Amphenol NPC-410-015-A-3-L Solid state reliability Datasheet

NPC-410 Series
Medium Pressure
Sensors
Applications
Features
•
•
•
•
•
•
•
•
•
•
Industrial automation
Air flow monitors
Process control
Medical equipment
Underground cable leak detection
Solid state reliability
±0.1% accuracy
PCB mountable package
DIP package
Individual device traceability
Description
The NPC-410 Series of solid state pressure sensors
are designed to provide a cost effective solution for
applications that require long-term stability and high
volume. Packaged in a dual-in-line configuration,
the NPC-410 Series is intended for printed circuit
board mounting. Optional pressure port and lead
configurations give superior flexibility in low profile
applications where pressure connection orientation
is critical.
The NPC-410 Series is based on NovaSensor’s advanced SenStable® piezoresistive sensing technology. The latest techniques in silicon micromachining
have been used to ion implant piezoresistive strain
gages into a Wheatstone bridge configuration, which
is integrally formed on a micromachined diaphragm.
Amphenol
Advanced Sensors
Constant current or constant voltage can be used
for sensor excitation. Offset and sensitivity temperature compensation and calibration can be achieved
by adding external resistors. Additionally, the NPC410 series is available in pressure ranges from 0 psi
to 5 psi (0 bar to 0.34 bar) through 0 psi to 100 psi
(0 bar to 7 bar). Please contact the NovaSensor for
other pressure ranges.
NPC-410 Specifications
Pressure Ranges
• Gauge and Differential: 5, 15, 30, 50 and 100 psi (0.34, 1, 2, 3.4 and
7 bar)
• Absolute: 15, 30, 50 and 100 psi (1.03, 2.06, 6.89 bar)
Parameter
Value
Units
Notes
–40 to 257
°F
(–40°C to 125°C)
–67°F to 302
°F
(–55°C to 150°C)
0.005
lb
(2.5 g)
Environmental
Temperature Range
Operating(9)
Storage
Mechanical
Weight
Media Compatibility
Positive differential and gage ports
Compatible with exposed materials
Absolute and negative differential ports
Dry gases only
6
0.60 in (15.24 mm)
0.1 in
(2.54 mm)
0.15 in
(3.8 mm)
8 7 6 5
0.6 in (15.24 mm
G6
0.2 in
(5.1 mm)
0.32 in
(8.1 mm)
1 2 3 4
0.12 in (3.05 mm)
0.37 in (9.4 mm)
Used for positive differential
L, S (See Notes)
Not used
for absolute
0.167 in
(4.2mm)
Diameter 0.127 in
(3.23 mm), Two tubes
NPC-410 Series schematic diagram
Not used
for gauge
Ceramic
substrate
(1)
8X 0.07 in
(1.78mm)
8X 0.34 in
(8.6 mm)
(3)
8X 0.02 in (0.51 mm)
1. Tube length; L = 0.490, S=0.325, N = No tube.
2. Lead pins can be either be in the same or the opposite direction of the pressure tube. Option (1)
has the leads in the “Up” position, the same direction as the tube. Option (3) has the leads in the
“Down” position, the opposite direction of the tube.
NPC-410 Series package diagram
NPC-410 Specifications
Parameter
Units
Minimum
Type
Maximum
Notes
Full Scale Output (FSO)
mV
105
125
155
Zero Pressure Output
mV
-50
0
50
2
Linearity
%FSO
—
—
0.1
3, 7
Pressure Hysteresis
%FSO
—
—
0.1
Input and Output Impedance
Ω
2500 4000
6000
Thermal Accuracy–Span
%FSO
—
1.5
—
2,4
Thermal Accuracy–Zero
%FSO
—
0.5
—
2,4
Coefficient-Resistance Temperature
%/°C
—
0.3
—
4
Thermal Hysteresis–Zero
%FSO
—
0.1
—
4
Pressure Overload
Rated
—
—
3X
5
Performance Parameters(1)
1. Ambient temperature = 77°F (25°C), unless otherwise noted Supply current = 1.5 mA.
2. External resistors can be added to reduce temperature errors and calibrate the offset and FSO.
3. Best fit straight line.
4. Temperature range 32°F to 140°F (0°C to 60°C), reference to 77°F (25°C).
5. 3X or 200 psi (13.78 bar) maximum, whichever is less.
6. Exposed materials are pyrex, ceramic, silicon, epoxy, RTV and stainless
steel.
7. 5 psi (0.34 bar) specifications: Linearity: 0.25 ±%FSO.
Ordering Information
The code number to be ordered may be specified as follows:
NPC-410
Code
Pressure Ranges
005
015
030
050
100
Code
Type
A
Absolute
G
Gauge
D
Differential
Lead Configuration
Up
Down
Code
1
3
Code
L
S
N
NPC-410
number
-
____ -
____
-
____
-
____
* Order NPC-410-XXXG-XN in place of NPC-410-XXXD-XN
Tube Options
Long
Short
None *
Typical model
Amphenol
Advanced Sensors
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-277B - 08/2014
Similar pages