Components E101SD1Z3RE E series sealed miniature toggle switch Datasheet

E Series
Sealed Miniature Toggle Switches
Features/Benefits
• Sealed against solder and cleaning
Typical Applications
• Telecommunications
• Instrumentation
• Medical equipment
process contaminants
•
•
•
•
UL 94V-0 Nylon case and bushing
Multi-positions
ESD protection available
RoHS compliant models available
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @
20 V AC or DC max. Q contact material: E1XX & E2XX
MODELS: 7.5 AMPS @ 125 V AC or 28 V DC;
3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @
125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page
F-25 for additional ratings.
ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break
cycles at full load. E3XX models: 30,000 cycles.
CONTACT RESISTANCE: Below 10 mΩ typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
ELECTROSTATIC DISCHARGE (ESD) OPTION: F1 conductive
bushing only. Dissipates up to 20,000 V DC from actuator
to ground.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
DEGREE OF PROTECTION: IP57; Protection against harmful dust
deposit, full-scale voltage protection, temporary immersion.
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0). F1 conductive bushing option is
impregnated with carbon fibers.
ACTUATOR: Brass, chrome plated with internal o-ring seal standard.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
SWITCH SUPPORT RETAINER: Stainless steel.
CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page F-29 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F–18 thru F–24. For additional options not shown in catalog, consult our Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
E101 SP, On-None-On
E103 SP, On-Off-On
E105 SP, Mom.-Off-Mom.
E107 SP, On-Off-Mom.
E108 SP, On-None-Mom.
E201 DP, On-None-On
E203 DP, On-Off-On
E205 DP, Mom.-Off-Mom.
E207 DP, On-Off-Mom.
E208 DP, On-None-Mom.
E211 DP, On-On-On
E213 DP, On-On-Mom.
E215 DP, Mom.-On-Mom.
E301 3P, On-None-On
Bushing
D1 .250" high
F1 Conductive,
.250" high*
D9 .280" high
Y Threaded, .350" high
Terminations
Right angle, PC thru-hole
A
AV2 Vertical right angle, PC thru-hole
C
PC Thru-hole
V3 .460" high, V-bracket
Z
Solder lug
A3 Right angle, PC thru-hole
AV3 Vertical right angle, PC thru-hole
V6 .460" high, V-bracket
V9 1.150" high, V-bracket
V31 .460" high, snap-in V-bracket
V61 .460" high, snap-in V-bracket
W .750" long, wire wrap
Z3 Quick connect
Contact Material
B Gold
P Gold, matte-tin
Q Silver
S Silver, matte-tin
G Gold over silver
R Gold over silver, matte-tin
F
Seal
E Epoxy
Toggle
* F1 available with SP and DP
versions only, please see
page F-19
Actuator
M .300" high
S .500" high
L3 Plastic, .940" high
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–17
www.ck-components.com
E Series
Sealed Miniature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
SP
MODEL NO.
POS. 2
CONNECTED TERMINALS
POS. 3
POS. 1
C&K marking on opposite side
E101
ON
NONE
ON
E103
ON
OFF
ON
E105
MOM.
OFF
MOM.
E107
ON
OFF
MOM.
E108
ON
NONE
MOM.
POS. 2
POS. 3
C&K marking on opposite side
SCHEMATIC
2-3
N/A
2-1
2-3
OPEN
2-1
2-3
N/A
2-1
SPDT
SPDT
Terminal Numbers
For Reference Only
Part number shown: E101SD1CBE
E201
ON
NONE
ON
E203
ON
OFF
ON
E205
MOM.
OFF
MOM.
E207
ON
OFF
MOM.
E208
ON
NONE
MOM.
E211 **
ON
ON
ON
E213**
ON
ON
MOM.
E215**
MOM.
ON
MOM.
2-3,5-6
N/A
2-1,5-4
2-3,5-6
OPEN
2-1,5-4
2-3,5-6
N/A
2-1,5-4
2-3,5-6
2-3,5-4
2-1,5-4
DP
DPDT
DPDT
Terminal Numbers
For Reference Only
Part number shown: E201SD1CBE
MOM. = Momentary
All models
** Wiring for 3-way switch, see Section N.
with all options when ordered with G,R, Q or S contact material except with F1 conductive bushing.
Toggle
F
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–18
www.ck-components.com
E Series
Sealed Miniature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
CONNECTED TERMINALS
POS. 3
POS. 1
POS. 2
C&K marking on opposite side
E301
3P
POS. 2
ON
NONE
POS. 3
C&K marking on opposite side
ON
2-3,5-6,8-9
N/A
SCHEMATIC
2-1,5-4,8-7
3PDT
3PDT
Terminal Nos.
For Reference Only
Part number shown: E301SD1CBE
MOM. = Momentary
All models
** Wiring for 3-way switch, see Section N.
with all options when ordered with G, R, Q or S contact material except with F1 conductive bushing.
ACTUATOR COLOR
ACTUATOR
ACTUATOR
M
S
.300" HIGH
L3
.500" HIGH
PLASTIC, .940"
? HIGH
*
*
Gloss plastic
OPTION
CODE
*
2
L3 ACTUATOR COLOR
BLACK
Chrome finish
Standard when ordered with
A, A3, AV2, AV3, V2-V61 terminations.
Finish: Chrome.
Other colors available, consult Customer
Service Center. No color choice required
for S & M actuators.
Standard when ordered with
C, Z, Z3, W & W4 terminations.
Finish: Chrome
* Actuators shown with standard D1 bushing. Subtract .030 (0,76) for D9 bushing. Subtract .100 (2,54) for Y bushing.
BUSHING
D1
F1
.250" HIGH, UNTHREADED
D9
.280" HIGH, UNTHREADED
Y
THREADED, INSULATED, .350" HIGH
WITH KEYWAY
ESD CONDUCTIVE BUSHING,
.250" HIGH, UNTHREADED
F1 bushing is not
UL/CSA approved
1/4-40 UNS-2A
PANEL MOUNTING
Available with M & S actuator options and A, A3, AV2,
AV3, V3-V61 termination options.
E3XX models not available with D9 bushing.
NOTE: Internal o-ring actuator seal standard for
all bushing options.
Available only with C, Z, Z3, & W terminations.
Available for 1&2 pole only.
Hardware: One dress nut part number 299D01201,
one hex nut part number 540400201 and lockwasher
part number 700303202 supplied standard.
Will withstand 4 in.-lbs. of torque with no distortion.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–19
www.ck-components.com
F
Toggle
ESD protection depends on proper grounding of switch
support bracket. F1 conductive bushing option is
impregnated with carbon fibers; dissipates electrostatic
discharge (ESD) up to 20,000 V from actuator to ground.
E Series
Sealed Miniature Toggle Switches
TERMINATIONS
Z
C
SOLDER LUG
Not available with F1 conductive bushing
or P, R or S contact material.
SPDT thru 3PDT
Z3
SPDT thru 3PDT
PC MOUNTING
Not available with F1 conductive bushing.
QUICK CONNECT
SPDT thru 3PDT
A
PC THRU-HOLE
Not available with F1 conductive bushing or P, R
or S contact material. Mating quick connector
available; order part number 530100000, page F-26.
RIGHT ANGLE, PC THRU-HOLE
Actuator Shown In Pos. 1
SECTION A-A
E101MD1ABE
Terminal Nos. For Reference Only
A3
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
Horizontal Actuation
SPDT
Not available with Y bushing.
Terminal bend radii and lead-in manufacturing option.
A
RIGHT ANGLE, PC THRU-HOLE
Actuator Shown In Pos. 1
SECTION A-A
A3
Terminal Nos. For Reference Only
RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
E201MD1ABE
Horizontal Actuation
DPDT
Toggle
F
Not available with Y bushing.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–20
www.ck-components.com
E Series
Sealed Miniature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
E301MD1ABE
Horizontal Actuation
Actuator Shown In Pos. 1
SECTION A-A
3PDT
Terminal Nos. For Reference Only
Not available with D9 & Y bushings.
Terminal bend radii and lead-in manufacturing option.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E101MD1AV2BE
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
SPDT
AV3
PC MOUNTING
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
Not available with Y bushing.
Terminal bend radii and lead-in manufacturing option.
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E201MD1AV2BE
Vertical Actuation
SECTION A-A
Actuator Shown In Pos. 1
PC MOUNTING
DPDT
A3
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
F
Toggle
Not available with Y bushing.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–21
www.ck-components.com
E Series
Sealed Miniature Toggle Switches
TERMINATIONS
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E301MD1AV2BE
Vertical Actuation
AV3
3PDT
SECTION A-A
Actuator Shown In Pos. 1
PC MOUNTING
VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
.150" PITCH
Not available with D9 & Y bushings.
Terminal bend radii and lead-in manufacturing option.
V6
V61
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E101MD1__BE
SPDT
SNAP-IN
OPTION
CODE
DIM ‘A’
V6, V61
.460 (11,68)
Actuator Shown In Pos. 1
Not available with Y bushing.
V6
V61
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
VERTICAL MOUNT, V-BRACKET, SNAP-IN
E201MD1__BE
DPDT
F
Toggle
SNAP-IN
OPTION
CODE
DIM ‘A’
V6, V61
.460 (11,68)
Actuator Shown In Pos. 1
Not available with Y bushing.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–22
www.ck-components.com
E Series
Sealed Miniature Toggle Switches
TERMINATIONS
V3, V9
V31
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE
DIM ‘A’
SNAP-IN
E101MD1__BE
SPDT
V3, V31
.460 (11,68)
V9
1.150 (29,21)
Actuator Shown In Pos. 1
Not available with Y bushing.
V3, V9
V31
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE
SNAP-IN
E201MD1__BE
DPDT
DIM ‘A’
V3, V31
.460 (11,68)
V9
1.150 (29,21)
Actuator Shown In Pos. 1
Not available with Y bushing.
V9
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
E301MD1__BE
OPTION
CODE
DIM ‘A’
V9
1.150 (29,21)
SNAP-IN
3PDT
F
Toggle
Actuator Shown In Pos. 1
Not available with D9 & Y bushings.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–23
www.ck-components.com
E Series
Sealed Miniature Toggle Switches
CONTACT MATERIAL
OPTION
CODE
B
CONTACT
MATERIAL
GOLD 1
P
Q
R
RATINGS
GOLD 1
LOW LEVEL/
MATTE-TIN 6
DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
SILVER 5
SILVER 4,5
MATTE-TIN 6
POWER
GOLD OVER
GOLD 3
LOW LEVEL/DRY
S
G
TERMINAL
PLATING
SILVER
2,3
MATTE-TIN
6
E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC OR 28 V DC;
3 AMPS @ 250 V AC.
E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
CIRCUIT OR POWER
E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR
7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @
125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
END CONTACTS: Coin silver, silver plated.
NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant.
All models
with all options when ordered with S, R, G, or Q contact material except
with F1 conductive bushing.
B contact material standard with all terminations.
P, S & R contact materials not available with Z & Z3 terminations.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver
plate. Or copper alloy, silver plated.
6
TERMINALS: Copper alloy, with matte-tin over nickel plate.
Toggle
F
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
F–24
www.ck-components.com
Similar pages