YAGEO CL0508KRX7R7BB121 Surface-mount ceramic multilayer capacitor Datasheet

DATA SHEET
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
Low-Inductance
X5R / X7R
6.3 V TO 50 V
10 nF to 1 uF
Product Specification – November 21, 2016 V.1
RoHS compliant & Halogen Free
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
6.3V to 50V
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP
This specification describes Midvoltage X7R series chip capacitors
with lead-free terminations
CTC
All part numbers are identified by the series, size, tolerance, TC material,
packing style, voltage, process code, termination and capacitance value.
APPLICATIONS
High speed IC packages
YAGEO BRAND ordering code
Processor package decoupling
GLOBAL PART NUMBER ( PREFERRED )
AC noise reduction in multi-chip
modules.
CL
FEATURES
Supplied in tape on reel
Nickel-barrier end termination
RoHS compliant
Halogen Free compliant
2
13
XXXX X X XXX X
(1)
(2) (3)
(4)
(5)
BB
XXX
(6)
(1) SIZE – INCH BASED (METRIC)
0204(0510)
0306(0816)
0508(1220)
0612(1632)
(2) TOLERANCE
K = ± 10%
M = ± 20%
(3) PACKING STYLE
R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
(4) TC MATERIAL
X5R / X7R
(5) RATED VOLTAGE
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
(6) CAPACITANCE VALUE
2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 121 = 12 x 101 = 120 pF
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
6.3V to 50V
3
13
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered
with a layer of plated tin (NiSn).
The terminations are lead-free. A
cross section of the structure is
shown in Fig.1.
Fig. 1 Surface mounted multilayer ceramic capacitor construction
DIMENSION
OUTLINES
Table 1 For outlines see fig. 2
TYPE
L1 (mm)
W (mm)
T (mm)
L2 / L3 (mm)
min.
max.
L4 (mm)
For dimension see Table 1
min.
0204
0.5 ± 0.1
1.0 ± 0.1
0.3 ± 0.1
0.1
0.3
0.1
0306
0.8 ± 0.15
1.6 ± 0.2
0.5 ± 0.1
0.1
0.3
0.2
0508
1.25 ± 0.2
2.0 ± 0.2
0.85 ± 0.1
0.13
0.46
0.38
0612
1.6 ± 0.2
3.2 ± 0.2
0.85 ± 0.1
0.13
0.46
0.50
0612*
1.6 ± 0.2
3.2 ± 0.2
1.15 ± 0.1
0.13
0.46
0.50
Fig. 2 Surface mounted multilayer
ceramic capacitor dimension
0612*: 1uF/16V, 470nF~1uF/25V, 120nF~470nF/50V
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
6.3V to 50V
4
13
CAPACITANCE RANGE & THICKNESS FOR X5R
Table 2
Sizes from 0204
CAP.
0204
6.3 V / 10V
10 nF
0.3 ± 0.1
15 nF
0.3 ± 0.1
22 nF
0.3 ± 0.1
33 nF
0.3 ± 0.1
47 nF
0.3 ± 0.1
68 nF
0.3 ± 0.1
100 nF
0.3 ± 0.1
150 nF
220 nF
330 nF
470 nF
680 nF
1 uF
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For special ordering code, please contact local sales force before order.
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
6.3V to 50V
5
13
CAPACITANCE RANGE & THICKNESS FOR X7R
Table 3
CAP.
Sizes from 0306 to 0508
0306
0508
6.3 V / 10V
10 V
16 V
25 V
10 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
15 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
22 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
33 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
47 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
68 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
100 nF
0.5 ± 0.1
150 nF
220 nF
0.5 ± 0.1
330 nF
470 nF
0.85 ± 0.1
680 nF
1 uF
0.85 ± 0.1
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For special ordering code, please contact local sales force before order.
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
6.3V to 50V
6
13
CAPACITANCE RANGE & THICKNESS FOR X7R
Table4
Sizes from 0612
CAP.
0612
6.3 V
10 V
16 V
25 V
50 V
10 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
15 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
22 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
33 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
47 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
68 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
100 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
150 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
220 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
330 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
470 nF
0.85 ± 0.1
0.85 ± 0.1
0.85 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
680 nF
1.15 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
1 uF
1.15 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
1.15 ± 0.1
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-6 series is on request
3. For special ordering code, please contact local sales force before order
THICKNESS CLASSES AND PACKING QUANTITY
Table 5
SIZE
CODE
THICKNESS
CLASSIFICATION
TAPE WIDTH
QUANTITY PER REEL
0204
Ø 180 MM / 7 INCH
Paper
Blister
Ø 330 MM / 13 INCH
Paper
Blister
QUANTITY
PER BULK CASE
0.3 ± 0.1 mm
8 mm
10,000
---
---
---
---
0306
0.5 ± 0.1 mm
8 mm
4,000
---
15,000
---
---
0508
0.85 ± 0.1 mm
8 mm
4,000
---
15,000
---
---
0612
0.85 ± 0.1 mm
8 mm
4,000
---
15,000
---
---
0612
1.15 ± 0.1 mm
8 mm
---
3,000
---
---
---
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
7
13
6.3V to 50V
ELECTRICAL CHARACTERISTICS
X7R DIELECTRIC CAPACITORS;
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
-
Temperature: 15 °C to 35 °C
Relative humidity: 25% to 75%
Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
Table 6
DESCRIPTION
Capacitance range
VALUE
10 nF to 1 uF
Capacitance tolerance
X5R / X7R
± 10%, ± 20%
Dissipation factor (D.F.)
X5R / X7R
Insulation resistance after 1 minute at Ur (DC)
≤5%
Rins ≥ 10 GΩ or Rins × C ≥ 500 seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient):
X5R / X7R
± 15%
Operating temperature range:
X5R
–55 °C to +85 °C
X7R
–55 °C to +125 °C
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
6.3V to 50V
8
13
SOLDERING RECOMMENDATION
Table 7
SIZE
SOLDERING
METHOD
0204
0306
0508
0612
O
O
O
O
Reflow
Reflow/Wave
TESTS AND REQUIREMENTS
Table 8
Test procedures and requirements
TEST
TEST
METHOD
PROCEDURE
REQUIREMENTS
Mounting
IEC
6038421/22
4.3
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Visual Inspection
and Dimension
Check
4.4
Any applicable method using × 10 magnification
In accordance with specification
Capacitance
4.5.1
Class 2:
f = 1 KHz, measuring at voltage 1 Vrms at 20 °C
Within specified tolerance
Dissipation
Factor (D.F.)
4.5.2
Class 2:
f = 1 KHz, measuring at voltage 1 Vrms at 20 °C
In accordance with specification
Insulation
Resistance
4.5.3
At Ur (DC) for 1 minute
In accordance with specification
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
TEST
TEST
METHOD
Temperature
coefficient
4.6
Low
Inductance
X5R, X7R
6.3V to 50V
9
13
PROCEDURE
REQUIREMENTS
Capacitance shall be measured by the steps shown
in the following table.
Class2:
X7R/X5R : ∆ C/C : ± 15%
The capacitance change should be measured after
5 min at each specified temperature stage.
In case of applying voltage, the capacitance
change should be measured after 1 more min.
with applying voltage in equilibration of each
temp. stage.
Step
Temperature(℃)
a
25± 2
b
Lower temperature± 3℃
c
25± 2
d
Upper Temperature± 2℃
e
25± 2
Class II
Capacitance Change shall be calculated from the
formula as below
C2 - C1
∆C =
x 100%
C1
C1: Capacitance at step c
C2: Capacitance at step b or d
Adhesion
Bending
Strength
IEC
6038421/22
4.7
A force applied for 10 seconds to the line joining
the terminations and in a plane parallel to the
substrate
Force
size ≥ 0306: 5N
size = 0204: 2.5N
4.8
Mounting in accordance with IEC 60384-22
paragraph 4.3
No visible damage
Conditions: bending 1 mm at a rate of 1 mm/s,
radius jig 5 mm
∆C/C
Class2:
X7R/X5R : ± 10%
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
TEST
TEST
METHOD
Resistance to
Soldering Heat
4.9
6.3V to 50V
10
13
REQUIREMENTS
Precondition: 150 +0/–10 °C for 1 hour,
then keep for 24 ± 1 hours at room
temperature
Dissolution of the end face plating shall not exceed
25% of the length of the edge concerned
Preheating: 120 °C to 150 °C for 1 minute
and 170 °C to 200 °C for 1 minute.
Class2:
Dipping time: 10 ± 0.5 seconds
Recovery time: 24 ± 2 hours
4.10
X5R, X7R
PROCEDURE
Solder bath temperature: 260 ± 5 °C
Solderability
Low
Inductance
Preheated the temperature of 80 °C to 140
°C and maintained for 30 seconds to 60
seconds.
∆C/C
X7R/X5R : ± 10%
D.F. within initial specified value
Rins within initial specified value
The solder should cover over 95% of the critical area
of each termination
Test conditions for leadfree containing
solder alloy
Temperature: 245 ± 5 °C
Dipping time: 3 ± 0.3 seconds
Depth of immersion: 10 mm
Rapid Change
of Temperature
IEC
6038421/22
4.11
Preconditioning;
150 +0/–10 °C for 1 hour, then keep for
24 ± 1 hours at room temperature
5 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
Recovery time 24 ± 2 hours
No visual damage
∆C/C
Class2:
X7R/X5R : ± 15%
D.F. meet initial specified value
Rins meet initial specified value
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
TEST
Damp Heat
with Ur load
TEST METHOD
4.13
Low
Inductance
X5R, X7R
6.3V to 50V
PROCEDURE
REQUIREMENTS
1. Preconditioning, class 2 only:
No visual damage after recovery
150 +0/-10 °C /1 hour, then keep for
24 ± 1 hour at room temp
2. Initial measure:
Spec: refer initial spec C, D, IR
3. Damp heat test:
500 ± 12 hours at 40 ± 2 °C;
90 to 95% R.H; 1.0 Ur applied.
4. Recovery:
Class 1: 6 to 24 hours
Class 2: 24 ± 2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the
minimum value permitted, then after the other
measurements have been made the capacitor shall
be precondition according to “IEC 60384 4.1” and
then the requirement shall be met.
11
13
∆C/C
Class2:
X7R/X5R : ± 20%
D.F.
Class2:
X7R/X5R : ≤ 2 x specified value
Rins
Class2:
X7R/X5R : ≥ 500 MΩ or Rins x Cr ≥ 25s
whichever is less
Δ C/C
Class2:
X7R/X5R : ± 25%
D.F.
Class2:
X7R/X5R : ≤ 2 x specified value
Rins
Rins x Cr ≥ 25Ω· F
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Endurance
IEC 6038421/22
1. Preconditioning, class 2 only:
No visual damage
4.14
150 +0/-10 °C /1 hour, then keep for
24 ± 1 hour at room temp
2. Initial measure:
Spec: refer initial spec C, D, IR
3. Endurance test:
Temperature: NP0: 125 °C
Specified stress voltage applied for 1,000
hours:
Applied 2.0 x Ur for general product
Temperature: X7R: 125°C Specified stress
voltage applied for 1,000 hours:
Recovery time: 24 ± 2 hours
4. Final measure: C, D, IR
P.S. If the capacitance value is less than the
minimum value permitted, then after the other
measurements have been made the capacitor
shall be precondition according to “IEC 60384
4.1” and then the requirement shall be met.
6.3V to 50V
12
13
∆C/C
Class2:
X7R/X5R : ± 20%
D.F.
Class2:
X7R/X5R : ≤ 2x initial value max
Rins
Class2:
X7R/X5R : ≥ 1,000 MΩ or
Rins x Cr ≥ 50s whichever is less
Δ C/C
Class2:
X7R/X5R : ± 25%
D.F.
Class2:
X7R/X5R : ≤ 2x initial value max
Rins
Class2:
Rins x Cr ≥ 50 Ω· F
Voltage
Proof
IEC 60384-1
4.5.4
Specified stress voltage applied for 1 to 5
seconds
Ur ≤ 100 V: series applied 2.5 Ur
Charge/Discharge current less than 50mA
No breakdown or flashover
www.yageo.com
Nov. 21, 2016 V.1
Product specification
Surface-Mount Ceramic Multilayer Capacitors
Low
Inductance
X5R, X7R
6.3V to 50V
13
13
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 1
Nov. 7, 2016
-
- Add 13" packing
Version 0
Jun. 26, 2015
-
- New
www.yageo.com
Nov. 21, 2016 V.1
Similar pages