100Y104F
C100Y104G
C100Y104J
C100Y104K
100000
G
C100G104F
C100G104G
C100G104J
C100G104K
1.5 in (38.1 mm)
Ø 0.1 in
(2.4 mm)
maximum
Tinned-copper alloy leads
Ø 0.01 in (0.3 mm)
NTC Type C100 Dimensions
Options
Data
Consult Thermometrics for availability of
options:
Thermal And Electrical Properties:
• Other resistance values in the range of 100 Ω to 100
kΩ
• Other tolerances
• Alternative lead lengths
• Other reference temperatures
• Alternative lead wires or lengths
Amphenol
Advanced Sensors
• Dissipation constant: (still air) 1 mW/°C (stirred oil) 8
mW/°C
• Thermal time constant: (still air) 10 seconds (stirred oil)
1 second
• Maximum power at 77°F (25°C) 75 mW; derated from
100% at 77°F (25°C) to 0% at 212°F (100°C)
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-517A-03/2014
Similar pages