GOOD-ARK E91127A Surface mount glass passivated single phase bridge rectifier Datasheet

E91127A
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1000V Output Current 1.2A
Features
•
•
•
•
•
•
Glass passivated Bridge Rectifiers
Ideal for automated placement
Very low profile - max height 1.2 mm
High surge current capability
Moisture sensitivity: level 1, per J-STD-020
High temperature soldering guaranteed: 260℃/10 seconds
Mechanical Data
case: E91
• Case:E91,Molding compound meets UL 94V-0 flammability rating
• Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22B102
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter,
Printer,Audio equipment,and Home Applications application
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
E91127A
Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average output rectified current
VRRM
VRMS
VDC
Io(AV)
1000
V
700
1000
1.2
V
V
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
45
A
I2t
TJ,
TSTG
8
A2s
150
°C
Rating for fusing (t≤8.3ms)
Operating junction and storage temperature range
Electrical Characteristics
Parameter
Test Conditions
Maximum instantaneous
forward voltage
IF=0.6A
IF=1.2A
(TA = 25 °C unless otherwise noted)
Symbol
0.95
VF
TA=25℃
Maximum DC reverse
current at rated DC blocking
TA=125℃
voltage
IR
Typical junction capacitance 4.0 V, 1 MHz
CJ
www.goodark.com
E91127A
1.0
Unit
Volts
5.0
µA
50
12
1/4
pF
2015.12-Rev.A
E91127A
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1000V Output Current 1.2A
Thermal Characteristics
Parameter
Test Conditions
Typical thermal resistance
juntion to ambient
(Ta=25℃ unless otherwixe noted)
1)
1)
juntion to case
2)
juntion to ambient
2)
juntion to case
Symbol
E91127A
RθJA
45
RθJC
12.6
RθJA
RθJC
29.8
Unit
℃/W
8.4
Note:1), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with recommended copper pads
2), The thermal resistance from junction to ambient and case, mounted on glass epoxy FR-4 P.C.B with 13*13mm copper pads
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve
Figure 2.Maximum Non-Repetitive Peak Forward
Surge Current
Pulse width=0.3ms
Figure 3. Typical Instantaneous Forward
Characteristics
www.goodark.com
Figure 4. Typical Reverse Characteristics
2/4
2015.12-Rev.A
E91127A
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1000V Output Current 1.2A
Package Outline Dimensions
Mounting Pad
layout,unit:mm
(Unit:mm)
Dim
A
C
D
HE
E
E1
L1
L2
Min
1.10
0.20
8.3
10.0
9.1
Nom.
1.17
0.25
8.4
10.2
9.30
5.28 REF
Max
1.20
0.35
8.6
10.4
9.5
1.4
1.0
1.60
1.2
1.80
1.4
www.goodark.com
Dim
L3
L4
L5
P1
P2
P3
P4
3/4
Min
5.7
0.6
1.4
Nom.
5.9
0.80
1.6
3.0 REF
7.4 REF
3.1 REF
3.68 REF
Max
6.1
1
1.8
2015.12-Rev.A
E91127A
Surface Mount Glass Passivated Single Phase Bridge Rectifier
Reverse Voltage 1000V Output Current 1.2A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Good-Ark product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a
third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of
any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product
improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark
Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product
information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also
pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means,
including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before
making a final decision on the applicability of the information and products. Suzhou Good-Ark
Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce
in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on
these materials or the products contained herein.
www.goodark.com
4/4
2015.12-Rev.A
Similar pages